my truck! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**passthebuck** · 01-12-2003, 12:14 AM

WELL, as you all might have remembered, I bought my '67 GMC from my uncle back in september. It's still in his machine shed because I'm in university & short on $. I promised pics & here they are. Sorry for the quality but I'm not too good with the digicam yet. Please tell me what ya think.... It was a farm truck that hauled water for most of its life.

**passthebuck** · 01-12-2003, 12:15 AM

another

**passthebuck** · 01-12-2003, 12:16 AM

& another

**passthebuck** · 01-12-2003, 12:17 AM

more

**passthebuck** · 01-12-2003, 12:17 AM

& more

**passthebuck** · 01-12-2003, 12:23 AM

last one

neonlarry · 01-12-2003, 12:38 AM

Looks pretty good. Other than the rust it seems to be in good shap, and it should make a nice truck.

**passthebuck** · 01-12-2003, 01:16 AM

Thanks larry,
Does anyone have any suggestions as to how ez it is to fix my cab rust? I know thats a super common question... I am planning to pull off the cab, set it on a block of foam on rollers & weld it up. I've got lots of plans for the truck BUT first I gotta get it street legal. The corners, the inner & outer rockers, and the floors are all rotten. Any Winnipegers out there?

neonlarry · 01-12-2003, 01:21 AM

It's too bad you couldn't come to CA and get a new cab. lol I don't know too much about body work, but as long as it is only the floor rockers and cab corners that are bad, you should be able to fix it. When the rust starts to get into the rest of the cab, then it's time to find a new one.

Longhorn Man · 01-12-2003, 01:53 AM

Pretty cool truck. How does it run?
Is that the textured glove box door? I know there's a few ppl looking for them.

**passthebuck** · 01-12-2003, 01:59 AM

It runns really well-the rear main seal leaks a tiny bit & thus makes the clutch chatter a bit but otherwise it's smooth runner. yup, its a textured box lid - whats special about it? I looked inside for the build sticker & there's none.

*Slams_58* · 01-12-2003, 11:10 AM

Not a Winnipegger , but a couple Flin Flonners here!!! My husband is replacing his cab corners and rockers on his 72, so maybe he will have some insight on how to repair the rust after he gets his done up. Looks like it will be a nice truck. Welcome to the Board

toms68cst · 01-12-2003, 11:17 AM

Farm trucks rule!

What's with the rubber bungy cord thing on the air cleaner???? It looks like a classic farmer fix!

*Gee_Emm* · 01-12-2003, 11:24 AM

Me me me

What plans do you have for the truck?

I am doing some floor replacement work now too.

**passthebuck** · 01-12-2003, 03:55 PM

the bungie cord holds that little "velocity stack" onto the carb sez my uncle & yea, it is a classic farmer fix - look whats holding in the battery!

Hi to all who live near by! & I look forward to hearing how your tinwork goes - tips to make it ez & do it right will be much appreciated. I'm building a steel cranked 350 (68 327 block), polished & shotpeened rods, KB hyperutectics (sp?), a roller cam & trickflow twisted wedge heads. Some headders & an rpm intake outa top it off. I'm aiming for 400-430 crankshaft hp. as for body-i'm lookin to make a really nice summer hauler. I'll replace all metal that needs it, rust proof the s##t out of it, slap some orange paint on it & mabe some sweet wheels. I'm more of a motor guy so i can see that more clearly in my head BUT other mods i think will just happen as they come along... I'm open to suggestions bigtime! I think i wanna resto the truck but make it better in most areas... suggestions? I wanna put tow hooks on it, a heavyduty step bumper, & i dunno what else...

Reumster · 01-12-2003, 03:59 PM

Good luck. Keep us posted on the resto.

JHickson6 · 01-12-2003, 04:34 PM

Hey Hey Another Winnipegger!!!! Hey I know all about the shortage of money caused by university, i'm in my first year at U of M and I hate it!! Welcome to the boards, they're addictive!

ChevLoRay · 01-12-2003, 04:51 PM

I guess that bungee cords are just high-tech substitutes for baling wire....easy fit and adjustable.

Welcome to the board. Make sure you spend your time studying and not getting your daily/hourly fix from the board. It is habit-forming, for sure.

Your rust seems about average, considering your weather and the effects of road salt, etc. Down here in Arkansas, we don't have salt, but we do have mud. Mud causes rust, too....if it is allowed to accumulate.

You, like a lot of us, have your work cut out for you. After all, it's only money, eh?

67cst · 01-12-2003, 05:14 PM

i have a textured glove box door in my 67, are these rare? i wanna switch to a smooth one...or should i keep mine?

Dean23 · 01-12-2003, 05:53 PM

looks alright, the cab corners look the same as my 68. HAte the wau trucks rust out in tne great white north

*Gee_Emm* · 01-12-2003, 06:05 PM

Hows the truck coming Jared?

Raven Lunatic · 01-12-2003, 06:16 PM

Hey, that looks like a pretty good starter truck... Not in Winnipeg, but it's just about as cold here, and just as salty in the winter!

**passthebuck** · 04-18-2004, 09:31 PM

I got a bunch o' work done this weekend. Welding & grinding are the orders of the day. See attached pics & tell me what ya think.

