More pictures of my new '67 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pritch · 07-31-2015, 10:59 PM

True to his word, the guy I bought it from delivered it to me last night. It's certainly not without it's problems, but I'm pretty happy with it.

First the bad. The cab floor and bed wood is shot:

But the rockers have been changed already, and he gave me a floor pan kit that he had bought:

The driver's side cab corner looks solid, but the right side will need replaced, along with the cab support. Didn't get a picture of that, I guess.

Now the good. Straight and mostly rust-free:

Looks like a little bondo at the back of the bedside:

Not sure if it's correct, but it has a tow hook on the passenger side:

Brand new aluminum radiator:

More to come...

pritch · 07-31-2015, 11:14 PM

...More. This is supposed to be a 327. I haven't ran the numbers yet, but it looks like it certainly could be. The stamped numbers are V0920YH:

Still has the restraint cables for a broken motor mount:

Both sides:

Not sure what kind of carb this is. Rochester, I suppose. The number on the rebuild tag is 7027125. It's allegedly the only thing keeping the engine from running. I have a good 4Bbl here to swap on and see:

I need to find out what rear end this is, too:

Anyway, that's pretty much it. I don't have the time or money to do anything with it this year, but long range plans are to make it safe and sound and maybe use it for either a camper (since it's a camper special) or pull a trailer. Probably dump the V8 for a six, because I like them better. Maybe some kind of O-drive. We'll just have to see what happens.

iowarust · 07-31-2015, 11:27 PM

looks like a good start, also looks better than the one i drive!!

swamp rat · 08-01-2015, 02:23 AM

That's an Eaton HO52 rear end.

cooperhw · 08-01-2015, 10:45 AM

Looks like a good start to me. Congratulations to you and the truck. You got a new truck. Truck got his life saved.

hotrodder · 08-01-2015, 08:08 PM

nice project!! nothing like having a good ole truck to work on.keep sending pics of your progress.

pritch · 08-02-2015, 12:54 AM

As near as I can tell, it has the original engine. At least the YH on the stamped numbers means it's a '67 327. The carb I didn't recognize is a Rochester 4G (4 jet). The PO, who seemed to know his stuff, said that it must have been early in the production run because these carbs were leftovers from '66. I don't know if that's true, but it's a Janesville truck and the VIN would indicate that it was number 4977 off the line. The SPID is missing, so it's no help. I gave a cursory look for the build sheet, but I didn't see it anywhere. I'll have to pull the seat out and see if it's hiding somewhere.

**special-K** · 08-02-2015, 06:44 AM

That's a good truck. Probably a TH400 and the HO52 is probably 4.10. Is it a Custom model? I spy the fancy door panel

Redline novdog · 08-02-2015, 03:51 PM

Very nice truck! well worth some time and money!!! Enjoy. FYI if you go to replace the 4-jet with another carb, beware the 4-jets are straight bore the intake will not accept a spread bore carb. without using an adapter !!

pritch · 08-02-2015, 11:21 PM

Quote:

Originally Posted by special-K

That's a good truck. Probably a TH400 and the HO52 is probably 4.10. Is it a Custom model? I spy the fancy door panel

Sure enough, TH400 and Custom. I might just go ahead and rebuild the carb so I can at least see what works and what don't.

Codez67Chevy · 08-03-2015, 01:04 PM

Nice find.

**michael bustamante** · 08-03-2015, 02:15 PM

if you get rid of the engine id sure be interested for my 67. i had that same carb on a '65 283

midniteblues · 08-03-2015, 06:16 PM

from my understanding 67 was the last year for the 4 jet. i was looking for one till i decided to bbc mine.

looks like a great truck too work with. go over those brakes real good fire it up and go cruise

i'd say that ps side mm is a lil' off

pritch · 08-03-2015, 11:41 PM

Quote:

Originally Posted by midniteblues

i'd say that ps side mm is a lil' off

Haw! I hadn't really noticed that until I looked closer at the picture. Maybe it's a good thing the cables were in place!

**special-K** · 08-04-2015, 12:13 AM

Quote:

Originally Posted by midniteblues

from my understanding 67 was the last year for the 4 jet. i was looking for one till i decided to bbc mine.

Yep, 68s had Q-jet. That 4-jet was a good carb, but I'm a fool for that spread bore, a very great idea.

67 chevelle · 08-04-2015, 08:23 AM

The 4 jet is a small carb , I think 500 cfm , I have a 65 327 that has the same carb
from the looks of your bed sides there were hooks at one time on the side , aka camper special

sboris · 08-04-2015, 09:06 AM

Neat ol truck. Got alot of potential. Congrats!!

