My 52 GMC Build - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 04-05-2016, 02:59 PM

Quote:

Originally Posted by joedoh

wooot!

Futurama: Fry's Woo - YouTube

(although I take care of that before a turn a single wrench nowadays. once bitten, twice shy!)

LOL

Quote:

Originally Posted by Johnny_Lamebridge

Awesome! Now get out on the streets and do some illegal sh*t!

Yes sir. Well a local tire shop is sponsoring me for rear tires so you can count on it.

lower50's · 04-05-2016, 03:10 PM

Well some more great news today. I got conformation that due to me winning vehicle of the year last year at the Unfinished Nationals my truck will be on this years T-shirts

Also A friend of mine who has a pin-striping business (Petts Pinstriping) was asked to have a booth at the show. He asked me if I want to be a part of his booth.

He is working on my show plaque right now and may lay some lines this weekend on my truck.
I got the intake back on today.

lower50's · 04-05-2016, 05:08 PM

Rear fenders are on again.
http://vid51.photobucket.com/albums/...psdt4azoid.mp4

Coach529 · 04-05-2016, 05:18 PM

Quote:

Originally Posted by lower50's

Rear fenders are on again.
http://vid51.photobucket.com/albums/...psdt4azoid.mp4

Awesome!!

CRGRS 66 · 04-06-2016, 12:11 PM

Thats awesome buddy... a few things
when/where are the unfinished nationals
count me in for a T shirt
truck looks awesome
oh, and are those snow tires, they would be handy right about now...

lower50's · 04-06-2016, 03:14 PM

Quote:

Originally Posted by CRGRS 66

Thats awesome buddy... a few things
when/where are the unfinished nationals
count me in for a T shirt
truck looks awesome
oh, and are those snow tires, they would be handy right about now...

Thanks
Unfinished Nationals Paris fair grounds Sunday June 5. 8:00-4:00
No the tires are not snow but the next set I have are.

lower50's · 04-06-2016, 03:50 PM

So this morning I started to make a heater duct to go on the end of my 30A electric heater so I can attach the defrost pipes.
I started with a piece of Stainless sheet and 2" pipe. 4 hrs later.
I left the gaps at the front side to give some heat down at your legs.
It's all installed and hooked up just have to tidy some wires. It fits just behind the bottom lip of the dash.
Name: IMG_1681.jpg
Views: 863
Size: 50.3 KB

Name: IMG_1681.jpg
Views: 863
Size: 50.3 KB

Name: IMG_1682.jpg
Views: 854
Size: 61.2 KB

RockinKees · 04-06-2016, 03:59 PM

Nice work!!!!

piratexpress1369a · 04-06-2016, 05:57 PM

That's awesome

lower50's · 04-07-2016, 02:58 PM

Quote:

Originally Posted by RockinKees

Nice work!!!!

Quote:

Originally Posted by piratexpress1369a

That's awesome

Thanks guys

lower50's · 04-07-2016, 03:02 PM

Today I put the running board checker plate back on and installed the box skirts.
I also got my now fake gas filler mounted with it's new gasket and mounting bracket. It just has a screw to the inner cab skin.
Name: IMG_1685.jpg
Views: 823
Size: 41.5 KB

Name: IMG_1685.jpg
Views: 823
Size: 41.5 KB

Name: IMG_1686.jpg
Views: 817
Size: 32.3 KB

Name: IMG_1687.jpg
Views: 820
Size: 57.5 KB

**Advanced Design** · 04-07-2016, 03:35 PM

Good idea to finish out the hole. Hopefully the cap is sealed.

lower50's · 04-07-2016, 03:41 PM

Quote:

Originally Posted by Advanced Design

Good idea to finish out the hole. Hopefully the cap is sealed.

Ya I like the look of the gas cap there even though I'm not using it. Guess I'll find out.

**Dieselwrencher** · 04-07-2016, 04:27 PM

More nice work! That heater will definitely help. My 40 Ford didn't have a heater and it can get sketchy in the fall. Open the cowl vent and enjoy the freeze out.

**joedoh** · 04-07-2016, 09:21 PM

nice job on the cap! I stuck an upside down pop cup from QuikTrip in my 65

It worked to seal against the rubber and didnt let any water in, and not one person noticed.

RockinKees · 04-08-2016, 04:19 AM

Nice touch, Lower!
To keep the cap, it's all in the details!!

