Ignition switch removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Solver · 03-25-2002, 12:05 AM

My new blue 72 needs new ignition switch and bezel. Looks like the last guy tried to pry out with a screw driver. Please refresh me on proper procedure. I know that pin hole is there for a reason

------------------[list] [*] 1972 Cheyenne Super 20 LWB[*] 1972 Cheyenne Super 10 LWB[*] 1972 Chevy Custom 20[*] 1971 Cheyenne 10 LWB[*] 1968 1/2 ton lwb project[*] 2 1980 camaros 1 done 1 getting started[*] 3 1949 ford 8n tractors[*] 1987 camaro[*] 1996 Chevy Tahoe
/[list]

*Fast68Chevy* · 03-25-2002, 12:10 AM

paperclip and counterclockwise usually works

neonlarry · 03-25-2002, 12:20 AM

Ok, you probably know some of this already, but I will tell you what I know about how to do it. 1. stick a paper cilp in the hole, put the key in and turn it to the Acc. position, push the paper clip in and the switch should come out. 2. unplug the wires from the switch (this part looks simple, but the plug is really hard to get out. 3. unscrew the bezel from the metal piece that the ignition switch fits into. I hope that helps

03-25-2002, 12:05 AM	#1
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Ignition switch removal My new blue 72 needs new ignition switch and bezel. Looks like the last guy tried to pry out with a screw driver. Please refresh me on proper procedure. I know that pin hole is there for a reason ------------------[list] [] 1972 Cheyenne Super 20 LWB[] 1972 Cheyenne Super 10 LWB[] 1972 Chevy Custom 20[] 1971 Cheyenne 10 LWB[] 1968 1/2 ton lwb project[] 2 1980 camaros 1 done 1 getting started[] 3 1949 ford 8n tractors[] 1987 camaro[*] 1996 Chevy Tahoe /[list] __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

03-25-2002, 12:20 AM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Ok, you probably know some of this already, but I will tell you what I know about how to do it. 1. stick a paper cilp in the hole, put the key in and turn it to the Acc. position, push the paper clip in and the switch should come out. 2. unplug the wires from the switch (this part looks simple, but the plug is really hard to get out. 3. unscrew the bezel from the metal piece that the ignition switch fits into. I hope that helps __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-25-2002, 12:10 AM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	paperclip and counterclockwise usually works



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.