07-31-2015, 10:59 PM	#1
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	More pictures of my new '67 C20 True to his word, the guy I bought it from delivered it to me last night. It's certainly not without it's problems, but I'm pretty happy with it. First the bad. The cab floor and bed wood is shot: But the rockers have been changed already, and he gave me a floor pan kit that he had bought: The driver's side cab corner looks solid, but the right side will need replaced, along with the cab support. Didn't get a picture of that, I guess. Now the good. Straight and mostly rust-free: Looks like a little bondo at the back of the bedside: Not sure if it's correct, but it has a tow hook on the passenger side: Brand new aluminum radiator: More to come... __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

07-31-2015, 11:14 PM	#2
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: More pictures of my new '67 C20 ...More. This is supposed to be a 327. I haven't ran the numbers yet, but it looks like it certainly could be. The stamped numbers are V0920YH: Still has the restraint cables for a broken motor mount: Both sides: Not sure what kind of carb this is. Rochester, I suppose. The number on the rebuild tag is 7027125. It's allegedly the only thing keeping the engine from running. I have a good 4Bbl here to swap on and see: I need to find out what rear end this is, too: Anyway, that's pretty much it. I don't have the time or money to do anything with it this year, but long range plans are to make it safe and sound and maybe use it for either a camper (since it's a camper special) or pull a trailer. Probably dump the V8 for a six, because I like them better. Maybe some kind of O-drive. We'll just have to see what happens. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

07-31-2015, 11:27 PM	#3
iowarust Registered User Join Date: Jul 2015 Location: Drakesville IA Posts: 27	Re: More pictures of my new '67 C20 looks like a good start, also looks better than the one i drive!!

08-01-2015, 02:23 AM	#4
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: More pictures of my new '67 C20 That's an Eaton HO52 rear end. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

08-01-2015, 10:45 AM	#5
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: More pictures of my new '67 C20 Looks like a good start to me. Congratulations to you and the truck. You got a new truck. Truck got his life saved. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

08-01-2015, 08:08 PM	#6
hotrodder Registered User Join Date: Oct 2011 Location: Bloomington Indiana Posts: 322	Re: More pictures of my new '67 C20 nice project!! nothing like having a good ole truck to work on.keep sending pics of your progress.

08-02-2015, 12:54 AM	#7
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: More pictures of my new '67 C20 As near as I can tell, it has the original engine. At least the YH on the stamped numbers means it's a '67 327. The carb I didn't recognize is a Rochester 4G (4 jet). The PO, who seemed to know his stuff, said that it must have been early in the production run because these carbs were leftovers from '66. I don't know if that's true, but it's a Janesville truck and the VIN would indicate that it was number 4977 off the line. The SPID is missing, so it's no help. I gave a cursory look for the build sheet, but I didn't see it anywhere. I'll have to pull the seat out and see if it's hiding somewhere. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

08-02-2015, 06:44 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: More pictures of my new '67 C20 That's a good truck. Probably a TH400 and the HO52 is probably 4.10. Is it a Custom model? I spy the fancy door panel __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-02-2015, 03:51 PM	#9
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: More pictures of my new '67 C20 Very nice truck! well worth some time and money!!! Enjoy. FYI if you go to replace the 4-jet with another carb, beware the 4-jets are straight bore the intake will not accept a spread bore carb. without using an adapter !! __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

08-03-2015, 01:04 PM	#11
Codez67Chevy Registered User Join Date: Nov 2012 Location: Spanish Fork Ut Posts: 370	Re: More pictures of my new '67 C20 Nice find. __________________ " Dead Pumpkin" 67 Chevy short bed, 292 I6, 4spd manual. Fan of the "Slant Noses". 93' Toyota pickup 2WD 2dr and 32mpg. Daily driver. 300k+ Members I've met... Mister-B

08-03-2015, 02:15 PM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: More pictures of my new '67 C20 if you get rid of the engine id sure be interested for my 67. i had that same carb on a '65 283 __________________ 1967custom

08-03-2015, 06:16 PM	#13
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: More pictures of my new '67 C20 from my understanding 67 was the last year for the 4 jet. i was looking for one till i decided to bbc mine. looks like a great truck too work with. go over those brakes real good fire it up and go cruise i'd say that ps side mm is a lil' off __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

08-04-2015, 08:23 AM	#16
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: More pictures of my new '67 C20 The 4 jet is a small carb , I think 500 cfm , I have a 65 327 that has the same carb from the looks of your bed sides there were hooks at one time on the side , aka camper special __________________ 68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive

08-04-2015, 09:06 AM	#17
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: More pictures of my new '67 C20 Neat ol truck. Got alot of potential. Congrats!! __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.