Dash Gauge Bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 06-02-2020, 09:16 AM

Are these all created equal? I see some for as low as 40 bucks and others for 95. What is the difference and what is recommended. I'm willing to buy the higher priced one if it is better, but I wonder if this is a part where one manufacture makes them for everyone.

71gmcC15 · 06-02-2020, 01:58 PM

Not shure I feel like sometimes company's intentionally make the price higher so you will buy it think its should be better quality. Wich yes that would be nice if that's how it worked but it's not.

**TBONE1964** · 06-03-2020, 12:30 AM

Quote:

Originally Posted by 1971Stepside

Are these all created equal? I see some for as low as 40 bucks and others for 95. What is the difference and what is recommended. I'm willing to buy the higher priced one if it is better, but I wonder if this is a part where one manufacture makes them for everyone.

Do you have any links for the $95.00 bezels? Seems a little high. There are only a few manufactures. I sell Counterpart brand for $50.00 plus shipping. A good bezel for the price. Most are equal in quality. All have some minor issues.

I also sell wood grain and carbon fiber bezels and gb doors. These are more money but good quality material.

**1971Stepside** · 06-03-2020, 09:09 AM

Here are a couple different ones. Dakota Digital sells the one I listed from Summit.
I've heard that the black paint comes off the LMC one by rubbing your hand on it.???

https://www.speedwaymotors.com/Dynac...RoC558QAvD_BwE

https://www.summitracing.com/parts/dak-icm-67c-pu

**TBONE1964** · 06-03-2020, 03:17 PM

Quote:

Originally Posted by 1971Stepside

Here are a couple different ones. Dakota Digital sells the one I listed from Summit.
I've heard that the black paint comes off the LMC one by rubbing your hand on it.???

https://www.speedwaymotors.com/Dynac...RoC558QAvD_BwE

https://www.summitracing.com/parts/dak-icm-67c-pu

Ok, I see. Summit is working with Dakota. As far as the cheap ones, I primarily work with Counterpart and have never had a complaint due to paint rub off.

I believe Dynacorn is its own manufacture. They make a nice one for a few extra dollars.

**1971Stepside** · 06-03-2020, 03:32 PM

Thanks for the information

06-02-2020, 09:16 AM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Dash Gauge Bezel Are these all created equal? I see some for as low as 40 bucks and others for 95. What is the difference and what is recommended. I'm willing to buy the higher priced one if it is better, but I wonder if this is a part where one manufacture makes them for everyone. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-02-2020, 01:58 PM	#2
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: Dash Gauge Bezel Not shure I feel like sometimes company's intentionally make the price higher so you will buy it think its should be better quality. Wich yes that would be nice if that's how it worked but it's not. __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

06-03-2020, 09:09 AM	#4
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Dash Gauge Bezel Here are a couple different ones. Dakota Digital sells the one I listed from Summit. I've heard that the black paint comes off the LMC one by rubbing your hand on it.??? https://www.speedwaymotors.com/Dynac...RoC558QAvD_BwE https://www.summitracing.com/parts/dak-icm-67c-pu __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-03-2020, 03:32 PM	#6
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Dash Gauge Bezel Thanks for the information __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.