What did you get done? 3/18/07 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dan42 · 03-18-2007, 11:10 PM

I got my seat in - well, almost - it's out of a '91 regular cab - I cut 1.5" out of the middle and it's just the right height. Still gotta bolt it in - none of the holes line up, so I'm making the bottom of my cab a little swiss-cheesy, but I'll weld 'em up when I change out the carpet someday.

Captain Knievel · 03-18-2007, 11:35 PM

Hey mods: Any chance we can ban posts from folks in California during the months November-April?

1969k10stepside · 03-18-2007, 11:37 PM

Quote:

Originally Posted by Captain Knievel

Hey mods: Any chance we can ban posts from folks in California during the months November-April?

As much as I agree with you

We cant do that

**CMars45000** · 03-19-2007, 12:10 AM

My truck has finally melted out of the snow enough to work on. I pulled the gas tank out of the cab, eradicated the remaining rodents, started pulling up fibergalss patch work from the floorboard and I finished seting up the gears in my 12-bolt and installing the new billet pinion yoke. I just need to sent the pinion preload and she is done.

MACO · 03-19-2007, 01:17 AM

Replaced the rear brakes on my 71 C20.

texanidiot25 · 03-19-2007, 03:48 AM

Quote:

Originally Posted by 1LoC10

This was actually during the week.. but I changed this

to this

OOOO PURTY. What valve covers are those?

Got started on some custom door panels

Theyll be trimmed, shapped, then covered in tweed probly. What ever shade for cream the seats come in will dictate the panels color. Custom armrests, kinda like the Copperhead ones that stretched over part of the door handle. Probly do some tuck and roll across it too.

And my truck was broken into... But its kinda hard to steal a truck that has no engine, trans, or steering wheel... go see my ranting thread about that one.

GREASEMONKEY72 · 03-19-2007, 06:02 AM

got a haircut friday night, then pitted for an imca modified saturday night at the local dirt track and hung out with friends

bobthecop · 03-19-2007, 08:50 AM

Got my '72 3/4 ton chassis in the garage and started taking it apart and cleaning it up, lots 'o rust, but not too deep. I did find out I really need a bigger compressor, the 20 gal craftsman has a hard time keeeping up with a air tools for cleaning up the frame.

rophle1 · 03-19-2007, 09:05 AM

Didn't do anything to the '68, waiting for my radiator to arrive, but I did change the oil and rotate the tires on my F&$d ranger.

Chevyholic · 03-19-2007, 09:11 AM

Got my new headers and valve covers on. Still need to get it to the muffler shop for the remaining exhaust. Almost drivable, I can't wait!

1lowdiesel · 03-19-2007, 09:43 AM

welp got my donor motor out and started putting the go fast parts on it, picked up a 700r4 for $100 bucks and dropped the motor off the stand all in the same day.

yup you heard me the sdtand broke and landed on my new lifters. bent a stud but thats it.
and made a new coat hook

faribran · 03-19-2007, 09:46 AM

put some lowering coils on the rear of the 67... looks much better... now i need to lower the front..

harvested a 22lb turkey

1LoC10 · 03-19-2007, 11:26 AM

Quote:

Originally Posted by texanidiot25

OOOO PURTY. What valve covers are those?

I don't know what they are.. they have no markings on them... got em at a swap meet, all I know is they are aluminum and orange

paaw · 03-19-2007, 03:44 PM

got the wife a new toy, and picked one up for me too. you can guess which on is mine

bobthecop · 03-19-2007, 04:02 PM

Quote:

Originally Posted by paaw

got the wife a new toy, and picked one up for me too. you can guess which on is mine

So how do you like driving a Pontiac???

paaw · 03-19-2007, 04:04 PM

its great in the turns and can hold a child seat

blazntn · 03-19-2007, 04:56 PM

Well I picked up all new metal for the cab, new doors, and new front 67 fenders!! and took them straight to the body shop!!

skokie · 03-19-2007, 05:00 PM

Got my new brake lines installed.

texanidiot25 · 03-19-2007, 11:22 PM

The grandprixs are a bit sportier, but I love them old Pontiac Sedans. Good on their feet for their size. Is it the GTP/GXP or what ever the top performance one was?

Shiney and ornage valve covers, their perfect for my orange truck.

manimal · 03-19-2007, 11:49 PM

Finished the 12' trailer frame for my BBQ. Next weekend will work on the smoker and firebox.
-Lance

03-18-2007, 11:10 PM	#26
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: What did you get done? 3/18/07 I got my seat in - well, almost - it's out of a '91 regular cab - I cut 1.5" out of the middle and it's just the right height. Still gotta bolt it in - none of the holes line up, so I'm making the bottom of my cab a little swiss-cheesy, but I'll weld 'em up when I change out the carpet someday. Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-18-2007, 11:35 PM	#27
Captain Knievel Senior Member Join Date: Feb 2007 Location: Seattle, WA Posts: 458	Re: What did you get done? 3/18/07 Hey mods: Any chance we can ban posts from folks in California during the months November-April? __________________ 1970 C10

