And so it begins................ - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*highperf4x4* · 03-09-2010, 02:24 AM

If it busted it will probably be on the outside of the block. Look it over with a light while you're down there.

GMC406 · 03-09-2010, 02:29 AM

Ya, planned to look it over good. Should be nice and easy as it is all bran new fresh painted.

JohnC · 03-09-2010, 11:00 AM

You may have already checked it, but what about the u-joints in the driveshaft. Think maybe one of them is clanking on you?

*highperf4x4* · 03-09-2010, 12:29 PM

Scott thought they seemed to be ok. Same with the carrier bearing.

JohnC · 03-09-2010, 03:07 PM

Hmmmm

I guess the rearend would be the next logical place to start then.

scotts62 · 03-09-2010, 11:22 PM

Guess i should have hopped in and put it in gear to see what it was doing but i figured we fixed it with the bolts.

*highperf4x4* · 03-09-2010, 11:40 PM

It was hard to tell on the street with the rain and I won't be able to fire it up till I put the dash back in unless I cap the oil pressure line with something but when I get the wiper stuff fixed I'll check it out some more. I might swing up your way agian sincce you're the expert!

scotts62 · 03-10-2010, 08:55 AM

Quote:

Originally Posted by highperf4x4

I might swing up your way agian sincce you're the expert!

i wouldnt go that far...

Sure bring it up and we'll put it on the lift again.

*highperf4x4* · 03-10-2010, 11:41 AM

Right on!

I hope I don't have to change the gears....................

JohnC · 03-10-2010, 05:43 PM

We may have to drive it around with someone in the bed, and maybe another set of ears in the cab. I call the cab!

scotts62 · 03-10-2010, 10:14 PM

Quote:

Originally Posted by highperf4x4

Right on!

I hope I don't have to change the gears....................

Yeah but then we may have a used set that you may like better

Quote:

Originally Posted by JohnC

We may have to drive it around with someone in the bed, and maybe another set of ears in the cab. I call the cab!

speaking of that i rode on the back frame of a big truck around the parking lot looking at the through shaft going through the front rear end to the rear rear to see if it was bent

and it was.

*highperf4x4* · 03-10-2010, 11:24 PM

Quote:

Originally Posted by JohnC

We may have to drive it around with someone in the bed, and maybe another set of ears in the cab. I call the cab!

Sounds like Scott wants the run job!!

Quote:

Originally Posted by scotts62

Yeah but then we may have a used set that you may like better

Cool, will they come with a free red auburn locker?

scotts62 · 03-11-2010, 08:27 AM

Quote:

Originally Posted by highperf4x4

Sounds like Scott wants the run job!!

Sure why not

thats funny

*highperf4x4* · 03-11-2010, 11:03 AM

my67chevytruck · 03-11-2010, 11:10 AM

Travis, here you go tearing up more stuff!

JohnC · 03-11-2010, 01:39 PM

Quote:

Originally Posted by scotts62

Sure why not

Oh man I can only imagine how far Travis would try and through you out of the back of the truck.

*highperf4x4* · 03-11-2010, 09:48 PM

Quote:

Originally Posted by my67chevytruck

Travis, here you go tearing up more stuff!

I never know what needs to be replaced if I don't stress test it brother!

Quote:

Originally Posted by JohnC

Oh man I can only imagine how far Travis would try and through you out of the back of the truck.

Actually I was planning on letting Scott run behind the truck and listen!!

JohnC · 03-12-2010, 10:16 AM

Quote:

Originally Posted by highperf4x4

I never know what needs to be replaced if I don't stress test it brother!

Actually I was planning on letting Scott run behind the truck and listen!!

scotts62 · 03-12-2010, 10:44 AM

Quote:

Originally Posted by highperf4x4

Actually I was planning on letting Scott run behind the truck and listen!!

Now i dont mind riding under the truck on a creeper but the running part i dont like....

*highperf4x4* · 03-12-2010, 11:44 AM

do you want to ride on my creeper or do you have a special unit for these types of projects?

