KS Chevy GMC Bucket Seat Floor Mounting Brackets - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greentruck · 06-21-2013, 04:43 PM

I'll take a set if you have any left. Paypal info?
Posted via Mobile Device

**RogerKoop** · 06-22-2013, 12:43 PM

Quote:

Originally Posted by greentruck

I'll take a set if you have any left. Paypal info?
Posted via Mobile Device

send as gift to rogerkoop@sprintmail.com

greentruck · 06-22-2013, 04:07 PM

$$$ sent as gift. Thanks!
Posted via Mobile Device

**davischevy** · 06-23-2013, 09:07 PM

I Sent as a gift.

**RogerKoop** · 06-23-2013, 09:47 PM

Quote:

Originally Posted by davischevy

I Sent as a gift.

Got it. Whats your mailing address?

**davischevy** · 06-23-2013, 10:06 PM

Quote:

Originally Posted by RogerKoop

Got it. Whats your mailing address?

212 Coy Street
Harrison, AR 72601

**nitrosport_5** · 07-02-2013, 08:49 PM

Roger are there any of these left? I would love to have a set of them!

**RogerKoop** · 07-03-2013, 08:40 AM

Quote:

Originally Posted by nitrosport_5

Roger are there any of these left? I would love to have a set of them!

Yes I still have some sets left.

I accept MO, Checks or Credit Cards Over the phone.

For Paypal add 3% for the ride or send as gift. rogerkoop@sprintmail.com

Thanks

darkhorse970 · 07-03-2013, 08:43 AM

I'm interested in a set, please PM a phone #
Posted via Mobile Device

**nitrosport_5** · 07-03-2013, 10:42 AM

Quote:

Originally Posted by RogerKoop

Yes I still have some sets left.

I accept MO, Checks or Credit Cards Over the phone.

For Paypal add 3% for the ride or send as gift. rogerkoop@sprintmail.com

Thanks

great! I will take a set. will send PayPal gift payment in a while and pm you my address. thanks!
Posted via Mobile Device

**nitrosport_5** · 07-03-2013, 03:32 PM

money sent roger, will pm my shipping address
Posted via Mobile Device

kaphillips · 09-01-2013, 06:24 PM

roger I will take a set if you have a full set of brackets.. Pm me and I will provide you with shipping address and all... However there is still the unique full width support bracket that connects between the cab supports that is bout 46-50 inches. do you have one of those, known any one that might, or are they being reproduced yet---here is a url that shows goods pics of the brace I am speaking of.

http://67-72chevytrucks.com/vboard/s...d.php?t=317529

**Classic Bowties** · 09-01-2013, 07:11 PM

Quote:

Originally Posted by rpatowers

You sent me brackets for the rear bolts on both the driver and pasenger side seats. What am I supposed to use for the front bolts on both seats? I realize that one of the front bolts on the passenger seat is bolted into an existing bracket. But what do I use for the other front bolts? Do they require bracing?

Quote:

Originally Posted by RogerKoop

The front bucket mounting just used a square nut welded to the floor. No additional floor support brackets was used except for what was used for the bench seat. I will take some photos of the front mounting and add them later

Mr. Koop, was just directed (by another member w/?'s) to your F/S thread and the above quoted answer from post #37 which contains some incorrect info. All of the 69-72 A50 bucket optioned pickups, suburbans and of course blazers had a fwd x-member brace joining the two main cab floor supports if truck/suburban or rocker boxes if blazer/jimmy that the front attaching point of the bucket seat brackets were securely bolted into. We have posted detailed bottom view pictures of OE bucket seat floor pans in several threads on this website over the years, if you have a look at some of these old threads on the subject you will see that there was a fwd cross member brace originally used. Mel

RideSF · 09-01-2013, 08:55 PM

I'll take 3 set. Pm your info thanks.
Posted via Mobile Device

**DANTIP** · 09-05-2013, 08:50 AM

Quote:

Originally Posted by Classic Bowties

Mr. Koop, was just directed (by another member w/?'s) to your F/S thread and the above quoted answer from post #37 which contains some incorrect info. All of the 69-72 A50 bucket optioned pickups, suburbans and of course blazers had a fwd x-member brace joining the two main cab floor supports if truck/suburban or rocker boxes if blazer/jimmy that the front attaching point of the bucket seat brackets were securely bolted into. We have posted detailed bottom view pictures of OE bucket seat floor pans in several threads on this website over the years, if you have a look at some of these old threads on the subject you will see that there was a fwd cross member brace originally used. Mel

Here are a few of Mel's pics of the mentioned front bucket seat brace.

Dan

70ptta · 09-05-2013, 10:06 AM

Ill take 2 if you still have them?

**RogerKoop** · 09-05-2013, 10:22 AM

Quote:

Originally Posted by 70ptta

Ill take 2 if you still have them?

Yes I still have some sets left.

I accept MO, Checks or Credit Cards Over the phone.

For Paypal add 3% for the ride or send as gift to rogerkoop@sprintmail.com

Thanks

**Classic Bowties** · 09-06-2013, 04:21 PM

Quote:

Originally Posted by rpatowers

You sent me brackets for the rear bolts on both the driver and pasenger side seats. What am I supposed to use for the front bolts on both seats? I realize that one of the front bolts on the passenger seat is bolted into an existing bracket. But what do I use for the other front bolts? Do they require bracing?

