TX Painless LS1 Engine Management - The 1947 - Present Chevrolet & GMC Truck Message Board Network

james overstreet · 07-20-2013, 12:55 AM

I have a Painless LS1 engine management system that include the wiring harness and computer. This has never been installed. I bought it as the perfect hi-rpm kit that came with a Comp cam for $1400, but the cam is not included. Painless offered a kit as I am selling it called the perfect engine management kit which retailed for $1304.99. I'm asking $500 for it. I also have a Baumann Optishift stand alone transmission controller for 4l60e and 4l80e GM transmissions. This will allow you to run an electronic overdrive behind your engine and allow you to control your shift points as well as have multiple settings for the street or track. It also includes the wiring harness. Cost over $550 new, asking $400 never installed.

Posted via Mobile Device
Posted via Mobile Device

Last_Paladin · 07-20-2013, 08:33 AM

Do you have part numbers? I am interested in both.

**1971 GMC SHORTY** · 07-20-2013, 09:57 AM

part number on trans stuff.. thanks

**paul mora** · 07-20-2013, 10:12 AM

I will take both pm me payment info
Posted via Mobile Device

james overstreet · 07-20-2013, 07:23 PM

You will have to excuse my forum etiquette short comings, I'm pretty new at this. I seems to be the norm that the first "I'll take it" gets first shot so paul mora is up. I hope I haven't created any hard feelings. I also didn't discuss shipping, so it will be on me. Again, I apologize for any confusion. PM coming your way, Paul.
Posted via Mobile Device

Last_Paladin · 07-21-2013, 09:56 AM

Quote:

Originally Posted by james overstreet

You will have to excuse my forum etiquette short comings, I'm pretty new at this. I seems to be the norm that the first "I'll take it" gets first shot so paul mora is up. I hope I haven't created any hard feelings. I also didn't discuss shipping, so it will be on me. Again, I apologize for any confusion. PM coming your way, Paul.
Posted via Mobile Device

None here. I didn't say I'd take it. There are different harness for a 4L80E, so I asked about part numbers.

If it were the one I wanted, I'd have bought. Paul seems to be willing to take some risk or repin the transmission connector. I am not

classicchev · 07-21-2013, 12:42 PM

If things fall through for some reason, I will take it.

Darren

Last_Paladin · 07-21-2013, 01:10 PM

Quote:

Originally Posted by classicchev

If things fall through for some reason, I will take it.

Darren

I am in the same boat. Not sure what protocol says there.

classicchev · 07-21-2013, 01:15 PM

Whenever I sell anything its always the first "I will take it " that gets it. Everyone has questions etc., and those questions may not be the answer required and then it just drags on forever..

Hopefully Pail follows through

kingsolver72 · 07-21-2013, 06:21 PM

Yeah,everything is copasetic.
Posted via Mobile Device

james overstreet · 07-21-2013, 09:48 PM

I'm going to make a call to the manufacturer of the trans controller tomorrow to clarify some things. Thanks for everyones patience, I want to provide the best info I can. Hopefully I get better with my forum etiquette as I have alot more parts to post.
Posted via Mobile Device

cst70rocket · 07-22-2013, 10:39 AM

Put me in line if everyone else falls out please!

Last_Paladin · 07-22-2013, 11:09 AM

Well, I am not sure where I am in line or what's happening, but I will take them both if they get to me.

I called 'em, I can re-pin to make it work for me.

james overstreet · 07-22-2013, 01:49 PM

I just got off the phone with Baumann Electronics and was told that the wiring harness I have is for both the 4l60e and 4l80e. When you are doing the setup you select which trans you have and the controller adjusts the pins internally. Paul has decided to pass so if I read the thread right. Classicchev is up. I will send you a PM classicchev. James
Posted via Mobile Device

**Chevy4Life** · 07-22-2013, 07:59 PM

Quote:

Originally Posted by james overstreet

You will have to excuse my forum etiquette short comings, I'm pretty new at this. I seems to be the norm that the first "I'll take it" gets first shot so paul mora is up. I hope I haven't created any hard feelings. I also didn't discuss shipping, so it will be on me. Again, I apologize for any confusion. PM coming your way, Paul.
Posted via Mobile Device

It is always up to the SELLER to decide if "I'll take it" gets first dibs. I prefer to answer any and all questions. I want the buyer to know what he's getting and that he will be satisfied with the purchase.

Looks like "I'll take it" decided to pass.

classicchev · 07-23-2013, 12:26 AM

what is the part number of the Painless harness?

I will let you know as soon as I get the number

james overstreet · 07-23-2013, 01:24 AM

The part number of the kit I bought which included the Comp cam is 65206, without the cam, which is how I am selling it, it is the same as part number 65106. I talked to Painless awhile back and the computer is the same calibration. They stated that the cam isn't a big enough change to warrant a tune change.
Posted via Mobile Device

james overstreet · 07-24-2013, 01:07 PM

Well, I provided the requested info to classicchev with no response so I am deciding to move to the next in line. If I read this right Last Paladin is up next. PM coming your way.
Posted via Mobile Device

Last_Paladin · 07-24-2013, 03:58 PM

I received your PM. I will take them both.

Firmly and resolutely, I will take 'em

james overstreet · 07-24-2013, 05:38 PM

Sold to Last_Paladin pending payment. Thanks James.
Posted via Mobile Device

classicchev · 07-25-2013, 12:10 AM

Sorry, missed looking at the thread.
Posted via Mobile Device

Last_Paladin · 09-14-2017, 10:44 PM

Funny thing is I've never used either of these.

