The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-28-2017, 11:08 PM   #76
James the III
Registered User
 
Join Date: Nov 2016
Location: lowell ma
Posts: 750
Re: If you like destruction -

Quote:
Originally Posted by BossHogg69 View Post
I haven't checked the spring pressure, they're still on the heads. I gave the spec sheet to the shop that set up the heads, and I didn't check them myself after he set them up.

.
Not asking if the springs where set up correctly..
I'd like to know if the spring is NOW at the correct spring height and if the on seat and open pressures are still in spec.. As this will tell you if the spring lost strength and allowed the valve to float..
if many of the springs installed height is wrong.. you'll see that now.. but I'd want to measure more than just one for this. as the fails spring if it weakened will most likely be shorter now than when installed..
James the III is offline   Reply With Quote
Reply

Bookmarks

Tags
454, bbc, big block, big block chevy


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com