The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-22-2009, 01:00 PM   #26
nicolas72gmc
Registered User
 
nicolas72gmc's Avatar
 
Join Date: Aug 2008
Location: Sunny Arizona
Posts: 525
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by Tx Firefighter View Post
That's the same machine I have. It's an old one, bought in the early 90s. Trust me on this, buy a bottle and conversion kit. You will come back here and thank me. If you're good with flux core, you will weld like Jessie James with MIG conversion. It's night and day. With the gas, you can run the little .023 wire which is perfect for sheetmetal.
^^^^ yeah what Kevin Said!!!!
__________________
Nick


"Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson


1968, GMC, SWB, Project
1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components.
1972, C/10, LWB, 350 vortec, th350
nicolas72gmc is offline   Reply With Quote
Old 10-22-2009, 01:23 PM   #27
SpaceForRent
Registered User
 
SpaceForRent's Avatar
 
Join Date: Apr 2009
Location: Wainwright, Alberta, Canada
Posts: 26
Re: Best Buget Welder To Buy?

Does anyone in here use TIG?
It's a great choice for small stuff, low heat input, very accurate.
SpaceForRent is offline   Reply With Quote
Old 10-22-2009, 02:39 PM   #28
massopust13
Registered User
 
Join Date: Jun 2009
Location: WI
Posts: 5
Re: Best Buget Welder To Buy?

This is a very timley topic for me. I purchased a 72 Longhorn this summer and have had very little time to work on it thus far. I just ordered some new rockers and door pieces to replace on saturday and I bought this welder.

http://www.harborfreight.com/cpi/cta...emnumber=55525

Has anyone used this item?

I've been reading some stuff on these boards the last month or so. I will get some photos up soon. I live in Milwaukee, but my truck is currently being stored at my folks' place in Central Wisconsin.
massopust13 is offline   Reply With Quote
Old 10-22-2009, 03:02 PM   #29
Sinister
Between Trucks...
 
Sinister's Avatar
 
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by massopust13 View Post
This is a very timley topic for me. I purchased a 72 Longhorn this summer and have had very little time to work on it thus far. I just ordered some new rockers and door pieces to replace on saturday and I bought this welder.

http://www.harborfreight.com/cpi/cta...emnumber=55525

Has anyone used this item?

I've been reading some stuff on these boards the last month or so. I will get some photos up soon. I live in Milwaukee, but my truck is currently being stored at my folks' place in Central Wisconsin.
It looks like the lowest amperage you can weld at is 58 amps with that welder, which is too hot for sheet metal. You need to be able to get down to 20-25 amps. IIRC
__________________
Beat it to fit,
Paint it to match...

Last edited by Sinister; 10-22-2009 at 03:03 PM.
Sinister is offline   Reply With Quote
Old 10-22-2009, 03:28 PM   #30
mrh33916
Project '67 454
 
mrh33916's Avatar
 
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
Re: Best Buget Welder To Buy?

I priced a Hobart 140 at Northern tool @ 5 years ago then went to the local welding shop where I would be purchasing my gas to see what they had to offer. After talking to the salesman and showing him the price on the Hobart I ended up buying a Millermatic 140 that he gave me a deal on. I paid slightly more for the Miller but the salesman made up most of the difference by giving me the first tank of gas free.
IMO it is better to spend a little more on some things and buy it from the place that can get parts and repair it if there is a problem down the road.
mrh33916 is offline   Reply With Quote
Old 10-22-2009, 05:14 PM   #31
jugernot
Life, Be In It.....
 
jugernot's Avatar
 
Join Date: Oct 2003
Location: Novato, California
Posts: 1,498
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by mrh33916 View Post
I priced a Hobart 140 at Northern tool @ 5 years ago then went to the local welding shop where I would be purchasing my gas to see what they had to offer. After talking to the salesman and showing him the price on the Hobart I ended up buying a Millermatic 140 that he gave me a deal on. I paid slightly more for the Miller but the salesman made up most of the difference by giving me the first tank of gas free.
IMO it is better to spend a little more on some things and buy it from the place that can get parts and repair it if there is a problem down the road.
Well said..............I've learned that it is always better to get the right thing for the right job, or you will spend more time and $$ trying to make something else work.
__________________
Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows"

http://67-72chevytrucks.com/vboard/s...d.php?t=200082
jugernot is offline   Reply With Quote
Old 10-22-2009, 08:09 PM   #32
mclairmo
Registered User
 