*randy500* · 09-15-2017, 12:20 AM

Is the stuff for sale?

Last_Paladin · 01-20-2020, 08:23 PM

Quote:

Originally Posted by randy500

Is the stuff for sale?

Yep.

N9nefingers · 01-24-2020, 01:56 PM

Curious about the price of these?

07-20-2013, 12:55 AM	#1
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Painless LS1 Engine Management I have a Painless LS1 engine management system that include the wiring harness and computer. This has never been installed. I bought it as the perfect hi-rpm kit that came with a Comp cam for $1400, but the cam is not included. Painless offered a kit as I am selling it called the perfect engine management kit which retailed for $1304.99. I'm asking $500 for it. I also have a Baumann Optishift stand alone transmission controller for 4l60e and 4l80e GM transmissions. This will allow you to run an electronic overdrive behind your engine and allow you to control your shift points as well as have multiple settings for the street or track. It also includes the wiring harness. Cost over $550 new, asking $400 never installed. Posted via Mobile Device Posted via Mobile Device

07-20-2013, 08:33 AM	#2
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 472	Re: Painless LS1 Engine Management Do you have part numbers? I am interested in both.

07-20-2013, 09:57 AM	#3
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: Painless LS1 Engine Management part number on trans stuff.. thanks __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

07-20-2013, 10:12 AM	#4
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 975	Re: Painless LS1 Engine Management I will take both pm me payment info Posted via Mobile Device __________________ Pulatoy

07-20-2013, 07:23 PM	#5
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management You will have to excuse my forum etiquette short comings, I'm pretty new at this. I seems to be the norm that the first "I'll take it" gets first shot so paul mora is up. I hope I haven't created any hard feelings. I also didn't discuss shipping, so it will be on me. Again, I apologize for any confusion. PM coming your way, Paul. Posted via Mobile Device

07-21-2013, 12:42 PM	#7
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Painless LS1 Engine Management If things fall through for some reason, I will take it. Darren __________________ 67- 72 Parts collecter

07-21-2013, 01:15 PM	#9
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Painless LS1 Engine Management Whenever I sell anything its always the first "I will take it " that gets it. Everyone has questions etc., and those questions may not be the answer required and then it just drags on forever.. Hopefully Pail follows through __________________ 67- 72 Parts collecter

07-21-2013, 06:21 PM	#10
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,200	Re: Painless LS1 Engine Management Yeah,everything is copasetic. Posted via Mobile Device __________________ Fight the good fight, finish the race, keep the faith

07-21-2013, 09:48 PM	#11
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management I'm going to make a call to the manufacturer of the trans controller tomorrow to clarify some things. Thanks for everyones patience, I want to provide the best info I can. Hopefully I get better with my forum etiquette as I have alot more parts to post. Posted via Mobile Device

07-22-2013, 10:39 AM	#12
cst70rocket Registered User Join Date: Sep 2005 Location: San Angelo or Eufaula Posts: 301	Re: Painless LS1 Engine Management Put me in line if everyone else falls out please!

07-22-2013, 11:09 AM	#13
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 472	Re: Painless LS1 Engine Management Well, I am not sure where I am in line or what's happening, but I will take them both if they get to me. I called 'em, I can re-pin to make it work for me.

07-22-2013, 01:49 PM	#14
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management I just got off the phone with Baumann Electronics and was told that the wiring harness I have is for both the 4l60e and 4l80e. When you are doing the setup you select which trans you have and the controller adjusts the pins internally. Paul has decided to pass so if I read the thread right. Classicchev is up. I will send you a PM classicchev. James Posted via Mobile Device

07-23-2013, 12:26 AM	#16
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Painless LS1 Engine Management what is the part number of the Painless harness? I will let you know as soon as I get the number __________________ 67- 72 Parts collecter

07-23-2013, 01:24 AM	#17
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management The part number of the kit I bought which included the Comp cam is 65206, without the cam, which is how I am selling it, it is the same as part number 65106. I talked to Painless awhile back and the computer is the same calibration. They stated that the cam isn't a big enough change to warrant a tune change. Posted via Mobile Device

07-24-2013, 01:07 PM	#18
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management Well, I provided the requested info to classicchev with no response so I am deciding to move to the next in line. If I read this right Last Paladin is up next. PM coming your way. Posted via Mobile Device



Register or Log In To remove these advertisements.

07-24-2013, 03:58 PM	#19
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 472	Re: Painless LS1 Engine Management I received your PM. I will take them both. Firmly and resolutely, I will take 'em

07-24-2013, 05:38 PM	#20
james overstreet Registered User Join Date: Mar 2012 Location: Mt. Pleasant, TX Posts: 17	Re: Painless LS1 Engine Management Sold to Last_Paladin pending payment. Thanks James. Posted via Mobile Device

07-25-2013, 12:10 AM	#21
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Painless LS1 Engine Management Sorry, missed looking at the thread. Posted via Mobile Device __________________ 67- 72 Parts collecter

09-14-2017, 10:44 PM	#22
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 472	Re: Painless LS1 Engine Management Funny thing is I've never used either of these.

09-15-2017, 12:20 AM	#23
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Painless LS1 Engine Management Is the stuff for sale?

01-24-2020, 01:56 PM	#25
N9nefingers Registered User Join Date: Dec 2018 Location: Ewa Beach Hawaii Posts: 73	Re: Painless LS1 Engine Management Curious about the price of these?

Register or Log In To remove these advertisements.