GA Blazer Jacking Instructions Decal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 08-03-2015, 08:34 PM

I had the Blazer "Jacking Instructions" decal reproduced for my restoration and have some spares. This was a difficult decal to reproduce. I ended up having to do the illustrations myself. I would consider this a tribute reproduction. I took great pains to copy the factory version exactly, it is nonetheless, not identical to the factory piece. I am pleased with it (and wouldn't put it on my truck or offer it to you guys if I wasn't).

Like the valve cover decal I have listed in the truck forum, I have a few "beta" versions of this decal that required further sorting. The only difference between the "beta" and final versions is a little printing "artifact" in the lower right and left corners. You can see it in the first pic and in the comparison shot of the final and "beta" versions below.

Final version $20 shipped
"Beta" version $15 shipped

tjsblazer · 08-03-2015, 08:41 PM

I will take one of your 'Final' versions. PM me how you would like to be paid.
Thanks, Jeff.

**IronCanine** · 08-03-2015, 08:48 PM

PM sent.

smbrouss70 · 08-03-2015, 08:50 PM

I'll take a final version also.

**IronCanine** · 08-03-2015, 08:58 PM

Quote:

Originally Posted by smbrouss70

I'll take a final version also.

Thanks Steven...PM sent.

tjsblazer · 08-03-2015, 09:03 PM

Quote:

Originally Posted by IronCanine

PM sent.

Paypal send and PM return with shipping address. Thanks, Jeff.

ls1nova71 · 08-03-2015, 09:23 PM

I'll take one of the beta versions if you think it can just be trimmed off. PM me your PayPal. Thanks

jaybirdk5 · 08-03-2015, 09:34 PM

I would like a final version if you have any left. Thank You

**IronCanine** · 08-03-2015, 09:37 PM

Quote:

Originally Posted by ls1nova71

I'll take one of the beta versions if you think it can just be trimmed off. PM me your PayPal. Thanks

You could easily trim it off, but it does have round corners...so that might be hard. It's really not that much of a thing. I think you may like it just fine without trimming it. It is such a busy piece, it would take a discerning eye to catch it unless you were right up on it.

**IronCanine** · 08-03-2015, 09:51 PM

Quote:

Originally Posted by ls1nova71

I'll take one of the beta versions if you think it can just be trimmed off. PM me your PayPal. Thanks

Quote:

Originally Posted by jaybirdk5

I would like a final version if you have any left. Thank You

PMs sent.

**raggedjim** · 08-03-2015, 10:00 PM

I'll take a final if you still have or a beta if that's all that is left, PM me your Paypal.

Thanks, Rg

jaybirdk5 · 08-03-2015, 10:16 PM

Money sent thru PayPal. Thanks again for making these.

**DeadheadNM** · 08-03-2015, 10:31 PM

I'll take one of each please.

**IronCanine** · 08-03-2015, 10:36 PM

Quote:

Originally Posted by raggedjim

I'll take a final if you still have or a beta if that's all that is left, PM me your Paypal.

Thanks, Rg

PM sent.

Quote:

Originally Posted by jaybirdk5

Money sent thru PayPal. Thanks again for making these.

Thanks.

Quote:

Originally Posted by DeadheadNM

I'll take one of each please.

PM sent.

drillrod · 08-03-2015, 10:49 PM

I will take one of your final versions, PM me your info!

asolde · 08-03-2015, 10:58 PM

I would take a final version if you have one.

**IronCanine** · 08-03-2015, 11:10 PM

Quote:

Originally Posted by drillrod

I will take one of your final versions, PM me your info!

Quote:

Originally Posted by asolde

I would take a final version if you have one.

PMs sent.

asolde · 08-04-2015, 05:36 AM

Sent you pay pal Thanks Alex

**1rippen6** · 08-04-2015, 07:28 AM

I will take one of the final versions PM me your paypal info

Minnz · 08-04-2015, 08:28 AM

I will take a final version.

