Project Lemon Drop: anything but stock! - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 02-15-2010, 01:38 AM

Quote:

Originally Posted by west9378

Earlier it was stated that you filled or welded the rear cab roof seam can I ask why you did that and does it have any advantages.
Thank you in advance.

It was done purely to clean up the look of the cab. We did a lot of suttle changes to the truck, that only someone who is familiar with the style of truck will notice. The roof seam was just one of them

OARNGESI · 02-15-2010, 06:21 AM

Looks great

west9378 · 02-15-2010, 11:41 AM

Quote:

Originally Posted by jugernot

It was done purely to clean up the look of the cab. We did a lot of suttle changes to the truck, that only someone who is familiar with the style of truck will notice. The roof seam was just one of them

Thank you, I asked that because around the top of my back glass I have rust and I wanted to blame that seam for my problems.
Again thank you.

aggie91 · 02-16-2010, 03:22 PM

Your Truck looks outstanding. Looks like your on the down hill side for sure now.

Where/Who's bags/plates/cups did you use for your airbag set up?

Alan's Classic · 02-17-2010, 12:56 AM

Beautiful build you got there. Keep it up.

Aggie91 referred me over here. My fuel line from pump to carb has been giving me fits. I think I'm on the downhill side as far as the fuel line goes.

**FRENCHBLUE72** · 04-15-2010, 08:36 PM

Are we done yet?

jugernot · 04-15-2010, 08:55 PM

Quote:

Originally Posted by FRENCHBLUE72

Are we done yet?

I wish. Just waiting my turn for a return visit to the LFD shop.

chevytruckluver · 06-10-2010, 10:56 PM

It's about time for an update!

NertiN · 08-02-2010, 02:36 PM

Nice project!!!

hotrodhomi · 08-02-2010, 04:05 PM

what's the next step?

jugernot · 08-02-2010, 05:18 PM

Sorry but still not much progress. I just had to buy a new fridge and it was not cheap. I had been working on completing the AC/Heater lines in the engine bay. Sounds easy right, NOT. I think I have it done, but I there may be some interference with the inner fender wells. So some modification may be in order.

I have also collected and stacked together the parts Kevin my need when he takes the truck to do some work. re-allign the front sheet metal, wet sand and polish the paint. complete the mess I made of the Painless harnress. Install the Accu-air control system, and what ever else I can convince him to do. I hope we can get it far enough to turn the engine over. I dieing to hear what that 327 sounds like with no exhaust. I hope after it gets back to my house, it will be just a matter of putting little bits back on.

Thanks for your interest and patients.

Rokcrln · 08-05-2010, 11:09 PM

Well you are off to a good start with a big box of brownie mix right on top for me! I am a bit behind as I just quit my regular job last monday and start the new company this next monday. So their will be a learning curve to work through but it will be worth in in the end. You want to hear it run, I want to see you try and look at it in the sun after a bit of cutting and polishing!!

Kevin
LFD Inc.

jugernot · 08-14-2010, 11:45 PM

I have read a couple of threads regarding registering a truck with a black and gold California license plates and how the DMV requires the plate to have a YOM sticker on it. Some time ago I bought a pair of CA commercial plates and after a little work I discovered that the first year the plate was registered was 1968 same as my truck. So hopefully things will go smooth when I try to register them to my truck.

I also have a pair of passenger vehicle plates that I will work on as well.

**FRENCHBLUE72** · 08-15-2010, 10:55 AM

Im thinkin that if you show up in your work car and possibly work uniform I dont see how they could say no and if they do take them for a ride hahahahahaa

green68 · 09-17-2010, 02:36 PM

very nice

dutsuno · 09-19-2010, 05:00 PM

looks good!!

tranz am · 09-27-2010, 01:29 PM

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

jugernot · 09-27-2010, 11:50 PM

Quote:

Originally Posted by tranz am

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

Sounds good.

huero · 09-28-2010, 12:40 AM

Quote:

Originally Posted by tranz am

Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II.
we might just have to hang out one of these days and shoot the snit.

Tranz Am is your name Chuck?

tranz am · 09-28-2010, 01:13 AM

Nope. My name is Travis a.k.a. Greased Lightning, Tranz Am, and Northbay Street Machines. All me.

Quote:

Originally Posted by huero

Tranz Am is your name Chuck?

huero · 09-28-2010, 01:16 AM

o.k. Sorry. Have a friend in Santa Rosa with a Nova and truck same color as yours.

tranz am · 09-28-2010, 06:04 PM

no kidding? thats rare

looks like we have something in common then.
is he on here too?

Quote:

Originally Posted by huero

o.k. Sorry. Have a friend in Santa Rosa with a Nova and truck same color as yours.

huero · 09-28-2010, 10:46 PM

He's on Stevesnovasite as chuckhas62 i believe.

tranz am · 09-30-2010, 04:34 PM

cool, I'll look for him. thanks.

Quote:

Originally Posted by huero

He's on Stevesnovasite as chuckhas62 i believe.

jugernot · 12-08-2010, 12:46 AM

Well I have become a victim of the financial crunch. My bills have got the best of me and I couldn’t ignore them any more. So I used the money I was saving for Lemon Drop to help ease the burden.

