The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-25-2012, 02:43 PM   #101
fakerwade
Senior Member
 
fakerwade's Avatar
 
Join Date: Oct 2011
Location: Lewiston, ID.
Posts: 627
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
So, he's pissed that I put them pictures up of his welds. I'd have to say that the only gripe is the little glob on the lower right, but that's where he was adjusting the wire speed when he just got started. I think it's stellar! Just so you all know, he smoothed that little booger off! There, happy dude!?
Thanks again! MAYBE I'll let you drive it!
It's not how pretty you weld,,,it's how pretty you grind!!

Your build is looking great! Maybe next time I'm up there I can stop in and take a look??
__________________
Wade
,
JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!!
,
Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570

Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro
fakerwade is offline   Reply With Quote
Old 06-25-2012, 05:53 PM   #102
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

That's funny because when he was a little sh*t he'd be in the shop with me like a shadow UNTIL he saw the grinder come out. He was terrified of that thing and would just BOLT into the house until it went quiet again. I still teas him about that - vrooooom!! vroooom!!

I'd love to show and chat about this stuff. Lemme know!
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-04-2012, 10:30 AM   #103
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Have I mentioned that I hate body work? I'm calling the cab done! Doors, fenders, hood, grille and cowl all need sanded, but very little body work.
I have finally ordered springs (2" and 5"). I also ordered all four ball joints, cab and core support mounts and that cool panhard rod kit from No Limit. I'm also going to get his rear shock re-locate kit.
Posted via Mobile Device
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-06-2012, 06:10 PM   #104
fakerwade
Senior Member
 
fakerwade's Avatar
 
Join Date: Oct 2011
Location: Lewiston, ID.
Posts: 627
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
I have finally ordered springs (2" and 5"). I also ordered all four ball joints, cab and core support mounts and that cool panhard rod kit from No Limit. I'm also going to get his rear shock re-locate kit.
Posted via Mobile Device
Sounds like work!! Can't wait to see!!
__________________
Wade
,
JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!!
,
Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570

Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro
fakerwade is offline   Reply With Quote
Old 07-07-2012, 12:13 PM   #105
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Same here! Wifey decided it was time to GUT the main bathroom in the house, so the shop is once again a cabinet shop! I orderd up the No Limit rear shock relocate kit today and hope to have all those parts here soon! Maybe I'll have the tile done by then - sheesh! Kidding of course!
Attached Images
  
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-08-2012, 12:55 AM   #106
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Springs came today! Got the tub in.
Posted via Mobile Device
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-10-2012, 01:15 PM   #107
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

More stuff arrived and the boy isn't waiting for me to finish the bathroom! The No Limit stuff is made well. I wasn't super excited about the hardware with grade 2 nuts and washers to go with the grade 8 screws, but no big deal. The chassis mount is not fitting real well but we'll make the tweaks we need to get it right. Think its possible that the LWB is a little different in that area than the SWB? I know the frame is not tweaked but when you bolt the two brackets together and bolt that assembly through the OG rivet holes, the vertical bracket on the side is not square with the frame rail. There should also be a spacer between the cross member and the 90 degree bracket. Overall, I'm impressed and happy with the product though!
Attached Images
    
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-11-2012, 01:21 AM   #108
68 TT
Still plays with trucks
 
68 TT's Avatar
 
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
Same here! Wifey decided it was time to GUT the main bathroom in the house, so the shop is once again a cabinet shop! I orderd up the No Limit rear shock relocate kit today and hope to have all those parts here soon! Maybe I'll have the tile done by then - sheesh! Kidding of course!
Great project. I wish my "helpers" were big enough to contribute like your son. Mine are too young to do much of anything right now.

I have the same problem with the wife adding more home projects to the list and taking away my truck time.

You are somewhere up the street from me as I am in Mead as well. Send me a PM if you need any help here and there. Did you see that fire this afternoon?
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
68 TT is offline   Reply With Quote
Old 07-11-2012, 01:33 AM   #109
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Just read that on the news. Poor old gal is in critical condition. I guess the neighbors could hear her screaming but couldn't get to her. Sad deal.
I'm just out on the State Park Drive. We should hook up sometime! The boy and I would love to eyball that Camaro of yours as well as the pickup. We could use a few pointers on our big block in the big truck as well!
Posted via Mobile Device
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-12-2012, 02:24 AM   #110
68 TT
Still plays with trucks
 