May I say I love the '65 of Joedoh too

lower50's · 04-11-2016, 10:29 AM

Quote:

Originally Posted by Dieselwrencher

More nice work! That heater will definitely help. My 40 Ford didn't have a heater and it can get sketchy in the fall. Open the cowl vent and enjoy the freeze out.

Ya I figure I should never need to defrost but I'll need it for defog.

Quote:

Originally Posted by joedoh

nice job on the cap! I stuck an upside down pop cup from QuikTrip in my 65

It worked to seal against the rubber and didnt let any water in, and not one person noticed.

LOL ya it's kind of fun to have details like that.

Quote:

Originally Posted by RockinKees

Nice touch, Lower!
To keep the cap, it's all in the details!!

May I say I love the '65 of Joedoh too

Thanks Kees

lower50's · 04-11-2016, 10:56 AM

Well this weekend I got lots done. Saturday morning I met up with a friend of a friend who works at a local injection shop. We spent 4 hrs going through the pump and injectors. The pump was out of spec and after putting some new parts into it and calibrating, it is perfect. 4 injectors where good 3 where low on pressure and one was blocked by me not having the right tools to take them apart. But all good now. By Saturday night we fired the motor back to life and wow it purrs now, also has wicked throttle response. It was so worth the time and effort. It's amazing how much better it runs on 8 cyl. lol
Sunday got both my door poppers wired permanently, cleaned up my heater wires, also terminated some other wires.
This Saturday is my first drive ever!!

Oh and my bday and my maiden voyage.
Name: IMG_1710.jpg
Views: 737
Size: 66.6 KB

Name: IMG_1717.jpg
Views: 736
Size: 49.1 KB

Name: IMG_1712.jpg
Views: 691
Size: 38.3 KB

Name: IMG_1714.jpg
Views: 737
Size: 49.8 KB

Name: IMG_1719.jpg
Views: 744
Size: 56.7 KB

Valarius_Starchaser · 04-11-2016, 11:50 AM

Wow quite the machine he has there I looked around my town and couldn't find anyone that had even heard of flow matching injectors. Everyone I talked to either said "I don't work on that new crap" or "Just get bigger injectors"

I think we can all agree that we need that madden voyage video

lower50's · 04-11-2016, 12:01 PM

Quote:

Originally Posted by Valarius_Starchaser

Wow quite the machine he has there I looked around my town and couldn't find anyone that had even heard of flow matching injectors. Everyone I talked to either said "I don't work on that new crap" or "Just get bigger injectors"

I think we can all agree that we need that madden voyage video

Yes there will be one!!

CRGRS 66 · 04-11-2016, 12:48 PM

Quote:

Originally Posted by lower50's

Thanks
Unfinished Nationals Paris fair grounds Sunday June 5. 8:00-4:00
No the tires are not snow but the next set I have are.

Dang! Camping with friends at McGregor Point that w/e

ptc · 04-11-2016, 07:49 PM

Quote:

Originally Posted by lower50's

Ya I like the look of the gas cap there even though I'm not using it. Guess I'll find out.

Better be careful of full service gas stations where a kid comes out and fills your tank, washes your windows and checks your oil...... ooops what am I thinking????? this is the 21st century where we have to DO EVERYTHING OURSELVES again..... and they get $15 an HOUR!!!!! to do Nothing

Dont fill up your cab with fuel!!!!

**Advanced Design** · 04-11-2016, 08:43 PM

Hey Lower, nice the engine is hitting on all 8 and you hooked up with someone who knows his business.

How cool is it your first drive is on your birthday! Have fun!

BC Toy chest · 04-11-2016, 08:52 PM

Really nice, sweet build.

**Dieselwrencher** · 04-11-2016, 09:17 PM

Congrats! A test drive on your bday will be too cool! Happy Birthday early too!