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by Sinister View Post
Fluxcore will leave slag/residue which can come back to haunt you when you go to paint.
I would avoid fluxcore. I used Argon to weld patch panels on my 67 Camaro and my 71 Mustang and no rust, no bubbles under the paint or any other problems for over 15 years.
mclairmo is offline   Reply With Quote
Old 10-22-2009, 08:36 PM   #33
culp7
HickTown
 
culp7's Avatar
 
Join Date: Apr 2009
Location: ANDOVER, Kansas
Posts: 355
Re: Best Buget Welder To Buy?

So Miller, Lincoln, or Hobart?
__________________
1993 Ford Mustang Vert w/ 2.3
1969 Chevy C/10 w/350
1968 Chevy C-20 w/250
1976 Dodge Aspen W/ 225
2000 Toyota Tundra w/4.7
1987 Dodge Ram D-100 w/360
255/70-15
___________
(oo)══╬══(oo)
‾‾‾‾‾‾‾‾‾‾‾
culp7 is offline   Reply With Quote
Old 10-22-2009, 08:52 PM   #34
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Best Buget Welder To Buy?

Lincoln and Miller are premium, top of the line machines. It's completely Ford versus Chevy in a MIG welder. Engine drive, Lincoln is king.

Hobart is owned by the same company as Miller, but they are consumer grade. The differences between the two are noticeable if you look closely. For instance, on the Miller MIG, the wire drive is aluminum while it's plastic on the Hobart. Also, the Hobart will have a lower duty cycle than the similar Miller machine.

The consumer line of Lincoln welders is Century. Again, made my the same company, but at lesser quality and specifications.
__________________
I'm on the Instagram- @Gearhead_Kevin
Tx Firefighter is offline   Reply With Quote
Old 10-22-2009, 09:26 PM   #35
culp7
HickTown
 
culp7's Avatar
 
Join Date: Apr 2009
Location: ANDOVER, Kansas
Posts: 355
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by Tx Firefighter View Post
Lincoln and Miller are premium, top of the line machines. It's completely Ford versus Chevy in a MIG welder. Engine drive, Lincoln is king.

Hobart is owned by the same company as Miller, but they are consumer grade. The differences between the two are noticeable if you look closely. For instance, on the Miller MIG, the wire drive is aluminum while it's plastic on the Hobart. Also, the Hobart will have a lower duty cycle than the similar Miller machine.

The consumer line of Lincoln welders is Century. Again, made my the same company, but at lesser quality and specifications.
so i think i will probally go with a lincoln or miller 140... So you would say the lincoln is a beter welder then the miller?
__________________
1993 Ford Mustang Vert w/ 2.3
1969 Chevy C/10 w/350
1968 Chevy C-20 w/250
1976 Dodge Aspen W/ 225
2000 Toyota Tundra w/4.7
1987 Dodge Ram D-100 w/360
255/70-15
___________
(oo)══╬══(oo)
‾‾‾‾‾‾‾‾‾‾‾
culp7 is offline   Reply With Quote
Old 10-22-2009, 09:38 PM   #36
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Best Buget Welder To Buy?

On a mig welder, choose your dealer and support network that treats you best. My big steel jobber is a Miller dealer so I bought a Miller welder recently so I can get needed stuff from them.

Either is great though. I have a 15 year old Lincoln 110 volt Mig and a 15 year Miller 220 volt big Mig. Both are super.

On engine drive welders, Lincoln owns the market. Find any big construction job, bridge, or pipeline and it will be all Lincoln on the job site. It's literally like 99 percent Lincoln engine drive machines.

