KY Gmc 351e big block v6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 10-25-2023, 07:31 PM

GMC 1966 351E big block V6 out of a suburban that had 4 speed. Dressed pretty much as it was removed. Ran good when removed, suburban was customized reason for removal. It has PS installed and dealer installed AC parts in box (date coded 12/65). Price $500, needs to go, local pick up. Trying to sell whole to some one who needs, other wise will strip for parts. More photos if needed. AC parts are in a box not installed, under dash type unit by Eaton.

Still editing

1960chevypanel · 10-25-2023, 08:56 PM

Interested in PS including pulleys if you part out

**55-72 GM trucks** · 11-04-2023, 10:23 AM

So, These are my questions
1) is the Y pipe in tact or cut?
2) is the air cleaner not with it?
3) is the 4 speed still attached and does it come with it or available separately?

AngryPirate · 11-27-2023, 05:24 PM

The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket.

I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders?

You may see him pop into the classifieds.

He saved my bacon because he has gaskets for our trucks.

1960chevypanel · 11-27-2023, 06:44 PM

Quote:

Originally Posted by AngryPirate

The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket.

I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders?

You may see him pop into the classifieds.

He saved my bacon because he has gaskets for our trucks.

Where is he located?

AngryPirate · 11-27-2023, 06:50 PM

Quote:

Originally Posted by 1960chevypanel

Where is he located?

looking on the website it seems it might be Port Orchard, WA , which I guess isn't close to where the engine might be.

**55-72 GM trucks** · 11-30-2023, 10:53 AM

probably gonna have to do a better job of answering questions if Aotte wants to sell anything on here

**55-72 GM trucks** · 12-09-2023, 09:36 AM

PM sent Aotte - call me

**Backpayne** · 12-09-2023, 10:05 PM

I wish I could find one of these near SWMO.

**aotte1** · 12-10-2023, 11:40 PM

No y pipe, only manifold;
Air cleaner came w/engine, not sure origional.
No transmission.

I have lots going on currently, so may may be slow to respond, thanks for understanding.

10-25-2023, 07:31 PM	#1
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Gmc 351e big block v6 GMC 1966 351E big block V6 out of a suburban that had 4 speed. Dressed pretty much as it was removed. Ran good when removed, suburban was customized reason for removal. It has PS installed and dealer installed AC parts in box (date coded 12/65). Price $500, needs to go, local pick up. Trying to sell whole to some one who needs, other wise will strip for parts. More photos if needed. AC parts are in a box not installed, under dash type unit by Eaton. Still editing Attached Images Last edited by aotte1; 10-25-2023 at 07:43 PM.

10-25-2023, 08:56 PM	#2
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Gmc 351e big block v6 Interested in PS including pulleys if you part out

11-04-2023, 10:23 AM	#3
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 78	Re: Gmc 351e big block v6 So, These are my questions 1) is the Y pipe in tact or cut? 2) is the air cleaner not with it? 3) is the 4 speed still attached and does it come with it or available separately?

11-27-2023, 05:24 PM	#4
AngryPirate Registered User Join Date: Jan 2012 Location: Austin, TX Posts: 543	Re: Gmc 351e big block v6 The gentleman that owns or runs https://www.olsonsgaskets.com/ (pretty much the only place I can find oil pan gaskets for the GMC v6) needs a donor engine to reverse engineer the rear seal gasket. I'm guessing this engine is likely the same internally as the 305 (for his purposes) with the exception of the pistons/cylinders? You may see him pop into the classifieds. He saved my bacon because he has gaskets for our trucks.

11-30-2023, 10:53 AM	#7
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 78	Re: Gmc 351e big block v6 probably gonna have to do a better job of answering questions if Aotte wants to sell anything on here

12-09-2023, 09:36 AM	#8
55-72 GM trucks Junior Member Join Date: Feb 2022 Location: Union Grove Alabama Posts: 78	Re: Gmc 351e big block v6 PM sent Aotte - call me

12-09-2023, 10:05 PM	#9
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 620	Re: Gmc 351e big block v6 I wish I could find one of these near SWMO.

12-10-2023, 11:40 PM	#10
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Gmc 351e big block v6 No y pipe, only manifold; Air cleaner came w/engine, not sure origional. No transmission. I have lots going on currently, so may may be slow to respond, thanks for understanding. Last edited by aotte1; 12-14-2023 at 03:29 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.