Thanks!

Lee

**IronCanine** · 08-04-2015, 08:28 AM

Quote:

Originally Posted by asolde

Sent you pay pal Thanks Alex

Thanks.

Quote:

Originally Posted by 1rippen6

I will take one of the final versions PM me your paypal info

PM sent.

**IronCanine** · 08-04-2015, 08:29 AM

Quote:

Originally Posted by Minnz

I will take a final version.

Thanks!

Lee

PM sent.

Minnz · 08-04-2015, 08:38 AM

Quote:

Originally Posted by IronCanine

PM sent.

Payment sent.

Thanks

**IronCanine** · 08-04-2015, 09:20 AM

Quote:

Originally Posted by Minnz

Payment sent.

Thanks

Thanks Lee.

**raggedjim** · 08-04-2015, 10:09 AM

You should have Paypal, hope I'm not too late...

Rg

08-03-2015, 08:34 PM	#1
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Blazer Jacking Instructions Decal I had the Blazer "Jacking Instructions" decal reproduced for my restoration and have some spares. This was a difficult decal to reproduce. I ended up having to do the illustrations myself. I would consider this a tribute reproduction. I took great pains to copy the factory version exactly, it is nonetheless, not identical to the factory piece. I am pleased with it (and wouldn't put it on my truck or offer it to you guys if I wasn't). Like the valve cover decal I have listed in the truck forum, I have a few "beta" versions of this decal that required further sorting. The only difference between the "beta" and final versions is a little printing "artifact" in the lower right and left corners. You can see it in the first pic and in the comparison shot of the final and "beta" versions below. Final version $20 shipped "Beta" version $15 shipped Attached Images __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

08-03-2015, 08:41 PM	#2
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,521	Re: Blazer Jacking Instructions Decal I will take one of your 'Final' versions. PM me how you would like to be paid. Thanks, Jeff. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

08-03-2015, 08:48 PM	#3
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,535	Re: Blazer Jacking Instructions Decal PM sent. __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

08-03-2015, 08:50 PM	#4
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Blazer Jacking Instructions Decal I'll take a final version also. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-03-2015, 09:23 PM	#7
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Blazer Jacking Instructions Decal I'll take one of the beta versions if you think it can just be trimmed off. PM me your PayPal. Thanks __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

08-03-2015, 09:34 PM	#8
jaybirdk5 Registered User Join Date: Dec 2014 Location: Kirkland,IL. Posts: 163	Re: Blazer Jacking Instructions Decal I would like a final version if you have any left. Thank You

08-03-2015, 10:00 PM	#11
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,369	Re: Blazer Jacking Instructions Decal I'll take a final if you still have or a beta if that's all that is left, PM me your Paypal. Thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

08-03-2015, 10:16 PM	#12
jaybirdk5 Registered User Join Date: Dec 2014 Location: Kirkland,IL. Posts: 163	Re: Blazer Jacking Instructions Decal Money sent thru PayPal. Thanks again for making these.

08-03-2015, 10:31 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,285	Re: Blazer Jacking Instructions Decal I'll take one of each please. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-03-2015, 10:49 PM	#15
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: Blazer Jacking Instructions Decal I will take one of your final versions, PM me your info!

08-03-2015, 10:58 PM	#16
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: Blazer Jacking Instructions Decal I would take a final version if you have one. __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

08-04-2015, 05:36 AM	#18
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: Blazer Jacking Instructions Decal Sent you pay pal Thanks Alex __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

08-04-2015, 07:28 AM	#19
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,709	Re: Blazer Jacking Instructions Decal I will take one of the final versions PM me your paypal info

08-04-2015, 08:28 AM	#20
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 255	Re: Blazer Jacking Instructions Decal I will take a final version. Thanks! Lee __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

08-04-2015, 10:09 AM	#25
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,369	Re: Blazer Jacking Instructions Decal You should have Paypal, hope I'm not too late... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.