D-Rat · 03-12-2010, 12:31 PM

Quote:

Originally Posted by JohnC

The purple ones gave it an eerie look in the pic alright.

I do think the green would work well with the color of the truck though.

Attachment 550501

Well, I've been reading through this thread with great interest, but when I got to this post, I just busted up laughing.

The guy on the scooter there is a friend of mine...He's a Canadian....used to live here in AZ, but lives in Gainesville, FL now, and he's a dyed in the wool chevy guy himself. He got this ridiculous scooter and had a hilarous pic taken of him on it....then another guy we know from the Nissan boards submitted it to Fark and he became a Fark.com cliche from one of their photoshop threads.

Hilarious.

JohnC · 03-12-2010, 01:37 PM

Quote:

Originally Posted by D-Rat

Well, I've been reading through this thread with great interest, but when I got to this post, I just busted up laughing.

The guy on the scooter there is a friend of mine...He's a Canadian....used to live here in AZ, but lives in Gainesville, FL now, and he's a dyed in the wool chevy guy himself. He got this ridiculous scooter and had a hilarous pic taken of him on it....then another guy we know from the Nissan boards submitted it to Fark and he became a Fark.com cliche from one of their photoshop threads.

Hilarious.

What a small world.

*TheSebring* · 03-12-2010, 08:25 PM

Quote:

Originally Posted by highperf4x4

do you want to ride on my creeper or do you have a special unit for these types of projects?

Special unit...

YouTube- Motorized mechanics creeper 80cc motor

*highperf4x4* · 03-12-2010, 09:20 PM

Quote:

Originally Posted by D-Rat

Well, I've been reading through this thread with great interest, but when I got to this post, I just busted up laughing.

The guy on the scooter there is a friend of mine...He's a Canadian....used to live here in AZ, but lives in Gainesville, FL now, and he's a dyed in the wool chevy guy himself. He got this ridiculous scooter and had a hilarous pic taken of him on it....then another guy we know from the Nissan boards submitted it to Fark and he became a Fark.com cliche from one of their photoshop threads.

Hilarious.

that is funny.

JohnC · 03-12-2010, 11:12 PM

Quote:

Originally Posted by TheSebring

Special unit...
YouTube- Motorized mechanics creeper 80cc motor

That's Awesome. I want to see the first and second versions though.

03-09-2010, 02:24 AM	#576
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ If it busted it will probably be on the outside of the block. Look it over with a light while you're down there.

03-09-2010, 02:29 AM	#577
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: And so it begins................ Ya, planned to look it over good. Should be nice and easy as it is all bran new fresh painted. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-09-2010, 11:00 AM	#578
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ You may have already checked it, but what about the u-joints in the driveshaft. Think maybe one of them is clanking on you?

03-09-2010, 12:29 PM	#579
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Scott thought they seemed to be ok. Same with the carrier bearing.

03-09-2010, 03:07 PM	#580
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ Hmmmm I guess the rearend would be the next logical place to start then.

03-09-2010, 11:22 PM	#581
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Guess i should have hopped in and put it in gear to see what it was doing but i figured we fixed it with the bolts. __________________ Scott 93 crew cab build Project 62

03-09-2010, 11:40 PM	#582
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ It was hard to tell on the street with the rain and I won't be able to fire it up till I put the dash back in unless I cap the oil pressure line with something but when I get the wiper stuff fixed I'll check it out some more. I might swing up your way agian sincce you're the expert!

03-10-2010, 11:41 AM	#584
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Right on! I hope I don't have to change the gears....................

03-10-2010, 05:43 PM	#585
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ We may have to drive it around with someone in the bed, and maybe another set of ears in the cab. I call the cab!

03-11-2010, 11:03 AM	#589
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................

03-11-2010, 11:10 AM	#590
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: And so it begins................ Travis, here you go tearing up more stuff! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-12-2010, 11:44 AM	#595
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ do you want to ride on my creeper or do you have a special unit for these types of projects?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.