CA Tire carrier wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**macs61** · 01-23-2021, 10:43 PM

Looking for 61 c10 rear fender tire carrier any help will be appreciated.

1960chevypanel · 01-24-2021, 04:04 AM

Longbed or short? I'm assuming stepside..

**macs61** · 01-24-2021, 01:03 PM

stepside bed

**DPowers** · 01-24-2021, 05:04 PM

Does your fender have the cutout?

**macs61** · 01-24-2021, 05:21 PM

will be installing fender with cut out

**DPowers** · 01-24-2021, 05:29 PM

Have this one in East TN. Came off a 63. $75.00 but shipping would probably be a killer.

**macs61** · 01-24-2021, 05:35 PM

Do arms unbolt to package better

**DPowers** · 01-24-2021, 05:43 PM

Looks like welded to the plate. Give me a zip and I will at least check for you.

**macs61** · 01-24-2021, 05:50 PM

my zip is 94566 Do you think it clean up good if i get it sand blasted.if so i will buy it need one for my project.

**DPowers** · 01-24-2021, 05:55 PM

Quote:

Originally Posted by macs61

my zip is 94566 Do you think it clean up good if i get it sand blasted.if so i will buy it need one for my project.

Let me figure out shipping. Yes I believe it will clean up good.

**macs61** · 01-24-2021, 05:57 PM

Thank you consider it sold

**DPowers** · 01-25-2021, 06:57 PM

Quote:

Originally Posted by macs61

Thank you consider it sold

PM sent

**macs61** · 01-25-2021, 07:24 PM

DPowers ent you reply

NVS-C10 · 01-26-2021, 05:44 AM

I'm looking for one of these as well if anyone else has one for sale

doobiebro · 01-26-2021, 12:19 PM

Quote:

Originally Posted by NVS-C10

I'm looking for one of these as well if anyone else has one for sale

I might have a spare. Let me look for it. Also I believe there is a small little bracket missing from the pic above. Let me verify that.

NVS-C10 · 01-26-2021, 12:32 PM

Quote:

Originally Posted by doobiebro

I might have a spare. Let me look for it. Also I believe there is a small little bracket missing from the pic above. Let me verify that.

Thanks!

doobiebro · 01-27-2021, 03:02 PM

Quote:

Originally Posted by NVS-C10

Thanks!

NVS-C10 I looked all last night and I'm missing the main part which is the spare tire mount carrier. If you look at the 1st pic a complete set up comes with 2 long brackets, small corner bracket and spare tire carrier. I actually have them powder coated. I found them stored away in a cabinet. They are just full of dust. The complete set is going on my truck. Let me keep looking for the missing piece for the spare set. Sorry about that.

**907burb** · 01-29-2021, 01:12 AM

If doobiebro can't get the carrier for you, I have a complete set.

NVS-C10 · 01-29-2021, 04:11 AM

Quote:

Originally Posted by 907burb

If doobiebro can't get the carrier for you, I have a complete set.

Shoot me pics and price, thanks

**macs61** · 01-29-2021, 06:52 PM

doobiebo got tire carrier off b powers but missing bracket are your spare brackets for sale lf so l will buy them shipped to 94566. thanks walt.

**907burb** · 01-30-2021, 12:15 AM

Here is a picture of the brackets I have. I pulled them off of a 60 Chevy. These were all the brackets that were used on the 60.

**macs61** · 01-30-2021, 12:45 AM

So the other bracket is on the fender itself am i correct

NVS-C10 · 01-30-2021, 06:31 AM

Quote:

Originally Posted by 907burb

Here is a picture of the brackets I have. I pulled them off of a 60 Chevy. These were all the brackets that were used on the 60.

Looks good.. shoot me a price shipped to Rosemead, CA 91770

Thanks!

**907burb** · 01-30-2021, 12:59 PM

Price on the brackets is 75.00 dollars. Shipping to your zip is 66.50 through USPS, which is the cheapest way to ship from AK. The bracket is welded together so the box is large to accommodate the bracket. Total to your door is 141.50. To MACS61, yes the small bracket goes on the top of the fender. It secures the fender to the top of the bed.

NVS-C10 · 01-30-2021, 03:03 PM

Quote:

Originally Posted by 907burb

Price on the brackets is 75.00 dollars. Shipping to your zip is 66.50 through USPS, which is the cheapest way to ship from AK. The bracket is welded together so the box is large to accommodate the bracket. Total to your door is 141.50. To MACS61, yes the small bracket goes on the top of the fender. It secures the fender to the top of the bed.

Ok shoot me your PayPal email

01-23-2021, 10:43 PM	#1
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Tire carrier wanted Looking for 61 c10 rear fender tire carrier any help will be appreciated.

01-24-2021, 04:04 AM	#2
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Tire carrier wanted Longbed or short? I'm assuming stepside..

01-24-2021, 01:03 PM	#3
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted stepside bed

01-24-2021, 05:04 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Tire carrier wanted Does your fender have the cutout? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-24-2021, 05:21 PM	#5
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted will be installing fender with cut out

01-24-2021, 05:29 PM	#6
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Tire carrier wanted Have this one in East TN. Came off a 63. $75.00 but shipping would probably be a killer. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-24-2021, 05:35 PM	#7
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted Do arms unbolt to package better

01-24-2021, 05:43 PM	#8
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Tire carrier wanted Looks like welded to the plate. Give me a zip and I will at least check for you. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-24-2021, 05:50 PM	#9
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted my zip is 94566 Do you think it clean up good if i get it sand blasted.if so i will buy it need one for my project.

01-24-2021, 05:57 PM	#11
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted Thank you consider it sold

01-25-2021, 07:24 PM	#13
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted DPowers ent you reply

01-26-2021, 05:44 AM	#14
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: Tire carrier wanted I'm looking for one of these as well if anyone else has one for sale __________________ My 65 SWB YouTube Build http://67-72chevytrucks.com/vboard/s...d.php?t=843040 My 63 SWB BBW Build Frank http://67-72chevytrucks.com/vboard/s...d.php?t=691690 My YouTube Channel - R9 Garage https://www.youtube.com/c/R9garage?sub_confirmation=1

01-29-2021, 01:12 AM	#18
907burb Active Member Join Date: Nov 2017 Location: Palmer, Alaska Posts: 196	Re: Tire carrier wanted If doobiebro can't get the carrier for you, I have a complete set.

01-29-2021, 06:52 PM	#20
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted doobiebo got tire carrier off b powers but missing bracket are your spare brackets for sale lf so l will buy them shipped to 94566. thanks walt.

01-30-2021, 12:15 AM	#21
907burb Active Member Join Date: Nov 2017 Location: Palmer, Alaska Posts: 196	Re: Tire carrier wanted Here is a picture of the brackets I have. I pulled them off of a 60 Chevy. These were all the brackets that were used on the 60. Attached Images



Register or Log In To remove these advertisements.

01-30-2021, 12:45 AM	#22
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Tire carrier wanted So the other bracket is on the fender itself am i correct

01-30-2021, 12:59 PM	#24
907burb Active Member Join Date: Nov 2017 Location: Palmer, Alaska Posts: 196	Re: Tire carrier wanted Price on the brackets is 75.00 dollars. Shipping to your zip is 66.50 through USPS, which is the cheapest way to ship from AK. The bracket is welded together so the box is large to accommodate the bracket. Total to your door is 141.50. To MACS61, yes the small bracket goes on the top of the fender. It secures the fender to the top of the bed.

Register or Log In To remove these advertisements.