FS: 6 Cylinder Air Cleaner Assembly / PB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7T1BURB · 03-03-2004, 12:00 PM

Originally intended for use in the restoration of a "back to bone-stock" 292 6 cylinder with power brakes, this air cleaner is offset to provide brake booster clearance on 6 cylinder models equipped with power brakes....This GM Severe Duty Air Cleaner comes with all the necesary hardware and fasteners ( carb riser with hose, heat tube, engine support bracket, threaded studs, ec). and is in really excellent condition...ready to bolt on and go if desired, it will, however, require repainting to return it to "as new" condition. Not banged up, dented or dinged. Price for everything listed is $60 (will not separate) plus $8.50 shipped to any CONUS location. Please reply to this thread ONLY if you are interested. No PMs or E-mails please. I have pics if you would like me to send them (can't quite figure out how to post them on the Board). Appreciate you taking the time to read about this item!

Thanks!....7T1BURB

**CPNE** · 03-03-2004, 12:24 PM

Put me 1st in line

7T1BURB · 03-03-2004, 03:19 PM

Sold to "Bone-Stock" CPNE....

CPNE: PM sent for payment instructions. Please include your shipping address with M/O per PM.

Thanks....7T1BURB

chucks70 · 03-03-2004, 05:26 PM

Rasafrasa ##!! Been looking for one of these but my timing has always been a little off. If anyone else has one, shoot me price with shipping. CPNE if you don't use it let me know.

**PICKMUP** · 03-03-2004, 08:49 PM

Chuck, I think I can fix you up. I'll let you know in a day or two, when it comes in.

chucks70 · 03-04-2004, 12:13 PM

PICKMUP would appreciate it very much.
Thanks.

**CPNE** · 03-04-2004, 12:33 PM

chucks70, sorry. MO on the way. Hopefully Frank can fix you up.

**PICKMUP** · 03-04-2004, 04:30 PM

SOLD---Here you go! You have first call on this.
It is "complete" with the the carb spacer, carb mounting rod and engine mount support rod.

$80 boxed & shipped to you.

SOLD- Thanks Chuck.

Your mailbox is full. I will get you info later and discuss your pulleys.

**PICKMUP** · 03-04-2004, 04:35 PM

I will just add this here first, for you six guys that have been following this thread. This is a complete 250 PS system. I am including the crank balancer & engine pulleys, with brackets to insure it will all line up on your motor.

$125 + 25 to box & ship.

I will run a separate thread later, if it doesn't go here first.

**PICKMUP** · 03-04-2004, 04:42 PM

This is for a 250 or 292. It has the separate coil, which makes it easy to run one of the new after market stand alone hot coils...like I do on my "Hot Six" 292. Only one 12 volt wire to hook up.

$40 boxed & shipped to you.

**PICKMUP** · 03-04-2004, 11:16 PM

I run a red MSD coil on a red engine with red wires so it is a little hard to show in pics. It ALL looks red!

71402BB · 03-05-2004, 08:43 PM

PICKMUP- I'm interested in that I-6 HEI you have! As long as it works, I'll take it! So you want $40.00 for it shiped to my door!?!?! Let me know, Thanks -Brian

Oh ya before I forget http://67-72chevytrucks.com/vboard/s...threadid=93912

Kas68c10 · 03-06-2004, 02:13 PM

I think I have one of those cleaners in the garage, if someone still needs one ,let me know, I will do a little diggin

70-K10-292 · 03-06-2004, 09:29 PM

Damn, Too late again,wouldn't happen to have another Hei setup hanging around ?

**PICKMUP** · 03-06-2004, 11:30 PM

YES!

70-K10-292 · 03-07-2004, 10:42 AM

You do ! How much ? PM me.

03-03-2004, 12:00 PM	#1
7T1BURB Registered User Join Date: Aug 2002 Location: Newport News, VA Posts: 190	FS: 6 Cylinder Air Cleaner Assembly / PB Originally intended for use in the restoration of a "back to bone-stock" 292 6 cylinder with power brakes, this air cleaner is offset to provide brake booster clearance on 6 cylinder models equipped with power brakes....This GM Severe Duty Air Cleaner comes with all the necesary hardware and fasteners ( carb riser with hose, heat tube, engine support bracket, threaded studs, ec). and is in really excellent condition...ready to bolt on and go if desired, it will, however, require repainting to return it to "as new" condition. Not banged up, dented or dinged. Price for everything listed is $60 (will not separate) plus $8.50 shipped to any CONUS location. Please reply to this thread ONLY if you are interested. No PMs or E-mails please. I have pics if you would like me to send them (can't quite figure out how to post them on the Board). Appreciate you taking the time to read about this item! Thanks!....7T1BURB

03-03-2004, 12:24 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Put me 1st in line __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-03-2004, 05:26 PM	#4
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	Rasafrasa ##!! Been looking for one of these but my timing has always been a little off. If anyone else has one, shoot me price with shipping. CPNE if you don't use it let me know. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

03-03-2004, 08:49 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Maybe Chuck, I think I can fix you up. I'll let you know in a day or two, when it comes in. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-04-2004, 12:13 PM	#6
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	PICKMUP would appreciate it very much. Thanks. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

03-03-2004, 03:19 PM	#3
7T1BURB Registered User Join Date: Aug 2002 Location: Newport News, VA Posts: 190	Sold to "Bone-Stock" CPNE.... CPNE: PM sent for payment instructions. Please include your shipping address with M/O per PM. Thanks....7T1BURB

03-04-2004, 12:33 PM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	chucks70, sorry. MO on the way. Hopefully Frank can fix you up. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-04-2004, 04:30 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	SOLD TO---Chucks70 SOLD---Here you go! You have first call on this. It is "complete" with the the carb spacer, carb mounting rod and engine mount support rod. $80 boxed & shipped to you. SOLD- Thanks Chuck. Your mailbox is full. I will get you info later and discuss your pulleys. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 03-05-2004 at 02:40 AM.

03-04-2004, 04:35 PM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	...and power steering I will just add this here first, for you six guys that have been following this thread. This is a complete 250 PS system. I am including the crank balancer & engine pulleys, with brackets to insure it will all line up on your motor. $125 + 25 to box & ship. I will run a separate thread later, if it doesn't go here first. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-04-2004, 04:42 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	...And an HEI! This is for a 250 or 292. It has the separate coil, which makes it easy to run one of the new after market stand alone hot coils...like I do on my "Hot Six" 292. Only one 12 volt wire to hook up. $40 boxed & shipped to you. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 03-04-2004 at 11:11 PM.

03-04-2004, 11:16 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Red/red/red I run a red MSD coil on a red engine with red wires so it is a little hard to show in pics. It ALL looks red! Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-05-2004, 08:43 PM	#12
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	PICKMUP- I'm interested in that I-6 HEI you have! As long as it works, I'll take it! So you want $40.00 for it shiped to my door!?!?! Let me know, Thanks -Brian Oh ya before I forget http://67-72chevytrucks.com/vboard/s...threadid=93912 __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

03-06-2004, 02:13 PM	#13
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	I think I have one of those cleaners in the garage, if someone still needs one ,let me know, I will do a little diggin __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

03-06-2004, 09:29 PM	#14
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	Damn, Too late again,wouldn't happen to have another Hei setup hanging around ? __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

03-06-2004, 11:30 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	70-K10-292 YES! __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

03-07-2004, 10:42 AM	#16
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	You do ! How much ? PM me. __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

Register or Log In To remove these advertisements.