Doug thorley headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shon · 01-14-2010, 10:34 AM

All Doug Thorley Headers on sale!! Just let me know what you want. I have not loaded all their headers loaded on the site but I can get what ever they have.

Just let me know the part number!!

Thanks!

Blackholebob · 01-20-2010, 11:14 PM

Just wanted to say thanks to Shon, I ordered a set of Thorley big block headers for my 70 c-20 on Monday and they arrived today Wed.You wont beat the price on some Quality headers.The bad part is I won't be home till the weekend to check them out.Thanks again Shon.:Bob

weircc · 01-20-2010, 11:21 PM

my question is how low do the hang?

Blackholebob · 01-21-2010, 12:10 AM

weircc: I wont have the motor installed for a while yet.I'm still working on body work and paint.I'm just trying to pick up parts anytime I can get a good deal and I couldn't pass up the price on theese.Check out summit's price on theese and you will see Shon is giving you one heck of a deal.

1971gmcshortbed · 01-21-2010, 12:48 AM

I need 324-Y right now. Do you have it? D. Thorley doesn't. Let me know.

Shon · 01-21-2010, 09:35 AM

Quote:

Originally Posted by 1971gmcshortbed

I need 324-Y right now. Do you have it? D. Thorley doesn't. Let me know.

DT is 1-2 wks out from having the swap headers ready to be shipped. I have 2 orders waiting patiently. If you want to get in line let me know.

chevy_mike · 01-21-2010, 12:29 PM

What's the cost for a set of 372Y shipped to 92126?

Thanks

1971gmcshortbed · 01-21-2010, 12:39 PM

How much for 324Y shipped to 88011?

Shon · 01-21-2010, 01:14 PM

PMs sent

Patsfan34 · 01-21-2010, 01:37 PM

Quote:

Originally Posted by chevy_mike

What's the cost for a set of 372Y shipped to 92126?

Thanks

Shon can you PM me on 372Y also, shipped to 06615. Thanks

Shon · 01-21-2010, 02:43 PM

Quote:

Originally Posted by patsfan34

shon can you pm me on 372y also, shipped to 06615. Thanks

sent

Twisted78SS · 01-21-2010, 03:27 PM

Not sure on the part number, even after looking over the website.

I would like a price shipped to 98629 for

a 1970 2wd Blazer w/454 automatic

Thanks,
Drew

Shon · 01-21-2010, 04:16 PM

Quote:

Originally Posted by Twisted78SS

Not sure on the part number, even after looking over the website.

I would like a price shipped to 98629 for

a 1970 2wd Blazer w/454 automatic

Thanks,
Drew

DT says the 303 Y C are the ones to get.
I have them loaded on the website, guy from here bought a set earlier this week:
http://67-72chevytrucks.com/vboard/s...07&postcount=2

303YC

Blackholebob · 01-21-2010, 09:24 PM

Twisted, Shon is right on the 303Yc. I called Thorley direct on monday to check if that was the right no.. The sales rep told me that even though they are listed for 73 and up that they do fit our trucks.I have a 70 c-20 with factory bb and automatic.Bob

Blackholebob · 01-23-2010, 12:52 PM

Update! The 303Y has about a 3" tube that sticks out the front of the passenger side header.I assume this would be for a heat riser going to the air cleaner.I'll be running an aftermarket air cleaner so I don't need this.I'm going to contact Thorley to see if they make the same header without this.FYI

Blackholebob · 01-25-2010, 10:44 PM

I contacted Thorley today and I was right about that piece of tubing being for the heat riser for the air cleaner.They don't make one for my truck without it so I will live with it. Name: 600.53.300x200.THY-303Y.jpg
Views: 1410
Size: 26.2 KB

Name: 600.53.300x200.THY-303Y.jpg
Views: 1410
Size: 26.2 KB

63chevyll · 01-25-2010, 10:49 PM

those are te BEST damn street headers i have ever used period

chevy_mike · 01-28-2010, 12:04 PM

Just wanted to say this was a great deal. Ordered my set thinking I was getting the nickle coated one (being cheaper) and was quite surprised they were ceramic coated.

Saved about $125 off Summit's pricing. Thanks Shon!!!!

dazza · 01-29-2010, 05:26 AM

372y-c to 94551?
From what I have researched this is what I'm looking for, please let me know if you (or anybody) knows different. My truck specs are in my sig below.
Thanks

Shon · 01-29-2010, 09:40 AM

Quote:

Originally Posted by dazza

372y-c to 94551?
From what I have researched this is what I'm looking for, please let me know if you (or anybody) knows different. My truck specs are in my sig below.
Thanks

PM'd ya

dazza · 01-29-2010, 10:26 AM

Quote:

Originally Posted by chevy_mike

Just wanted to say this was a great deal. Ordered my set thinking I was getting the nickle coated one (being cheaper) and was quite surprised they were ceramic coated.

