Flowmaster poll what do you like? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super C10 · 01-08-2012, 01:06 PM

Hey Guys i have been a member on here for awhile now and wanted to collect your guys opinions. Im currently in school in wyoming and lookin to do some work to my old 72 super come may this year. This is what i got a 1987 chevy 350 with aftermarket cast iron ceterbolt heads, performer intake, edelbrock 600 cfm carb and hooker headers. I wanna do a complete exhaust on the truck in may from headers to the bumper. I was thinkin 2 and 1/2 inch true dual but dont have any idea on mufflers. I do like the sound of flowmasters tho, i kinda want a head turning exhaust. I will be thankful for any help with the exhaust guys so tell me what you have heard.

Thanks, Super C10

dukcaln · 01-08-2012, 01:16 PM

morning, I run headers into 2 1/2 straight to two chamber flowmasters.... they dump right down to the ground 3" after the outlet of the flows... sounds freaking awsome... I was going to run the exhaust all the way back to the bumper but when my buddy did his all the way back with same set up it really made his too quiet and he lost that rumble at stop lights and it didn't sound as good when he hammered it....but that is just my opinon...and there will be many different ones ...enjoy

westgl · 01-08-2012, 01:20 PM

Can you post a sound bite so we can hear your exhaust?

thanks

westgl

dukcaln · 01-08-2012, 01:56 PM

no exhaust smell in cab on mine..... just far enough back.... x2 on 40's 2 chamber

1972RedNeck · 01-08-2012, 05:00 PM

I've got Flowmaster Super 40's dumped out behind the tire. They sound sweet. I may never use a set of glass packs again.

85chevy383 · 01-08-2012, 05:05 PM

I think you will be happy with any flowmaster you choose, I had 2 chambers with 2 1/2" pipe previously and sounded good, this time I went with 3 chambers and 3" pipe and its a tough call on which sound I like better
Posted via Mobile Device

sbc10guy · 01-08-2012, 05:31 PM

I have 2 1/2 inch out the back with dual flowmaster super 44s and i love the sound. I would totally recommend them over a glass pack. A little more expensive but worth it.

**CC69Rat** · 01-08-2012, 06:02 PM

I went with Magnaflows on my BB truck, and I'm tellin ya.. Flow Masters sound good but Magnaflows are different enough to make people wonder what you have. Just my .02, Everyone has Flow Masters. I just wanted something different.

You owe it to yourself to check them out too. Nothing against Flowmaster, but, just sayin ..

crazy longhorn · 01-08-2012, 08:26 PM

I have 50's Flows on my longhorn(specs in my signature). I like them, but the Magnaflow on my 02 silverado really has the sound I like

I plan to put a pair of Magnaflows on the old truck. best of fun,crazyL

landsurvey1 · 01-08-2012, 08:29 PM

Check out youtube for some vids.

dukcaln · 01-08-2012, 11:59 PM

Magnaflow are awsome too...... but wanna sound wicked, get some borla.... now they sound RAW!!!

ProStreet68SB · 01-09-2012, 12:03 AM

Goerlich Mufflers are the way to fly IMO.

1968 Big Block Chevy c10 490hp+ 454bbc goerlich...

greywuuf · 01-09-2012, 12:45 AM

Can't believe no one has has suggested the Super trapp disc system, that is a sound! ....kinda a pain to deal with but it does sound like a sprint car ;-)

just throwing it out there
Dan

Meatman · 01-09-2012, 01:19 AM

10 series single chambers here. Probably a little louder then what you are wanting.

New Custom Cam - YouTube

mud.man.rj · 01-09-2012, 01:26 AM

I have 3" all the way back with super 44"s on my 525hp 454 and I love the way it sounds but think I would like it a bit better dumping just past the diff.

sanford66 · 01-09-2012, 03:42 AM

Quote:

Originally Posted by dukcaln

morning, I run headers into 2 1/2 straight to two chamber flowmasters.... they dump right down to the ground 3" after the outlet of the flows... sounds freaking awsome... I was going to run the exhaust all the way back to the bumper but when my buddy did his all the way back with same set up it really made his too quiet and he lost that rumble at stop lights and it didn't sound as good when he hammered it....but that is just my opinon...and there will be many different ones ...enjoy

X2 on this setup! Joseph

dukcaln · 01-09-2012, 01:17 PM

lots of good ideas but it boils down to what you want to hear and what do you want for looks.....

AustinScott · 01-10-2012, 01:22 AM

I know this is a flow-master poll thread, & just to be fair if I went with flow-master I would go with the 44's

But I went with SPINTECH, they sound great & are built like a tank!
here are some video my son and I made with our flipcam.

"ignore the slipping belt screech... it was having a bad hair day :-) "

WAlk around video

Garage - Cold startup

Out in Driveway - Cold startup

**70cst** · 01-10-2012, 01:28 AM

Quote:

Originally Posted by AustinScott

I know this is a flow-master poll thread, & just to be fair if I went with flow-master I would go with the 44's

But I went with SPINTECH, they sound great & are built like a tank!
here are some video my son and I made with our flipcam.