03-19-2007, 12:10 AM	#29
CMars45000 Registered User Join Date: Jul 2006 Location: Pittsburgh, PA Posts: 204	Re: What did you get done? 3/18/07 My truck has finally melted out of the snow enough to work on. I pulled the gas tank out of the cab, eradicated the remaining rodents, started pulling up fibergalss patch work from the floorboard and I finished seting up the gears in my 12-bolt and installing the new billet pinion yoke. I just need to sent the pinion preload and she is done. __________________ Project Family Values Build Thread Vehicles/Projects: -1971 C10 SWB Fleetside! Gathering parts now, will begin frame-off resto soon... Pleasure in the job puts perfection in the work. -Aristotle

03-19-2007, 01:17 AM	#30
MACO Registered User Join Date: Sep 2005 Location: British Columbia CANADA Posts: 118	Re: What did you get done? 3/18/07 Replaced the rear brakes on my 71 C20. __________________ 1969 C20 Customer Camper CST, 396, TH400, Factory A/C, Olive Green.

03-19-2007, 06:02 AM	#32
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: What did you get done? 3/18/07 got a haircut friday night, then pitted for an imca modified saturday night at the local dirt track and hung out with friends __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

03-19-2007, 08:50 AM	#33
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: What did you get done? 3/18/07 Got my '72 3/4 ton chassis in the garage and started taking it apart and cleaning it up, lots 'o rust, but not too deep. I did find out I really need a bigger compressor, the 20 gal craftsman has a hard time keeeping up with a air tools for cleaning up the frame. __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car) Last edited by bobthecop; 03-19-2007 at 08:52 AM.

03-19-2007, 09:05 AM	#34
rophle1 Registered User Join Date: Jan 2007 Location: Athens, GA Posts: 112	Re: What did you get done? 3/18/07 Didn't do anything to the '68, waiting for my radiator to arrive, but I did change the oil and rotate the tires on my F&$d ranger. __________________ 1968 C10 Stepside 396 bored .030 TH400

03-19-2007, 09:11 AM	#35
Chevyholic Will it run today? Join Date: Feb 2007 Location: DFW, Texas Posts: 272	Re: What did you get done? 3/18/07 Got my new headers and valve covers on. Still need to get it to the muffler shop for the remaining exhaust. Almost drivable, I can't wait! __________________ Jaws, the 1971 Chevy Cheyenne Longbed. She's big, grey, and has an insatiable appetite!

03-19-2007, 09:43 AM	#36
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: What did you get done? 3/18/07 welp got my donor motor out and started putting the go fast parts on it, picked up a 700r4 for $100 bucks and dropped the motor off the stand all in the same day. yup you heard me the sdtand broke and landed on my new lifters. bent a stud but thats it. and made a new coat hook __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-19-2007, 09:46 AM	#37
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: What did you get done? 3/18/07 put some lowering coils on the rear of the 67... looks much better... now i need to lower the front.. harvested a 22lb turkey __________________ "

03-19-2007, 03:44 PM	#39
paaw Registered User Join Date: Feb 2006 Location: nashville Posts: 217	Re: What did you get done? 3/18/07 got the wife a new toy, and picked one up for me too. you can guess which on is mine Attached Images __________________ 1997 pontiac grand prix gt (daily driver) for now; 2004 dodge ram quad cab (wife's truck) 4.7; 2000 pontiac booneville (wife daily driver) 1972 chevy cheyenne 350 bored 40 over 700r trans 373 gears ( posi) soon to be daily driver; 2002 gsxr750 sold

03-19-2007, 04:04 PM	#41
paaw Registered User Join Date: Feb 2006 Location: nashville Posts: 217	Re: What did you get done? 3/18/07 its great in the turns and can hold a child seat __________________ 1997 pontiac grand prix gt (daily driver) for now; 2004 dodge ram quad cab (wife's truck) 4.7; 2000 pontiac booneville (wife daily driver) 1972 chevy cheyenne 350 bored 40 over 700r trans 373 gears ( posi) soon to be daily driver; 2002 gsxr750 sold

03-19-2007, 04:56 PM	#42
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: What did you get done? 3/18/07 Well I picked up all new metal for the cab, new doors, and new front 67 fenders!! and took them straight to the body shop!!

03-19-2007, 05:00 PM	#43
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Re: What did you get done? 3/18/07 Got my new brake lines installed. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-19-2007, 11:22 PM	#44
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: What did you get done? 3/18/07 The grandprixs are a bit sportier, but I love them old Pontiac Sedans. Good on their feet for their size. Is it the GTP/GXP or what ever the top performance one was? Shiney and ornage valve covers, their perfect for my orange truck.



Register or Log In To remove these advertisements.

03-19-2007, 11:49 PM	#45
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? 3/18/07 Finished the 12' trailer frame for my BBQ. Next weekend will work on the smoker and firebox. -Lance

Register or Log In To remove these advertisements.