68 TT's Avatar
 
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
...I'm just out on the State Park Drive. We should hook up sometime! The boy and I would love to eyball that Camaro of yours as well as the pickup. We could use a few pointers on our big block in the big truck as well!
Sounds good. PM me and we can figure out a time that works for us all.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
68 TT is offline   Reply With Quote
Old 07-18-2012, 01:56 AM   #111
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Made some progress. Well, the boy has. I got the sheetrock taped, drawers made and am starting on the fronts. Bla, bla, bla. Sounds like I'm crying, but that bathroom really was NASTY and needed done. Gotta keep Wifey happy too!
I never did get any response from Rob on the No Limit stuff. I posted, PM'd and emailed, but didn't call. I'm sure if I had gotten on the phone they would have helped. We just mounted the side bracket like it should be and welded the cross memeber and lower bracket. I only used about half the fastners sent with the kits. The grade 8 screws are nice but the grade 2 stuff to go with is really bad. I wouldn't put a kid's swing set together with hardware like that. I inquired about the rear sway bar kit, but only heard that "it's in production". I asked when they thought it'd be available but never heard back. I'll buy one when they're ready. I am happy with the parts - enough on that.
Lower control arm cross shafts SUCK! We didn't think twice about tearing them apart so I could relocate the locating hole and clean them up. Actually, the boy tore them down and told me it was a PITA, but it wasn't until we went to reassemble them tonight that I realized what he was talking about. SCOTI posted some help for someone that helped me out too. Once I realized how they actually even work I understood what he was saying and what it takes to put them together right. Those things are tighter than the hubs H-E-double hockey sticks! I never did get the dust seals back in where they are supposed to go. How the heck are you supposed to do that? I also read some business about upgrading to 73-87 down there? What's that all about?
I'll put some pics up in the next day or two.
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776

Last edited by jlsanborn; 07-18-2012 at 01:58 AM. Reason: stoopid spelling
jlsanborn is offline   Reply With Quote
Old 07-18-2012, 01:59 AM   #112
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by 68 TT View Post
Sounds good. PM me and we can figure out a time that works for us all.
Still would like to do that! We've been busy here with no end in sight. We'll be truck-shopping for the boy here soon, so maybe we can work in a visit on one of those days?
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-18-2012, 05:46 AM   #113
68 TT
Still plays with trucks
 
68 TT's Avatar
 
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
Still would like to do that! We've been busy here with no end in sight. We'll be truck-shopping for the boy here soon, so maybe we can work in a visit on one of those days?
Sounds good to me.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
68 TT is offline   Reply With Quote
Old 07-18-2012, 05:54 AM   #114
68 TT
Still plays with trucks
 
68 TT's Avatar
 
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by jlsanborn View Post
...I also read some business about upgrading to 73-87 down there? What's that all about?
They use a conventional style rubber bushing in the A-arms instead of the older style threaded shaft type like our trucks have.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
68 TT is offline   Reply With Quote
Old 07-23-2012, 01:31 PM   #115
69gmcc10
Registered User
 
69gmcc10's Avatar
 
Join Date: May 2011
Location: Missoula, MT
Posts: 934
Re: My '67 Fleetside C10 renew

I am currently converting to coils from leafs on my 69 and spent about 1/2 the day getting my no limit pan hard frame mount to fit like the instruction said. I think that there needs to be some better instructions on this thing. The first thing I did was line the vertical mount over the hole like the instructions said, mark and drill the holes, and I wish I wouldn’t have done that. I had seen several others installed and none lined up, but that is what the instructions said so I did it. Tolerances on the bolt holes are real tight and I didn’t want to Swiss cheese my frame so I had to massage some holes and blot it in 1 bolt at a time using a motorcycle strap to progressively ratchet and align the holes. Don’t align it on the oval in the frame, blot it like you had it use a ratchet strap to pull the mount back as far as you can mark the holes and drill them, you will save yourself allot of frustration.

This system is awesome and I am excited to use it, but it fought me for hours.

Look at this page for good pics on the mount that rob actually installed on his shop truck and you can see the hole dosent line up on his either.

http://67-72chevytrucks.com/vboard/s...=436621&page=7
69gmcc10 is offline   Reply With Quote
Old 07-23-2012, 02:01 PM   #116
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Quote:
Originally Posted by 69gmcc10 View Post
I am currently converting to coils from leafs on my 69 and spent about 1/2 the day getting my no limit pan hard frame mount to fit like the instruction said. I think that there needs to be some better instructions on this thing. The first thing I did was line the vertical mount over the hole like the instructions said, mark and drill the holes, and I wish I wouldn’t have done that. I had seen several others installed and none lined up, but that is what the instructions said so I did it. Tolerances on the bolt holes are real tight and I didn’t want to Swiss cheese my frame so I had to massage some holes and blot it in 1 bolt at a time using a motorcycle strap to progressively ratchet and align the holes. Don’t align it on the oval in the frame, blot it like you had it use a ratchet strap to pull the mount back as far as you can mark the holes and drill them, you will save yourself allot of frustration.