"ignore the slipping belt screech... it was having a bad hair day :-) "

WAlk around video

Garage - Cold startup

Out in Driveway - Cold startup

X2 as this is what I have connected to my factory exhaust

dukcaln · 01-10-2012, 01:51 AM

Quote:

Originally Posted by ProStreet68SB

Goerlich Mufflers are the way to fly IMO.

1968 Big Block Chevy c10 490hp+ 454bbc goerlich mufflers 3inch exhaust - YouTube

cheater, its a big block they always sound mean....LOL

01-08-2012, 01:06 PM	#1
Super C10 Registered User Join Date: Mar 2009 Location: Sedro-Woolley, WA Posts: 36	Flowmaster poll what do you like? Hey Guys i have been a member on here for awhile now and wanted to collect your guys opinions. Im currently in school in wyoming and lookin to do some work to my old 72 super come may this year. This is what i got a 1987 chevy 350 with aftermarket cast iron ceterbolt heads, performer intake, edelbrock 600 cfm carb and hooker headers. I wanna do a complete exhaust on the truck in may from headers to the bumper. I was thinkin 2 and 1/2 inch true dual but dont have any idea on mufflers. I do like the sound of flowmasters tho, i kinda want a head turning exhaust. I will be thankful for any help with the exhaust guys so tell me what you have heard. Thanks, Super C10 __________________ 1972 Cheyenne Super 1971 CST Blazer Hickey Tribute 1967 CST C20 Parts Truck 1954 GMC 660 COE Roll Deck Shop Truck 1970 GMC 3500 Motorhome Parts Truck 1972 K5 Part Out

01-08-2012, 01:16 PM	#2
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Flowmaster poll what do you like? morning, I run headers into 2 1/2 straight to two chamber flowmasters.... they dump right down to the ground 3" after the outlet of the flows... sounds freaking awsome... I was going to run the exhaust all the way back to the bumper but when my buddy did his all the way back with same set up it really made his too quiet and he lost that rumble at stop lights and it didn't sound as good when he hammered it....but that is just my opinon...and there will be many different ones ...enjoy __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

01-08-2012, 01:20 PM	#3
westgl Registered User Join Date: Oct 2009 Location: Central Point, Oregon Posts: 166	Re: Flowmaster poll what do you like? Can you post a sound bite so we can hear your exhaust? thanks westgl

01-08-2012, 01:56 PM	#4
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Flowmaster poll what do you like? no exhaust smell in cab on mine..... just far enough back.... x2 on 40's 2 chamber __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

01-08-2012, 05:05 PM	#6
85chevy383 Registered User Join Date: Nov 2011 Location: Splendora Texas Posts: 87	Re: Flowmaster poll what do you like? I think you will be happy with any flowmaster you choose, I had 2 chambers with 2 1/2" pipe previously and sounded good, this time I went with 3 chambers and 3" pipe and its a tough call on which sound I like better Posted via Mobile Device

01-08-2012, 05:31 PM	#7
sbc10guy Registered User Join Date: Sep 2011 Location: Eau Claire, Wisconsin Posts: 415	Re: Flowmaster poll what do you like? I have 2 1/2 inch out the back with dual flowmaster super 44s and i love the sound. I would totally recommend them over a glass pack. A little more expensive but worth it. __________________ 1969 shortbed c/10 1998 GMC sierra

01-08-2012, 06:02 PM	#8
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: Flowmaster poll what do you like? I went with Magnaflows on my BB truck, and I'm tellin ya.. Flow Masters sound good but Magnaflows are different enough to make people wonder what you have. Just my .02, Everyone has Flow Masters. I just wanted something different. You owe it to yourself to check them out too. Nothing against Flowmaster, but, just sayin .. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-08-2012, 08:26 PM	#9
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: Flowmaster poll what do you like? I have 50's Flows on my longhorn(specs in my signature). I like them, but the Magnaflow on my 02 silverado really has the sound I like I plan to put a pair of Magnaflows on the old truck. best of fun,crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-08-2012, 08:29 PM	#10
landsurvey1 Registered User Join Date: Jan 2009 Location: Arizona Posts: 404	Re: Flowmaster poll what do you like? Check out youtube for some vids. __________________ 1972 Chevy short bed ZZ4 350/355hp GMPP crate engine. 1972 Cheyenne K-20 454/400hp big block 1988 Jeep Wrangler 2010 Jeep Sport Unlimited

01-08-2012, 11:59 PM	#11
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Flowmaster poll what do you like? Magnaflow are awsome too...... but wanna sound wicked, get some borla.... now they sound RAW!!! __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

01-09-2012, 12:45 AM	#13
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 516	Re: Flowmaster poll what do you like? Can't believe no one has has suggested the Super trapp disc system, that is a sound! ....kinda a pain to deal with but it does sound like a sprint car ;-) just throwing it out there Dan

01-09-2012, 01:26 AM	#15
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Flowmaster poll what do you like? I have 3" all the way back with super 44"s on my 525hp 454 and I love the way it sounds but think I would like it a bit better dumping just past the diff.

01-09-2012, 01:17 PM	#17
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Flowmaster poll what do you like? lots of good ideas but it boils down to what you want to hear and what do you want for looks..... __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.