04-05-2016, 03:10 PM	#752
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Well some more great news today. I got conformation that due to me winning vehicle of the year last year at the Unfinished Nationals my truck will be on this years T-shirts Also A friend of mine who has a pin-striping business (Petts Pinstriping) was asked to have a booth at the show. He asked me if I want to be a part of his booth. He is working on my show plaque right now and may lay some lines this weekend on my truck. I got the intake back on today. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-05-2016, 05:08 PM	#753
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Rear fenders are on again. http://vid51.photobucket.com/albums/...psdt4azoid.mp4 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-06-2016, 12:11 PM	#755
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: My 52 GMC Build Thats awesome buddy... a few things when/where are the unfinished nationals count me in for a T shirt truck looks awesome oh, and are those snow tires, they would be handy right about now... __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-06-2016, 03:50 PM	#757
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build So this morning I started to make a heater duct to go on the end of my 30A electric heater so I can attach the defrost pipes. I started with a piece of Stainless sheet and 2" pipe. 4 hrs later. I left the gaps at the front side to give some heat down at your legs. It's all installed and hooked up just have to tidy some wires. It fits just behind the bottom lip of the dash. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-06-2016, 03:59 PM	#758
RockinKees Registered User Join Date: Dec 2013 Location: Purmerend, Netherlands Posts: 1,657	Re: My 52 GMC Build Nice work!!!! __________________ Cheers!! Kees. 1959 Chevy Fleetside Longbed My build: http://67-72chevytrucks.com/vboard/s...d.php?t=643426 Kool Guyz CC Instagram: _King_Kustom_

04-06-2016, 05:57 PM	#759
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: My 52 GMC Build That's awesome __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

04-07-2016, 03:02 PM	#761
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Today I put the running board checker plate back on and installed the box skirts. I also got my now fake gas filler mounted with it's new gasket and mounting bracket. It just has a screw to the inner cab skin. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-07-2016, 03:35 PM	#762
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: My 52 GMC Build Good idea to finish out the hole. Hopefully the cap is sealed. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-07-2016, 04:27 PM	#764
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: My 52 GMC Build More nice work! That heater will definitely help. My 40 Ford didn't have a heater and it can get sketchy in the fall. Open the cowl vent and enjoy the freeze out. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-07-2016, 09:21 PM	#765
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,747	Re: My 52 GMC Build nice job on the cap! I stuck an upside down pop cup from QuikTrip in my 65 It worked to seal against the rubber and didnt let any water in, and not one person noticed. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

04-08-2016, 04:19 AM	#766
RockinKees Registered User Join Date: Dec 2013 Location: Purmerend, Netherlands Posts: 1,657	Re: My 52 GMC Build Nice touch, Lower! To keep the cap, it's all in the details!! May I say I love the '65 of Joedoh too __________________ Cheers!! Kees. 1959 Chevy Fleetside Longbed My build: http://67-72chevytrucks.com/vboard/s...d.php?t=643426 Kool Guyz CC Instagram: _King_Kustom_

04-11-2016, 10:56 AM	#768
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Well this weekend I got lots done. Saturday morning I met up with a friend of a friend who works at a local injection shop. We spent 4 hrs going through the pump and injectors. The pump was out of spec and after putting some new parts into it and calibrating, it is perfect. 4 injectors where good 3 where low on pressure and one was blocked by me not having the right tools to take them apart. But all good now. By Saturday night we fired the motor back to life and wow it purrs now, also has wicked throttle response. It was so worth the time and effort. It's amazing how much better it runs on 8 cyl. lol Sunday got both my door poppers wired permanently, cleaned up my heater wires, also terminated some other wires. This Saturday is my first drive ever!! Oh and my bday and my maiden voyage. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

04-11-2016, 11:50 AM	#769
Valarius_Starchaser Registered User Join Date: Sep 2015 Location: Sioux Falls, South Dakota Posts: 702	Re: My 52 GMC Build Wow quite the machine he has there I looked around my town and couldn't find anyone that had even heard of flow matching injectors. Everyone I talked to either said "I don't work on that new crap" or "Just get bigger injectors" I think we can all agree that we need that madden voyage video __________________ "Orange Crush"

04-11-2016, 08:43 PM	#773
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: My 52 GMC Build Hey Lower, nice the engine is hitting on all 8 and you hooked up with someone who knows his business. How cool is it your first drive is on your birthday! Have fun! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-11-2016, 08:52 PM	#774
BC Toy chest Registered User Join Date: Nov 2010 Location: SoCal Posts: 914	Re: My 52 GMC Build Really nice, sweet build. __________________ *I'm not tail-gating, I'm drafting.* http://67-72chevytrucks.com/vboard/s...d.php?t=432758



Register or Log In To remove these advertisements.

04-11-2016, 09:17 PM	#775
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: My 52 GMC Build Congrats! A test drive on your bday will be too cool! Happy Birthday early too! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.