This system is awesome and I am excited to use it, but it fought me for hours.

Look at this page for good pics on the mount that rob actually installed on his shop truck and you can see the hole dosent line up on his either.

http://67-72chevytrucks.com/vboard/s...=436621&page=7
Thanks for the feedback! My issue wasn't with the vertical piece but rather the angled part with the bar mounting holes. My frame is somehow a bit different that most. Rob sent me a "custom" lower bracket, but I had already modified the original one. My vertical bracket does line up with the slot. I'll get some pictures up here soon.
I also used the No Limit rear shock relocate kit and will be getting his rear swaybar when its available.
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-23-2012, 04:39 PM   #117
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: My '67 Fleetside C10 renew

Cool build! To heck with the truck, I want the bikes in the background!
Low Elco is offline   Reply With Quote
Old 07-23-2012, 06:25 PM   #118
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Thanks for the look! I just went through your build and wish I had that kind of mo-jo. I'm just past the year mark and have miles to go.

Them are some dusty bikes! I'd love to get out there more but always busy.
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-23-2012, 07:15 PM   #119
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: My '67 Fleetside C10 renew

To reiterate: I like the truck, Too!
Low Elco is offline   Reply With Quote
Old 07-23-2012, 07:21 PM   #120
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: My '67 Fleetside C10 renew

Also, note that that truck does NOT belong to me, but is scattered over three garages and my sizable shed. It is also displacing my GMC. I love it, but it WILL be finished and it IS going home. To that end, doing something to it every day. I'll be updating with big progress momentarily. You are lucky, your kid is handlin' bidness!
Low Elco is offline   Reply With Quote
Old 07-23-2012, 08:06 PM   #121
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: My '67 Fleetside C10 renew

Went back and read the whole thread, lots of thing seem oddly similar! Keep your good roll on, you're doing great!
Low Elco is offline   Reply With Quote
Old 07-23-2012, 09:57 PM   #122
FrankieD
Registered User
 
FrankieD's Avatar
 
Join Date: Jan 2011
Location: Gilberts IL.
Posts: 2,488
Re: My '67 Fleetside C10 renew

Wife and Life has a way of getting in the way of these trucks
__________________
94 k2500 EXCab Long Bed 350ci New Toy
95 K2500 Suburban New PlowTruck 454ci
Support our Troops @ http://anyairman.com
http://www.woundedwarriorproject.org/
FrankieD is offline   Reply With Quote
Old 07-24-2012, 12:43 AM   #123
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

So there has been progress! The bathroom is painted and we're finishing up staining the vanity!!! The Boy has the front end pretty much back together but we've got an issue with one of the ball joints. No biggie, just another delay. The biggest setback now is that we picked up a little pickup for him. It wasn't 24 hours and he had it in the shop tearing A-arms apart! He cut a wrap of the front coils and put it back together then talked the Wifey into taking him to the bone yard for some rear blocks. He threw 3 inchers in there. Looks sweet, but there goes my slave labor!!! Here's some before and after pics.

Again! promise to put up some C10 pics soon!
Attached Images
  
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Old 07-24-2012, 06:44 AM   #124
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: My '67 Fleetside C10 renew

Looks great! I'm kind of an s10 man at heart. Good to gee a motivated kid that doesn't need his hand held to git 'er done! No better feeling than getting a house thing done so you can do what you wanna do!
Posted via Mobile Device
Low Elco is offline   Reply With Quote
Old 07-30-2012, 11:07 AM   #125
jlsanborn
Registered User
 
jlsanborn's Avatar
 
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
Re: My '67 Fleetside C10 renew

Had to share this!

http://www.youtube.com/watch?feature...&v=4G3cPqThtos
__________________
'77 K30 3+3 - "The Crummy"
http://67-72chevytrucks.com/vboard/s...d.php?t=640134
'67 C10 L/SWB - Soon to be daily driver!
http://67-72chevytrucks.com/vboard/s...d.php?t=471776
jlsanborn is offline   Reply With Quote
Reply

Bookmarks

Tags
295/50-15, 327, butternut yellow, dog dish, muncie m20

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com