Parts for Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 01-25-2009, 08:38 PM

These are either off my brother inlaw's 72 truck or my old 67,71 of mine. I know the pictures are not so good but if you see something and want a better pic LMK. I'm not pricing the iteams until I have some interest in it. I would like to sale all of the trim as a set but will break it up if need be.
Trim is off my 71 and his 72.
Full set $200.00+shipping

I know this came off the 72 because I took it off myself.
Intake & carb $75.00 + shipping

Spare tire and some kind of bumper stuff $25.00 + shipping

This came off my 71 last summer. The compressor is done. But it has all the correct mounting brackets. {Brackets only}$40.00 shipped teeitup has 1 chance

Air cleaner $35.00+ shipping

This radio was working when we pulled it out of the 72. $45.00 + shipping

I also have a 4 speed truck shifter with linkage and the clutch assembly out of my 71. I'll get pictures later. You can see the shift in the pic with spare tire holder. I'm not going to say this is all factory stuff but I know it all came out of the three trucks mentioned.
Shifter as is $40.00+ shipping
Clutch assembly $25.00 + shipping
I can also reset the speed odometer. I can swap or you send me yours.
Full Speedo=$25.00 +shipping
The one without a face= $20.00+shipping

I have a few more iteams to list.

Andy4639 · 01-25-2009, 08:40 PM

Factory washer jog with braket. $25.00 + shipping

Factory A/C controller's one has the bracket with it the other doesn't. They have both been fixed by me. I made a small brace and got them working again the slider's had broke on the defroster slide and I fixed it on both controller's.. I have this same fix in my 71 and it has worked fine for almost 10 years now. $15.00 each + shipping the brace is $10.00 more.

super72swb · 01-25-2009, 08:48 PM

Im interested in one of your speedometer! $ and shipped to 76009!

teeitup · 01-25-2009, 08:51 PM

How much for the AC brackets, I don't need the compressor?

**leddzepp** · 01-25-2009, 09:25 PM

I am interested in the trim if you can ship, and if it is complete upper and lower for a longbed.

Edit: It looks like you have 2 sets there...I only need one set, and do not need the tailgate stuff. Thanks, Scott

**Tim Christian** · 01-25-2009, 10:01 PM

You need to post a price on these items. Board Rules! Thanks

kursed · 01-25-2009, 10:15 PM

mow much for the radio shipped to 24401 VA ?

Andy4639 · 01-25-2009, 10:37 PM

I'm not a vendor just a fellow truck lover. These are spare parts I have gathered over the years and I have got to check on each peice as for the shipping so be paitant with me I have a day job.
I have gone back and listed prices for everything and I hope I caught everything. I'm sure somone will let me know if I missed something.
On the speedo's if you have a old one you want turned back. I can do them if you want to pay shipping both ways and for my time. I only have the three speedo"s as of now.

Andy4639 · 01-26-2009, 07:42 AM

The seat belts in the first picture aren't for sale they are being used again. Sorry.

Andy4639 · 01-26-2009, 10:43 AM

OK went to the post office today and they have a box that is $10.35. You can ship anywhere in the USA no matter the weight. If it fits the box. I'm charging $11.00 just to keep money simple. Helps on Gas for the post office.
This is for any of the small stuff.
Speedo's,Radio, brackets I think will fit in these may have to go up a size for all the brackets will see.

super72swb
Im interested in one of your speedometer! $ and shipped to 76009!
$37.00

teeitup
How much for the AC brackets, I don't need the compressor?
$51.00 I didn't put plus shipping on the brackets teeitup sorry about that, if you want them LMK.

kursed
mow much for the radio shipped to 24401 VA ?
$56.00
I'm fixing to leave for NC for a couple of days so if you all want this stuff LMK.
Pay-Pal account is andyfisher@bellsouth.net
If you send the money through pay pal add $2.00 to the total. They have a flat fee but that will do.
leddzepp,
I'm going to stop by the UPS store and see if I can get a long enough tube for the trim. I'll LYK what I find out. A 8' tube is long when you want to ship it.

**leddzepp** · 01-26-2009, 11:53 AM

Andy- Got your PM. Looks like UPS kills the deal. Good luck with your sale. TTT.

**BIGJAKE97** · 01-26-2009, 02:12 PM

is it possible to get the rear bumber brackets without the spare tire mount? or even just the bracket shields? interested either way. shipping to 94538, ca. thanks, jake

teeitup · 01-26-2009, 02:24 PM

Andy, I appreciate your time, but I think I will pass on ths AC brackets since that one has the end cut off it. Sorry, Thanks Randy

kursed · 01-26-2009, 04:28 PM

I'll pass on the radio, thanks though

**lks dcvn** · 01-26-2009, 04:42 PM

How many A/C brackets are there - 7 - and are any of them cut like Randy mentioned? I will hop in line if there are 7 and they are not cut for $40 shipped.

