Anybody recognise this box cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy88 · 01-09-2012, 05:14 PM

Looking for a box cover like this but don't know the manufacturer as I would like to order one for my truck. So any leads would be helpful.

pickupman · 01-09-2012, 07:21 PM

Cannot remember but I have 2 of them. I know they were out of TN

big mike71 · 01-09-2012, 08:32 PM

It looks like mine, If it is it's from Craftec Inc. They are about a 1/4" too short, it leaves a gap between the end of the cover and tailgate.

chevy88 · 01-09-2012, 09:17 PM

Thanks for the info I will look into the company to see if they still make them.

**special-K** · 01-10-2012, 07:10 AM

CheckMate? They were the first to make a flush mount. I'm sure there are others now

www.checkerpro.com

screamin_c10 · 01-10-2012, 07:21 AM

Doesn't look like my Craftec... I don't have the rib down the center, his isn't sagging into the bed, the corners sit flush, and there doesn't seem to be a 1/2" gap between the tailgate and edge of the cover....

big mike71 · 01-10-2012, 10:11 PM

Quote:

Originally Posted by screamin_c10

Doesn't look like my Craftec... I don't have the rib down the center, his isn't sagging into the bed, the corners sit flush, and there doesn't seem to be a 1/2" gap between the tailgate and edge of the cover....

I hate mine I'm going buy something else. my gap is only 1/4", it doesn't sag in the middle, but it doesn't fit right.

chevy88 · 01-10-2012, 11:39 PM

Quote:

Originally Posted by big mike71

I hate mine I'm going buy something else. my gap is only 1/4", it doesn't sag in the middle, but it doesn't fit right.

Thats good to know before I decide which kind to get.

screamin_c10 · 01-11-2012, 05:12 AM

Quote:

Originally Posted by big mike71

I hate mine I'm going buy something else. my gap is only 1/4", it doesn't sag in the middle, but it doesn't fit right.

Yeah, Mine sags because it never stays put. Its just a bit narrow for the bed I think and one side or the other likes to slip down between the rails when we get heavy rain. I keep it open most of the time to keep it from doing just that.

I guess its good for a trailer queen or truck that never sees weather, but up here in Oregon we see a lot of rain... Lesson learned I guess. I'll probably pull it off for the remainder of the winter and reinstall it for summer time cruising.

01-09-2012, 05:14 PM	#1
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Anybody recognise this box cover Looking for a box cover like this but don't know the manufacturer as I would like to order one for my truck. So any leads would be helpful. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

01-09-2012, 07:21 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Re: Anybody recognise this box cover Cannot remember but I have 2 of them. I know they were out of TN __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

01-09-2012, 08:32 PM	#3
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: Anybody recognise this box cover It looks like mine, If it is it's from Craftec Inc. They are about a 1/4" too short, it leaves a gap between the end of the cover and tailgate. __________________ I'm not as good as I once was, But I'm as good once as I ever was.

01-09-2012, 09:17 PM	#4
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: Anybody recognise this box cover Thanks for the info I will look into the company to see if they still make them. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

01-10-2012, 07:10 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Anybody recognise this box cover CheckMate? They were the first to make a flush mount. I'm sure there are others now www.checkerpro.com __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2012, 07:21 AM	#6
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,750	Re: Anybody recognise this box cover Doesn't look like my Craftec... I don't have the rib down the center, his isn't sagging into the bed, the corners sit flush, and there doesn't seem to be a 1/2" gap between the tailgate and edge of the cover.... __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.