FINALLY bought a cooling transmission pan, but what temp. sender to get? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CEE1NG_RED · 06-29-2012, 12:49 AM

After months, I finally had some cash saved and purchased a DERALE transmission pan and a LOKAR anchor locking transmission dipstick. Now, my DERALE pan comes w/ a transmission temp. bung (1/8NPT). What trans. temp. sender do you recommend that will not crap out while in use in the long run. I found me some good priced senders, but will it do? Or paying more for an Autometer brand is best? Also, correct me if I'm wrong, but I should get a mechanical type sender rather than digital, right??

Here's what I found:

http://www.summitracing.com/parts/SUN-CP7576/

http://www.summitracing.com/parts/NVU-99005-40/

http://www.summitracing.com/parts/VDO-323095/

http://www.ebay.com/itm/DAKOTA-DIGIT...f630b4&vxp=mtr

http://www.jegs.com/webapp/wcs/store...erature+sender

LMK if you recommend another brand or just an Autozone/Oreilly part? Thanks!

CEE1NG_RED · 07-07-2012, 03:44 PM

59 views and no response?? What type of sender is recommended for this old truck? Electrical or mechanical?

Lee H · 07-07-2012, 03:52 PM

All those parts are good. I would get the VDO sender, and get a matching gauge. Analog or digital, what every your prefernce is.

06-29-2012, 12:49 AM	#1
CEE1NG_RED Registered User Join Date: Oct 2009 Location: LBC California Posts: 497	FINALLY bought a cooling transmission pan, but what temp. sender to get? After months, I finally had some cash saved and purchased a DERALE transmission pan and a LOKAR anchor locking transmission dipstick. Now, my DERALE pan comes w/ a transmission temp. bung (1/8NPT). What trans. temp. sender do you recommend that will not crap out while in use in the long run. I found me some good priced senders, but will it do? Or paying more for an Autometer brand is best? Also, correct me if I'm wrong, but I should get a mechanical type sender rather than digital, right?? Here's what I found: http://www.summitracing.com/parts/SUN-CP7576/ http://www.summitracing.com/parts/NVU-99005-40/ http://www.summitracing.com/parts/VDO-323095/ http://www.ebay.com/itm/DAKOTA-DIGIT...f630b4&vxp=mtr http://www.jegs.com/webapp/wcs/store...erature+sender LMK if you recommend another brand or just an Autozone/Oreilly part? Thanks! __________________ - 1967 Chevrolet C/10 SWB fleetside (New Project). - 1969 Chevrolet C/10 SWB fleetside (SOLD) - 2000 Ford Mustang 232 (DD) - 2003 Ford SVT Cobra "Terminator" 281 (Once in a blue moon driver/weekend driver)

07-07-2012, 03:44 PM	#2
CEE1NG_RED Registered User Join Date: Oct 2009 Location: LBC California Posts: 497	Re: FINALLY bought a cooling transmission pan, but what temp. sender to get? 59 views and no response?? What type of sender is recommended for this old truck? Electrical or mechanical? __________________ - 1967 Chevrolet C/10 SWB fleetside (New Project). - 1969 Chevrolet C/10 SWB fleetside (SOLD) - 2000 Ford Mustang 232 (DD) - 2003 Ford SVT Cobra "Terminator" 281 (Once in a blue moon driver/weekend driver)

07-07-2012, 03:52 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: FINALLY bought a cooling transmission pan, but what temp. sender to get? All those parts are good. I would get the VDO sender, and get a matching gauge. Analog or digital, what every your prefernce is. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703



Register or Log In To remove these advertisements.