NJ F/S Wiper Delay

[billinthehills]

I would like to purchase one of your gen 2 delays for my 65. My wipers are hooked upon toggle switch and appear to be single speed. Anything out of ordinary to install? If you could send me a PM on how to pay, I would appreciate it.

[twouvakind]

Originally Posted by billinthehills

I would like to purchase one of your gen 2 delays for my 65. My wipers are hooked upon toggle switch and appear to be single speed. Anything out of ordinary to install? If you could send me a PM on how to pay, I would appreciate it.

PM sent and thank you!

[Black Burban]

I received my delay switch a few days ago and installed it last night, works great, and was an easy install, thanks for a great addition to my 66 C-10.

Thought I would share a few things I noted during the install process for mid 60's C-10.
1) After being hooked up or test fit turn the delay switch on first to get delay function, then turn on factory switch for slow or fast speed. If you turn on factory switch first it will over ride the delay switch and you may think it is not working (like I did for a couple minutes...Blonde moment or in my case old and gray...LOL)
2)I used the hole already in the bottom edge of the dash below the wiper switch for the new delay switch (page 2 post #43-48), I just used a washer for correct fit. I also drilled a 1/8 hole for the clocking pin on the new switch next to the factory hole. This keeps both switches near each other for easy use IMO.
3)My factory switch has two connections, one is a two wire and the other a single wire connection. I disconnected the single wire from the back of the factory switch and plugged in the single female connector from the delay then plugged the male connector from delay into the wire that I removed from the back of the factory switch.
4) power and ground were easy as there was a factory screw next to the steering column that worked great for ground. And the left side of fuse block has tabs that are keyed power and the delay power wire plugged right on.

This install took less than an hour and only a couple of hand tools. that was with a test fit of all connections and function first then doing the install. I hope this helps others add a simple yet great addition to there trucks.

[twouvakind]

Originally Posted by Black Burban

I received my delay switch a few days ago and installed it last night, works great, and was an easy install, thanks for a great addition to my 66 C-10.

Thought I would share a few things I noted during the install process for mid 60's C-10.
1) After being hooked up or test fit turn the delay switch on first to get delay function, then turn on factory switch for slow or fast speed. If you turn on factory switch first it will over ride the delay switch and you may think it is not working (like I did for a couple minutes...Blonde moment or in my case old and gray...LOL)
2)I used the hole already in the bottom edge of the dash below the wiper switch for the new delay switch (page 2 post #43-48), I just used a washer for correct fit. I also drilled a 1/8 hole for the clocking pin on the new switch next to the factory hole. This keeps both switches near each other for easy use IMO.
3)My factory switch has two connections, one is a two wire and the other a single wire connection. I disconnected the single wire from the back of the factory switch and plugged in the single female connector from the delay then plugged the male connector from delay into the wire that I removed from the back of the factory switch.
4) power and ground were easy as there was a factory screw next to the steering column that worked great for ground. And the left side of fuse block has tabs that are keyed power and the delay power wire plugged right on.

This install took less than an hour and only a couple of hand tools. that was with a test fit of all connections and function first then doing the install. I hope this helps others add a simple yet great addition to there trucks.

I couldn't have said it better myself, thank you for the install experience and most of all.....THANK YOU FOR DRIVING IN THE RAIN!

[twouvakind]

To top, currently limited to 60-66 production-67 to 72 not available

[cmabolt]

Want to purchase delay for 72. Please pm me eta and pmt info.

Thanks Chris.

[twouvakind]

Originally Posted by cmabolt

Want to purchase delay for 72. Please pm me eta and pmt info.

Thanks Chris.

PM sent, just to be clear-I am still building for 60-66, makes a great gift!

[twouvakind]

To top

[twouvakind]

To top

[twouvakind]

To top

[twouvakind]

To top

[twouvakind]

To top

[twouvakind]

To top

[twouvakind]

To top

[LPS68]

Originally Posted by twouvakind

Ready to ship!

This is the "next gen" wiper delay. The first gen saw much success in the 67-72 forum. This revised model will fit 60-72 MY's. 100% reversible and installs in minutes. Gives you approx. 3-30 seconds of delay and does not require harness cutting, splicing or soldering. The video shows the "install" in my 72, installing it in your 60-66 will be very similar. Instructions specific to 60-66 are included. A big thank you to CaptainFab as he was instrumental in making the adaptation to the 60-66 MY's possible.

http://www.youtube.com/watch?v=SWpj-...ature=youtu.be
Please see this informative post from 67-72:
http://67-72chevytrucks.com/vboard/s...d.php?t=593984

I would like to purchase your wiper delay, how do I contact you?

[Captainfab]

I am in need of a couple of your wiper delays. Do you have any available?

[twouvakind]

Originally Posted by Captainfab

I am in need of a couple of your wiper delays. Do you have any available?

PM sent

[sdwolff98]

Twouv,
I am interested in a 60-66 delay switch as well IM me details how to get one from you?

thanks
Sean

[twouvakind]

PM coming and thank you for looking.

Originally Posted by sdwolff98

Twouv,
I am interested in a 60-66 delay switch as well IM me details how to get one from you?

thanks
Sean

[3drburb]

Are you still selling these wiper delays?
Thanks

[twouvakind]

PM sent

Originally Posted by 3drburb

Are you still selling these wiper delays?
Thanks

[mikie 1954]

I got one, very nice upgrade and simple to install now if we can just get some rain.

[twouvakind]

Thanks for the kind words, enjoy!

Originally Posted by mikie 1954

I got one, very nice upgrade and simple to install now if we can just get some rain.

[PGSigns]

They are a nice setup. Once you put on on and get used to using it would be hard not to have it.
Jimmy

[67chevy4x4c]

I would like to get wiper delay for 67/72