As you can likely tell, I am a big welder guy. I spend a lot of time on the welding forums and read the books too. I even have the title "welder" on my business card. Some days I do better than others, but it's my passion.
__________________
I'm on the Instagram- @Gearhead_Kevin

Last edited by Tx Firefighter; 10-22-2009 at 09:40 PM.
Tx Firefighter is offline   Reply With Quote
Old 10-22-2009, 09:47 PM   #37
culp7
HickTown
 
culp7's Avatar
 
Join Date: Apr 2009
Location: ANDOVER, Kansas
Posts: 355
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by Tx Firefighter View Post
On a mig welder, choose your dealer and support network that treats you best. My big steel jobber is a Miller dealer so I bought a Miller welder recently so I can get needed stuff from them.

Either is great though. I have a 15 year old Lincoln 110 volt Mig and a 15 year Miller 220 volt big Mig. Both are super.

On engine drive welders, Lincoln owns the market. Find any big construction job, bridge, or pipeline and it will be all Lincoln on the job site. It's literally like 99 percent Lincoln engine drive machines.

As you can likely tell, I am a big welder guy. I spend a lot of time on the welding forums and read the books too. I even have the title "welder" on my business card. Some days I do better than others, but it's my passion.
Thanks Tx Firefighter, you have been a huge help in deciding.. So as a Shopping list I need a:

Welder, Welding Wire, Gas W/ Bottle, Gloves, Helmet, and Gas regulater?

Am I missing anything that I would need to start welding?
__________________
1993 Ford Mustang Vert w/ 2.3
1969 Chevy C/10 w/350
1968 Chevy C-20 w/250
1976 Dodge Aspen W/ 225
2000 Toyota Tundra w/4.7
1987 Dodge Ram D-100 w/360
255/70-15
___________
(oo)══╬══(oo)
‾‾‾‾‾‾‾‾‾‾‾
culp7 is offline   Reply With Quote
Old 10-22-2009, 09:53 PM   #38
BCOWANWHEELS
Registered User
 
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
Re: Best Buget Welder To Buy?

if it was me and you dont do very much needing a welder i,d just hire it done. you can make a mess of things if you dont know what your doing. there more to it that just buying a welder.jmo
bob
__________________
I BELIEVE IN JOHN 3:16
BCOWANWHEELS is offline   Reply With Quote
Old 10-22-2009, 09:59 PM   #39
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by culp7 View Post
Thanks Tx Firefighter, you have been a huge help in deciding.. So as a Shopping list I need a:

Welder, Welding Wire, Gas W/ Bottle, Gloves, Helmet, and Gas regulater?

Am I missing anything that I would need to start welding?
You've got it covered. Depending on which welder you buy, it will come with the regulator and hose. You can usually buy gas bottles real cheap on Craigslist. Just look at the bottle and find the latest hydrostatic date. It will be a year stamped into the bottle near the valve. Make sure it is within the last 10 years. Buy it and take it to a welding house and swap it for a full one.

For gloves, I use normal leather work gloves for most mig work. Some spots and shot beads don't make enough heat to need the big heavy welding gloves. Only if I'm running beads for long lengths do I put on the thick ones.
__________________
I'm on the Instagram- @Gearhead_Kevin
Tx Firefighter is offline   Reply With Quote
Old 10-22-2009, 10:06 PM   #40
Sinister
Between Trucks...
 
Sinister's Avatar
 
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by BCOWANWHEELS View Post
if it was me and you dont do very much needing a welder i,d just hire it done. you can make a mess of things if you dont know what your doing. there more to it that just buying a welder.jmo
bob
Where's the fun in that? Get a welder and practice on scrap until you're ready to weld on your truck. It's fun and you'll have the skill for life.
__________________
Beat it to fit,
Paint it to match...
Sinister is offline   Reply With Quote
Old 10-22-2009, 10:09 PM   #41
culp7
HickTown
 
culp7's Avatar
 
Join Date: Apr 2009
Location: ANDOVER, Kansas
Posts: 355
Re: Best Buget Welder To Buy?

thanks ya'll you guys have been a great help
__________________
1993 Ford Mustang Vert w/ 2.3
1969 Chevy C/10 w/350
1968 Chevy C-20 w/250
1976 Dodge Aspen W/ 225
2000 Toyota Tundra w/4.7
1987 Dodge Ram D-100 w/360
255/70-15
___________
(oo)══╬══(oo)
‾‾‾‾‾‾‾‾‾‾‾
culp7 is offline   Reply With Quote
Old 10-23-2009, 09:35 AM   #42
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,563
Re: Best Buget Welder To Buy?