Saved about $125 off Summit's pricing. Thanks Shon!!!!

chevy_mike ... you think you could check a measurement for me. I'm looking for the size of point 'A' in the image below. Not sure if my Alan Grove alt bracket is going to clear.
-
-
-

chevy_mike · 01-29-2010, 12:07 PM

Quote:

Originally Posted by dazza

chevy_mike ... you think you could check a measurement for me. I'm looking for the size of point 'A' in the image below. Not sure if my Alan Grove alt bracket is going to clear.
-
-
-

I'll try to get a pic and measurements tonight.

chevy_mike · 01-31-2010, 01:34 AM

Got some pics which I hope help. I am not sure how any bracket would even come close to this with they way they sweep back. Because of the style engine stand I am using, I can't get the headers to fit all the way down in the back. Let me know if you need something else.

dazza · 01-31-2010, 04:12 AM

Thanks Mike,
The bracket I'm using comes back and mounts to the left hole on both the 1st and 2nd tube. I just needed to see that the 1st tube dropped soon enough for clearance. I'll have to confirm it when I'm back at my truck on Monday. Looks like it will. Any chance of getting a measurement on the first tube from the header out, like "A" in the image I posted?
Thanks again,
Darren

chevy_mike · 01-31-2010, 08:45 PM

I measured 4" from the head to the outside of the #1 tube. From the outer header flange to the outside of the #1 tube, 3 5/8"

Hope that helps.

01-20-2010, 11:14 PM	#2
Blackholebob Registered User Join Date: Jan 2010 Location: Nampa Id Posts: 129	Re: Doug thorley headers Just wanted to say thanks to Shon, I ordered a set of Thorley big block headers for my 70 c-20 on Monday and they arrived today Wed.You wont beat the price on some Quality headers.The bad part is I won't be home till the weekend to check them out.Thanks again Shon.:Bob

01-20-2010, 11:21 PM	#3
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Doug thorley headers my question is how low do the hang?

01-21-2010, 12:10 AM	#4
Blackholebob Registered User Join Date: Jan 2010 Location: Nampa Id Posts: 129	Re: Doug thorley headers weircc: I wont have the motor installed for a while yet.I'm still working on body work and paint.I'm just trying to pick up parts anytime I can get a good deal and I couldn't pass up the price on theese.Check out summit's price on theese and you will see Shon is giving you one heck of a deal.

01-21-2010, 12:48 AM	#5
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: Doug thorley headers I need 324-Y right now. Do you have it? D. Thorley doesn't. Let me know.

01-21-2010, 12:29 PM	#7
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Doug thorley headers What's the cost for a set of 372Y shipped to 92126? Thanks __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-14-2010, 10:34 AM	#1
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Doug thorley headers All Doug Thorley Headers on sale!! Just let me know what you want. I have not loaded all their headers loaded on the site but I can get what ever they have. Just let me know the part number!! Thanks! __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

01-21-2010, 12:39 PM	#8
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: Doug thorley headers How much for 324Y shipped to 88011?

01-21-2010, 01:14 PM	#9
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: Doug thorley headers PMs sent __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

01-21-2010, 03:27 PM	#12
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Doug thorley headers Not sure on the part number, even after looking over the website. I would like a price shipped to 98629 for a 1970 2wd Blazer w/454 automatic Thanks, Drew __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

01-21-2010, 09:24 PM	#14
Blackholebob Registered User Join Date: Jan 2010 Location: Nampa Id Posts: 129	Re: Doug thorley headers Twisted, Shon is right on the 303Yc. I called Thorley direct on monday to check if that was the right no.. The sales rep told me that even though they are listed for 73 and up that they do fit our trucks.I have a 70 c-20 with factory bb and automatic.Bob

01-23-2010, 12:52 PM	#15
Blackholebob Registered User Join Date: Jan 2010 Location: Nampa Id Posts: 129	Re: Doug thorley headers Update! The 303Y has about a 3" tube that sticks out the front of the passenger side header.I assume this would be for a heat riser going to the air cleaner.I'll be running an aftermarket air cleaner so I don't need this.I'm going to contact Thorley to see if they make the same header without this.FYI

01-25-2010, 10:44 PM	#16
Blackholebob Registered User Join Date: Jan 2010 Location: Nampa Id Posts: 129	Re: Doug thorley headers I contacted Thorley today and I was right about that piece of tubing being for the heat riser for the air cleaner.They don't make one for my truck without it so I will live with it.

01-25-2010, 10:49 PM	#17
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: Doug thorley headers those are te BEST damn street headers i have ever used period

01-28-2010, 12:04 PM	#18
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Doug thorley headers Just wanted to say this was a great deal. Ordered my set thinking I was getting the nickle coated one (being cheaper) and was quite surprised they were ceramic coated. Saved about $125 off Summit's pricing. Thanks Shon!!!! __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-29-2010, 05:26 AM	#19
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Doug thorley headers 372y-c to 94551? From what I have researched this is what I'm looking for, please let me know if you (or anybody) knows different. My truck specs are in my sig below. Thanks __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----



Register or Log In To remove these advertisements.

01-31-2010, 01:34 AM	#23
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Doug thorley headers Got some pics which I hope help. I am not sure how any bracket would even come close to this with they way they sweep back. Because of the style engine stand I am using, I can't get the headers to fit all the way down in the back. Let me know if you need something else. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-31-2010, 04:12 AM	#24
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Doug thorley headers Thanks Mike, The bracket I'm using comes back and mounts to the left hole on both the 1st and 2nd tube. I just needed to see that the 1st tube dropped soon enough for clearance. I'll have to confirm it when I'm back at my truck on Monday. Looks like it will. Any chance of getting a measurement on the first tube from the header out, like "A" in the image I posted? Thanks again, Darren __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

01-31-2010, 08:45 PM	#25
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Doug thorley headers I measured 4" from the head to the outside of the #1 tube. From the outer header flange to the outside of the #1 tube, 3 5/8" Hope that helps. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

Register or Log In To remove these advertisements.