Do you have any more pix of all of the brackets that you are selling for $40 shipped?

jamesi20 · 01-26-2009, 06:22 PM

please pm me a total with shipping on the trim to 44401...thanks,Jim

Phil's 1970 · 01-26-2009, 06:54 PM

I am interested in the complete molding set you have for a longbed. How much would shipping be to Dudley, NC 28333? Also would like to know if you have a spare tire mount and how much? Thanks.

teeitup · 01-26-2009, 07:14 PM

LKS DCVN, the one bracket that comes from the intake on the back of compressor has the end cut off it. He also asking $40 plus shipping for these. Just a heads up, Thanks Randy

Joeys Toy · 01-27-2009, 08:01 PM

Noticed that BigJake97 was interested in the bumper brackets without the spare tire bracket. Am interested in spare tire bracket but not bumper brackets. If this split helps, what price would Spare tire bracket only be to 79705?

jamesi20 · 01-27-2009, 08:57 PM

Still waiting for shipping quote to 44401 on the trim.thanks,Jim

Andy4639 · 01-28-2009, 08:10 AM

Guy's I'm out of town right now and can't do any quotes on shipping.
As soon as I get back home I will find out. The spare tire and bumper mounts I will seperate. Just give me time to get back. Thanks. I just got home and checked the spare tire and bumper brackets, they want fit in the boxes I have. So they will have to go into a bigger box.

jamesi20
I called UPS store and they said by what I told them it looks like about $60.00 to $70.00 bucks to ship. Could be more could be less depending on if we can fit all the peices in one box. Not sure I want to do that and it get bent or scratched up. The 2 upper bed peices have to have a box made for the Length to ship. If you want it LMK. We are talking about 7 -8 feet long box.

weasel29gm · 01-28-2009, 07:49 PM

Andy put me in line for the bumper brackets if your other deals fail. Are they for a sport bumber? Thanks Weasel

Andy4639 · 01-29-2009, 08:24 PM

Here are a better shot of the bumper brackets. I have no idea which bumper they are for.

Here is the rack.

This is the sticker on the side of the radio. It's in tack.

weasel29gm · 01-29-2009, 10:12 PM

If Big Jake passes on the brackets,I'll take em' Weasel

Andy4639 · 01-30-2009, 09:56 AM

The speedo has been droped off at the post office. You should get early next week. Thanks Andy

01-25-2009, 08:38 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Parts for Sale These are either off my brother inlaw's 72 truck or my old 67,71 of mine. I know the pictures are not so good but if you see something and want a better pic LMK. I'm not pricing the iteams until I have some interest in it. I would like to sale all of the trim as a set but will break it up if need be. Trim is off my 71 and his 72. Full set $200.00+shipping I know this came off the 72 because I took it off myself. Intake & carb $75.00 + shipping Spare tire and some kind of bumper stuff $25.00 + shipping This came off my 71 last summer. The compressor is done. But it has all the correct mounting brackets. {Brackets only}$40.00 shipped teeitup has 1 chance Air cleaner $35.00+ shipping This radio was working when we pulled it out of the 72. $45.00 + shipping I also have a 4 speed truck shifter with linkage and the clutch assembly out of my 71. I'll get pictures later. You can see the shift in the pic with spare tire holder. I'm not going to say this is all factory stuff but I know it all came out of the three trucks mentioned. Shifter as is $40.00+ shipping Clutch assembly $25.00 + shipping I can also reset the speed odometer. I can swap or you send me yours. Full Speedo=$25.00 +shipping The one without a face= $20.00+shipping I have a few more iteams to list. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 01-25-2009 at 10:24 PM.

01-25-2009, 08:40 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale Factory washer jog with braket. $25.00 + shipping Factory A/C controller's one has the bracket with it the other doesn't. They have both been fixed by me. I made a small brace and got them working again the slider's had broke on the defroster slide and I fixed it on both controller's.. I have this same fix in my 71 and it has worked fine for almost 10 years now. $15.00 each + shipping the brace is $10.00 more. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 02-13-2009 at 10:12 AM.

01-25-2009, 08:48 PM	#3
super72swb Registered User Join Date: Oct 2008 Location: alvarado texas Posts: 109	Re: Parts for Sale Im interested in one of your speedometer! $ and shipped to 76009!

01-25-2009, 08:51 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parts for Sale How much for the AC brackets, I don't need the compressor? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-25-2009, 09:25 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Parts for Sale I am interested in the trim if you can ship, and if it is complete upper and lower for a longbed. Edit: It looks like you have 2 sets there...I only need one set, and do not need the tailgate stuff. Thanks, Scott Last edited by leddzepp; 01-25-2009 at 09:28 PM. Reason: added info

01-25-2009, 10:01 PM	#6
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Parts for Sale You need to post a price on these items. Board Rules! Thanks

01-25-2009, 10:15 PM	#7
kursed Registered User Join Date: Jul 2006 Location: Augusta County, VA Posts: 146	Re: Parts for Sale mow much for the radio shipped to 24401 VA ?