**passthebuck** · 04-18-2004, 09:32 PM

another

**passthebuck** · 04-18-2004, 09:33 PM

#3

01-12-2003, 12:14 AM	#1
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	my truck! WELL, as you all might have remembered, I bought my '67 GMC from my uncle back in september. It's still in his machine shed because I'm in university & short on $. I promised pics & here they are. Sorry for the quality but I'm not too good with the digicam yet. Please tell me what ya think.... It was a farm truck that hauled water for most of its life. Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:15 AM	#2
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	another Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:17 AM	#4
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	more Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:17 AM	#5
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	& more Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:23 AM	#6
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	last one Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:16 AM	#3
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	& another Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 12:38 AM	#7
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Looks pretty good. Other than the rust it seems to be in good shap, and it should make a nice truck. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

01-12-2003, 01:16 AM	#8
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Thanks larry, Does anyone have any suggestions as to how ez it is to fix my cab rust? I know thats a super common question... I am planning to pull off the cab, set it on a block of foam on rollers & weld it up. I've got lots of plans for the truck BUT first I gotta get it street legal. The corners, the inner & outer rockers, and the floors are all rotten. Any Winnipegers out there? __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 01:21 AM	#9
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	It's too bad you couldn't come to CA and get a new cab. lol I don't know too much about body work, but as long as it is only the floor rockers and cab corners that are bad, you should be able to fix it. When the rust starts to get into the rest of the cab, then it's time to find a new one. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

01-12-2003, 01:53 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Pretty cool truck. How does it run? Is that the textured glove box door? I know there's a few ppl looking for them.

01-12-2003, 01:59 AM	#11
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	It runns really well-the rear main seal leaks a tiny bit & thus makes the clutch chatter a bit but otherwise it's smooth runner. yup, its a textured box lid - whats special about it? I looked inside for the build sticker & there's none. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-12-2003, 11:10 AM	#12
Slams_58 Account Suspended Join Date: May 2002 Location: I let ya know as soon as I know Posts: 3,593	Not a Winnipegger , but a couple Flin Flonners here!!! My husband is replacing his cab corners and rockers on his 72, so maybe he will have some insight on how to repair the rust after he gets his done up. Looks like it will be a nice truck. Welcome to the Board

01-12-2003, 11:17 AM	#13
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,278	Farm trucks rule! What's with the rubber bungy cord thing on the air cleaner???? It looks like a classic farmer fix! __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

01-12-2003, 11:24 AM	#14
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Me me me What plans do you have for the truck? I am doing some floor replacement work now too. Last edited by Gee_Emm; 01-12-2003 at 11:28 AM.

01-12-2003, 03:55 PM	#15
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	the bungie cord holds that little "velocity stack" onto the carb sez my uncle & yea, it is a classic farmer fix - look whats holding in the battery! Hi to all who live near by! & I look forward to hearing how your tinwork goes - tips to make it ez & do it right will be much appreciated. I'm building a steel cranked 350 (68 327 block), polished & shotpeened rods, KB hyperutectics (sp?), a roller cam & trickflow twisted wedge heads. Some headders & an rpm intake outa top it off. I'm aiming for 400-430 crankshaft hp. as for body-i'm lookin to make a really nice summer hauler. I'll replace all metal that needs it, rust proof the s##t out of it, slap some orange paint on it & mabe some sweet wheels. I'm more of a motor guy so i can see that more clearly in my head BUT other mods i think will just happen as they come along... I'm open to suggestions bigtime! I think i wanna resto the truck but make it better in most areas... suggestions? I wanna put tow hooks on it, a heavyduty step bumper, & i dunno what else... __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car



Register or Log In To remove these advertisements.

01-12-2003, 03:59 PM	#16
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Good luck. Keep us posted on the resto. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

01-12-2003, 04:34 PM	#17
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Hey Hey Another Winnipegger!!!! Hey I know all about the shortage of money caused by university, i'm in my first year at U of M and I hate it!! Welcome to the boards, they're addictive! __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

01-12-2003, 04:51 PM	#18
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	I guess that bungee cords are just high-tech substitutes for baling wire....easy fit and adjustable. Welcome to the board. Make sure you spend your time studying and not getting your daily/hourly fix from the board. It is habit-forming, for sure. Your rust seems about average, considering your weather and the effects of road salt, etc. Down here in Arkansas, we don't have salt, but we do have mud. Mud causes rust, too....if it is allowed to accumulate. You, like a lot of us, have your work cut out for you. After all, it's only money, eh? __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-12-2003, 05:14 PM	#19
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	i have a textured glove box door in my 67, are these rare? i wanna switch to a smooth one...or should i keep mine? __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

01-12-2003, 05:53 PM	#20
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	looks alright, the cab corners look the same as my 68. HAte the wau trucks rust out in tne great white north __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

01-12-2003, 06:05 PM	#21
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Hows the truck coming Jared?

01-12-2003, 06:16 PM	#22
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Hey, that looks like a pretty good starter truck... Not in Winnipeg, but it's just about as cold here, and just as salty in the winter!

04-18-2004, 09:31 PM	#23
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	UPDATE! I got a bunch o' work done this weekend. Welding & grinding are the orders of the day. See attached pics & tell me what ya think. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

04-18-2004, 09:32 PM	#24
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	another __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

04-18-2004, 09:33 PM	#25
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	#3 __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

Register or Log In To remove these advertisements.