Up date time!!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mrsmothers · 07-15-2011, 12:48 AM

Well I have been killing rust thease days. I have most of it cut out in the pictures I was in the mock up stage so thats why pop rivits are holding things together.

mrsmothers · 07-15-2011, 12:50 AM

The new color for now I didnt want to be rideing around in primer so I decided to just give it a quick paint my self. Here is the new temp color.

**FRENCHBLUE72** · 07-15-2011, 08:43 AM

Looks like you have made some really good progress keep up the good work..

bosco200 · 07-15-2011, 04:17 PM

Lookin reaaal good!!!!!

VA72C10 · 07-15-2011, 05:37 PM

Nice work! A major improvement already!!!

Indyuke · 07-15-2011, 05:40 PM

**Sheds tears for another setup of ram horns tossed out in favor of headers.

mrsmothers · 07-19-2011, 01:49 AM

haha I was going to use the ram horns but they broke.

dukcaln · 07-19-2011, 12:27 PM

nice work..... good to see it can be done on a budget.... what a difference some elbo grease and tlc make on these old trucks

mrsmothers · 08-03-2011, 10:04 PM

I have found that once I put it together it comes right back a part its like I cant leave it alone.

mrsmothers · 08-11-2011, 08:02 PM

Well its back together the wireing is still dead and the back tire blew out but thats ok. Its getting new ones this week and hopefully new wireing the week after. Then bed liner yay!!!!

O can you spot the three other chevy truck in the picture heres a hint ones yellow and ones blue.

mrsmothers · 11-13-2011, 06:35 PM

Well I figured I would give a small up date I put a bed liner in it a new tire here a new tire there. The int is almost done it got new carpet and a few other odds and ends. All new cab rubber new antenna a raido in the glove box.

VA72C10 · 11-13-2011, 06:38 PM

Looks good!!!

eightbanger · 11-13-2011, 08:01 PM

Quote:

Originally Posted by bmfm64

Nothin like doing upholstery in the kitchen! Looks great!

Yeah, and in your bare feet..

Nice job mate.

oldblue1968chevy · 11-13-2011, 10:58 PM

eww feet yuch lol

looks good man

mrsmothers · 12-26-2011, 08:39 PM

Well it took me all day but I restored my gauges they where busted only on of the lights worked and rust had taken over the faces. I also put in a new vent and the kick plates to finish off the new carpet.

Indyuke · 12-26-2011, 08:53 PM

Goodness! You're really giving that truck a serious makeover. It's looking really good!

1972RedNeck · 12-26-2011, 09:58 PM

Quote:

Originally Posted by bmfm64

Nothin like doing upholstery in the kitchen! Looks great!

It's hard work and the refrigerator needs to be close at all times.

**70cst** · 12-27-2011, 12:58 AM

mrsmothers on a very

transformation.

oldblue1968chevy · 12-27-2011, 01:12 AM

wow good job looks way better!!!

You should've put some orange paint on the 'HIGH' end of the temp guage

Truck looks good man you should be proud.

RCbowtie69 · 12-30-2011, 12:37 PM

Looking good,you have came along way on your truck.Keep up the hard work & pictures of your progress coming & keep on truckin'

mrsmothers · 01-28-2012, 10:59 PM

small up date new outter grill shell and new bumper and yes I know she is dirty lol

07-15-2011, 12:48 AM	#26
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! Well I have been killing rust thease days. I have most of it cut out in the pictures I was in the mock up stage so thats why pop rivits are holding things together. Attached Images

07-15-2011, 12:50 AM	#27
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! The new color for now I didnt want to be rideing around in primer so I decided to just give it a quick paint my self. Here is the new temp color. Attached Images

07-15-2011, 08:43 AM	#28
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Up date time!!!!! Looks like you have made some really good progress keep up the good work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2011, 04:17 PM	#29
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: Up date time!!!!! Lookin reaaal good!!!!!

07-15-2011, 05:37 PM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Up date time!!!!! Nice work! A major improvement already!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-15-2011, 05:40 PM	#31
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: Up date time!!!!! **Sheds tears for another setup of ram horns tossed out in favor of headers.

07-19-2011, 01:49 AM	#32
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! haha I was going to use the ram horns but they broke.

07-19-2011, 12:27 PM	#33
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Up date time!!!!! nice work..... good to see it can be done on a budget.... what a difference some elbo grease and tlc make on these old trucks __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

08-03-2011, 10:04 PM	#34
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! I have found that once I put it together it comes right back a part its like I cant leave it alone. Attached Images

08-11-2011, 08:02 PM	#35
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! Well its back together the wireing is still dead and the back tire blew out but thats ok. Its getting new ones this week and hopefully new wireing the week after. Then bed liner yay!!!! O can you spot the three other chevy truck in the picture heres a hint ones yellow and ones blue. Attached Images

11-13-2011, 06:35 PM	#36
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! Well I figured I would give a small up date I put a bed liner in it a new tire here a new tire there. The int is almost done it got new carpet and a few other odds and ends. All new cab rubber new antenna a raido in the glove box. Attached Images

11-13-2011, 06:38 PM	#37
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Up date time!!!!! Looks good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-13-2011, 10:58 PM	#39
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Up date time!!!!! eww feet yuch lol looks good man __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-26-2011, 08:39 PM	#40
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! Well it took me all day but I restored my gauges they where busted only on of the lights worked and rust had taken over the faces. I also put in a new vent and the kick plates to finish off the new carpet. Attached Images

12-26-2011, 08:53 PM	#41
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: Up date time!!!!! Goodness! You're really giving that truck a serious makeover. It's looking really good!



Register or Log In To remove these advertisements.

12-27-2011, 12:58 AM	#43
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	Re: Up date time!!!!! mrsmothers on a very transformation. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-27-2011, 01:12 AM	#44
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Up date time!!!!! wow good job looks way better!!! You should've put some orange paint on the 'HIGH' end of the temp guage Truck looks good man you should be proud. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-30-2011, 12:37 PM	#45
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Up date time!!!!! Looking good,you have came along way on your truck.Keep up the hard work & pictures of your progress coming & keep on truckin' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

01-28-2012, 10:59 PM	#46
mrsmothers Registered User Join Date: Oct 2010 Location: ruston la Posts: 169	Re: Up date time!!!!! small up date new outter grill shell and new bumper and yes I know she is dirty lol Attached Images

Register or Log In To remove these advertisements.