01-25-2009, 10:37 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale I'm not a vendor just a fellow truck lover. These are spare parts I have gathered over the years and I have got to check on each peice as for the shipping so be paitant with me I have a day job. I have gone back and listed prices for everything and I hope I caught everything. I'm sure somone will let me know if I missed something. On the speedo's if you have a old one you want turned back. I can do them if you want to pay shipping both ways and for my time. I only have the three speedo"s as of now. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-26-2009, 07:42 AM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale The seat belts in the first picture aren't for sale they are being used again. Sorry. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-26-2009, 10:43 AM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale OK went to the post office today and they have a box that is $10.35. You can ship anywhere in the USA no matter the weight. If it fits the box. I'm charging $11.00 just to keep money simple. Helps on Gas for the post office. This is for any of the small stuff. Speedo's,Radio, brackets I think will fit in these may have to go up a size for all the brackets will see. super72swb Im interested in one of your speedometer! $ and shipped to 76009! $37.00 teeitup How much for the AC brackets, I don't need the compressor? $51.00 I didn't put plus shipping on the brackets teeitup sorry about that, if you want them LMK. kursed mow much for the radio shipped to 24401 VA ? $56.00 I'm fixing to leave for NC for a couple of days so if you all want this stuff LMK. Pay-Pal account is andyfisher@bellsouth.net If you send the money through pay pal add $2.00 to the total. They have a flat fee but that will do. leddzepp, I'm going to stop by the UPS store and see if I can get a long enough tube for the trim. I'll LYK what I find out. A 8' tube is long when you want to ship it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-26-2009, 11:53 AM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Parts for Sale Andy- Got your PM. Looks like UPS kills the deal. Good luck with your sale. TTT.

01-26-2009, 02:12 PM	#12
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 264	Re: Parts for Sale is it possible to get the rear bumber brackets without the spare tire mount? or even just the bracket shields? interested either way. shipping to 94538, ca. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

01-26-2009, 02:24 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parts for Sale Andy, I appreciate your time, but I think I will pass on ths AC brackets since that one has the end cut off it. Sorry, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-26-2009, 04:28 PM	#14
kursed Registered User Join Date: Jul 2006 Location: Augusta County, VA Posts: 146	Re: Parts for Sale I'll pass on the radio, thanks though

01-26-2009, 04:42 PM	#15
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Parts for Sale How many A/C brackets are there - 7 - and are any of them cut like Randy mentioned? I will hop in line if there are 7 and they are not cut for $40 shipped. Do you have any more pix of all of the brackets that you are selling for $40 shipped?



Register or Log In To remove these advertisements.

01-26-2009, 06:22 PM	#16
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: Parts for Sale please pm me a total with shipping on the trim to 44401...thanks,Jim

01-26-2009, 06:54 PM	#17
Phil's 1970 Registered User Join Date: Jan 2009 Location: dudley, nc Posts: 42	Re: Parts for Sale I am interested in the complete molding set you have for a longbed. How much would shipping be to Dudley, NC 28333? Also would like to know if you have a spare tire mount and how much? Thanks.

01-26-2009, 07:14 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parts for Sale LKS DCVN, the one bracket that comes from the intake on the back of compressor has the end cut off it. He also asking $40 plus shipping for these. Just a heads up, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-27-2009, 08:01 PM	#19
Joeys Toy Registered User Join Date: Dec 2005 Location: Midland, Texas Posts: 75	Re: Parts for Sale Noticed that BigJake97 was interested in the bumper brackets without the spare tire bracket. Am interested in spare tire bracket but not bumper brackets. If this split helps, what price would Spare tire bracket only be to 79705?

01-27-2009, 08:57 PM	#20
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: Parts for Sale Still waiting for shipping quote to 44401 on the trim.thanks,Jim

01-28-2009, 08:10 AM	#21
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale Guy's I'm out of town right now and can't do any quotes on shipping. As soon as I get back home I will find out. The spare tire and bumper mounts I will seperate. Just give me time to get back. Thanks. I just got home and checked the spare tire and bumper brackets, they want fit in the boxes I have. So they will have to go into a bigger box. jamesi20 I called UPS store and they said by what I told them it looks like about $60.00 to $70.00 bucks to ship. Could be more could be less depending on if we can fit all the peices in one box. Not sure I want to do that and it get bent or scratched up. The 2 upper bed peices have to have a box made for the Length to ship. If you want it LMK. We are talking about 7 -8 feet long box. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 01-28-2009 at 06:19 PM.

01-28-2009, 07:49 PM	#22
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Re: Parts for Sale Andy put me in line for the bumper brackets if your other deals fail. Are they for a sport bumber? Thanks Weasel __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

01-29-2009, 08:24 PM	#23
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale Here are a better shot of the bumper brackets. I have no idea which bumper they are for. Here is the rack. This is the sticker on the side of the radio. It's in tack. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-29-2009, 10:12 PM	#24
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Re: Parts for Sale If Big Jake passes on the brackets,I'll take em' Weasel __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

01-30-2009, 09:56 AM	#25
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Parts for Sale The speedo has been droped off at the post office. You should get early next week. Thanks Andy __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.