I do have plenty of parts sitting around to keep myself busy. Today I started pulling the TH350 Trans to swap it for the 700r4.

After that I may pull the dog house to install the inner fender wells.

Maybe since I need to pulled the dog house off, I could swap the transmission then. hhmmmmmmm?????????

02-15-2010, 06:21 AM	#452
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Project Lemon Drop: anything but stock! Looks great __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

02-16-2010, 03:22 PM	#454
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Lemon Drop: anything but stock! Your Truck looks outstanding. Looks like your on the down hill side for sure now. Where/Who's bags/plates/cups did you use for your airbag set up? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-17-2010, 12:56 AM	#455
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Project Lemon Drop: anything but stock! Beautiful build you got there. Keep it up. Aggie91 referred me over here. My fuel line from pump to carb has been giving me fits. I think I'm on the downhill side as far as the fuel line goes. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-15-2010, 08:36 PM	#456
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project Lemon Drop: anything but stock! Are we done yet? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-10-2010, 10:56 PM	#458
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Project Lemon Drop: anything but stock! It's about time for an update!

08-02-2010, 02:36 PM	#459
NertiN Registered User Join Date: Nov 2009 Location: Culiacan Sinaloa Mexico Posts: 13	Re: Project Lemon Drop: anything but stock! Nice project!!!

08-02-2010, 04:05 PM	#460
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Project Lemon Drop: anything but stock! what's the next step? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

08-02-2010, 05:18 PM	#461
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Sorry but still not much progress. I just had to buy a new fridge and it was not cheap. I had been working on completing the AC/Heater lines in the engine bay. Sounds easy right, NOT. I think I have it done, but I there may be some interference with the inner fender wells. So some modification may be in order. I have also collected and stacked together the parts Kevin my need when he takes the truck to do some work. re-allign the front sheet metal, wet sand and polish the paint. complete the mess I made of the Painless harnress. Install the Accu-air control system, and what ever else I can convince him to do. I hope we can get it far enough to turn the engine over. I dieing to hear what that 327 sounds like with no exhaust. I hope after it gets back to my house, it will be just a matter of putting little bits back on. Thanks for your interest and patients. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

08-05-2010, 11:09 PM	#462
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Lemon Drop: anything but stock! Well you are off to a good start with a big box of brownie mix right on top for me! I am a bit behind as I just quit my regular job last monday and start the new company this next monday. So their will be a learning curve to work through but it will be worth in in the end. You want to hear it run, I want to see you try and look at it in the sun after a bit of cutting and polishing!! Kevin LFD Inc.

08-14-2010, 11:45 PM	#463
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! I have read a couple of threads regarding registering a truck with a black and gold California license plates and how the DMV requires the plate to have a YOM sticker on it. Some time ago I bought a pair of CA commercial plates and after a little work I discovered that the first year the plate was registered was 1968 same as my truck. So hopefully things will go smooth when I try to register them to my truck. I also have a pair of passenger vehicle plates that I will work on as well. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 Last edited by jugernot; 08-14-2010 at 11:51 PM.

08-15-2010, 10:55 AM	#464
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Project Lemon Drop: anything but stock! Im thinkin that if you show up in your work car and possibly work uniform I dont see how they could say no and if they do take them for a ride hahahahahaa __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-17-2010, 02:36 PM	#465
green68 Registered User Join Date: May 2009 Location: cajun Posts: 42	Re: Project Lemon Drop: anything but stock! very nice

09-19-2010, 05:00 PM	#466
dutsuno Registered User Join Date: May 2010 Location: phoenix Posts: 52	Re: Project Lemon Drop: anything but stock! looks good!!

09-27-2010, 01:29 PM	#467
tranz am Registered User Join Date: Apr 2007 Location: Santa Rosa, Ca Posts: 586	Re: Project Lemon Drop: anything but stock! Looks great! you hit me up on steves nova site yesterday. I have that 64 chevy II. we might just have to hang out one of these days and shoot the snit. __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=456220 Best 1/4 mile time 12.1 @ 111 w/traction issues 1969 GMC SWB 1964 chevy II Nova ht Last edited by tranz am; 09-27-2010 at 01:30 PM.

09-28-2010, 01:16 AM	#471
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Project Lemon Drop: anything but stock! o.k. Sorry. Have a friend in Santa Rosa with a Nova and truck same color as yours.



Register or Log In To remove these advertisements.

09-28-2010, 10:46 PM	#473
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Project Lemon Drop: anything but stock! He's on Stevesnovasite as chuckhas62 i believe.

12-08-2010, 12:46 AM	#475
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Well I have become a victim of the financial crunch. My bills have got the best of me and I couldn’t ignore them any more. So I used the money I was saving for Lemon Drop to help ease the burden. I do have plenty of parts sitting around to keep myself busy. Today I started pulling the TH350 Trans to swap it for the 700r4. After that I may pull the dog house to install the inner fender wells. Maybe since I need to pulled the dog house off, I could swap the transmission then. hhmmmmmmm????????? __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

Register or Log In To remove these advertisements.