Quote:

Originally Posted by RogerKoop

The front bucket mounting just used a square nut welded to the floor. No additional floor support brackets was used except for what was used for the bench seat. I will take some photos of the front mounting and add them later

Quote:

Originally Posted by Classic Bowties

Mr. Koop, was just directed (by another member w/?'s) to your F/S thread and the above quoted answer from post #37 which contains some incorrect info. All of the 69-72 A50 bucket optioned pickups, suburbans and of course blazers had a fwd x-member brace joining the two main cab floor supports if truck/suburban or rocker boxes if blazer/jimmy that the front attaching point of the bucket seat brackets were securely bolted into. We have posted detailed bottom view pictures of OE bucket seat floor pans in several threads on this website over the years, if you have a look at some of these old threads on the subject you will see that there was a fwd cross member brace originally used. Mel

Mr. Koop, just noticed that you never replied back to our above post from a few days ago. Here are some clear detailed pictures taken just yesterday to go with my above reply regarding the 69-72 pickup bucket seat fwd x-member brace marked below @ yellow arrows. We have easily owned, sold and or traded somewhere around thirty to thirty five 69-72 bucket seat trucks and or cabs over the years and am not trying to come of as being an a-hole on the matter, just trying to get the correct info out there after being told by one of your bracket buyers that we are wrong/incorrect because "Roger says a fwd brace was never used on bucket seat trucks". Mel

RideSF · 09-07-2013, 04:58 PM

Got them today, thanks roger
Posted via Mobile Device

dirish · 09-09-2013, 09:37 AM

Pm sent. I would like a set also. Thanks
Posted via Mobile Device

**RogerKoop** · 10-30-2013, 01:33 PM

ttt

**lavisw** · 10-30-2013, 01:54 PM

interested pm me a phone#

True 67 · 10-31-2013, 07:44 AM

are there any more left?

True

**RogerKoop** · 10-31-2013, 08:27 AM

Quote:

Originally Posted by True 67

are there any more left?

True

Yes I still have some set left.

Vintage Windmills · 10-31-2013, 01:20 PM

did you also make up the 4 or so ft long brace that goes from driver to pass side? These brackets look well made.

06-21-2013, 04:43 PM	#51
greentruck Registered User Join Date: Feb 2009 Location: Ormond Beach, FL Posts: 208	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'll take a set if you have any left. Paypal info? Posted via Mobile Device

06-22-2013, 04:07 PM	#53
greentruck Registered User Join Date: Feb 2009 Location: Ormond Beach, FL Posts: 208	Re: Chevy GMC Bucket Seat Floor Mounting Brackets $$$ sent as gift. Thanks! Posted via Mobile Device

06-23-2013, 09:07 PM	#54
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I Sent as a gift.

07-02-2013, 08:49 PM	#57
nitrosport_5 Senior Member Join Date: Jul 2012 Location: St. John, Washington Posts: 617	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Roger are there any of these left? I would love to have a set of them! __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

07-03-2013, 08:43 AM	#59
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'm interested in a set, please PM a phone # Posted via Mobile Device __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

07-03-2013, 03:32 PM	#61
nitrosport_5 Senior Member Join Date: Jul 2012 Location: St. John, Washington Posts: 617	Re: Chevy GMC Bucket Seat Floor Mounting Brackets money sent roger, will pm my shipping address Posted via Mobile Device __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

09-01-2013, 06:24 PM	#62
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Chevy GMC Bucket Seat Floor Mounting Brackets roger I will take a set if you have a full set of brackets.. Pm me and I will provide you with shipping address and all... However there is still the unique full width support bracket that connects between the cab supports that is bout 46-50 inches. do you have one of those, known any one that might, or are they being reproduced yet---here is a url that shows goods pics of the brace I am speaking of. http://67-72chevytrucks.com/vboard/s...d.php?t=317529

09-01-2013, 08:55 PM	#64
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'll take 3 set. Pm your info thanks. Posted via Mobile Device

09-05-2013, 10:06 AM	#66
70ptta Registered User Join Date: Jul 2007 Location: san jose ca Posts: 172	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Ill take 2 if you still have them?

09-07-2013, 04:58 PM	#69
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Got them today, thanks roger Posted via Mobile Device

09-09-2013, 09:37 AM	#70
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,124	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Pm sent. I would like a set also. Thanks Posted via Mobile Device

10-30-2013, 01:33 PM	#71
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,806	Re: Chevy GMC Bucket Seat Floor Mounting Brackets ttt __________________ Roger Koop

10-30-2013, 01:54 PM	#72
lavisw Active Member Join Date: Aug 2007 Location: Terrell Tx Posts: 114	Re: Chevy GMC Bucket Seat Floor Mounting Brackets interested pm me a phone#

10-31-2013, 07:44 AM	#73
True 67 Registered User Join Date: Sep 2010 Location: Austell, Ga Posts: 151	Re: Chevy GMC Bucket Seat Floor Mounting Brackets are there any more left? True

10-31-2013, 01:20 PM	#75
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Chevy GMC Bucket Seat Floor Mounting Brackets did you also make up the 4 or so ft long brace that goes from driver to pass side? These brackets look well made. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.