Now... do yourself a favor... go to your local community junior college and take a couple of welding classes.
Oh yeah, TX firefighter is right on the machines, go Miller or Lincoln.

Last edited by Tom Vogel; 10-23-2009 at 09:36 AM.
Tom Vogel is offline   Reply With Quote
Old 10-23-2009, 10:24 AM   #43
Sinister
Between Trucks...
 
Sinister's Avatar
 
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
Re: Best Buget Welder To Buy?

Here's a good welding site with tutorials and forums.
http://www.mig-welding.co.uk/
__________________
Beat it to fit,
Paint it to match...
Sinister is offline   Reply With Quote
Old 10-23-2009, 10:38 AM   #44
67c-10Texas
Registered User
 
Join Date: Apr 2006
Location: Texas
Posts: 259
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by jugernot View Post
Well said..............I've learned that it is always better to get the right thing for the right job, or you will spend more time and $$ trying to make something else work.
well said. i have been trying to weld on my cab with a 20 year old mig that i spent more time fixing and riggin than welding. i purchased a Miller 140 autoset and it is a heck of a welder for a 110V unit

i like the adjustibility of the milller - it does not have the presets like other welders do. it makes it nice because i am cutting the drip rails off and i am welding on different material thickness. i have found a setting that wont blow through the material yet still penitrate the thicker areas
67c-10Texas is offline   Reply With Quote
Old 10-23-2009, 11:11 AM   #45
mrh33916
Project '67 454
 
mrh33916's Avatar
 
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
Re: Best Buget Welder To Buy?

Also, invest in a auto darkening helmet. I was amazed how much prettier my welds where once I started using one. It will also save you a bunch of grinding time.
mrh33916 is offline   Reply With Quote
Old 10-23-2009, 11:36 AM   #46
0331grunt
Now what??
 
0331grunt's Avatar
 
Join Date: Sep 2009
Location: Webbers Falls, OK
Posts: 579
Re: Best Buget Welder To Buy?

Quote:
Originally Posted by mrh33916 View Post
Also, invest in a auto darkening helmet. I was amazed how much prettier my welds where once I started using one. It will also save you a bunch of grinding time.
100% I went from the flip front to an auto darkening unit and made HUGE improvements!! I have a cheap one from Harbor Freight and it works well so far. May get a nicer one later, but hey, it works for me!
__________________
69 Long Fleet - Project
06 Ram 1ton Cummins 4x4-DD
01 Tahoe- wifes


"The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi

"A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell

my, um, build


USMC OIF Veteran SEMPER FI!
0331grunt is offline   Reply With Quote
Old 10-23-2009, 12:47 PM   #47
mrh33916
Project '67 454
 
mrh33916's Avatar
 
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
Re: Best Buget Welder To Buy?

Mine is also from Harbor Freight, I've had it a couple years, no complaints here,
mrh33916 is offline   Reply With Quote
Old 10-23-2009, 03:48 PM   #48
Ben IV
Registered User
 
Join Date: Dec 2006
Location: Glenpool OK
Posts: 255
Re: Best Buget Welder To Buy?

at home ive got a miller 172 its a 220 machine and is good up to 5/16 I use 0.23 wire for sheetmetal and it does great. Unless they have changed them the small lincon machines have plastic parts in the drive mechanism i havent used one for mabie 5 years so the new ones may be aluminum like the millers. Just know your machines limits my welder is good to 5/16 but even being a certified welder i wouldent weld a frame with it. i see alot of people using 110 machines to do frame work and its scarry. Keep in mind a big machine like a lincon or miller 255 can weld thin guage sheet metal so you dont need two machines.
__________________
70 GMC custom short bed conversion
69 GMC panel truck
Ben IV is offline   Reply With Quote
Old 10-23-2009, 08:00 PM   #49
culp7
HickTown
 
culp7's Avatar
 
Join Date: Apr 2009
Location: ANDOVER, Kansas
Posts: 355
Re: Best Buget Welder To Buy?

Was thinking about buying a lincoln, But does anyone know forsure if the drive componants are plastic or metal?

thanks Bryant
__________________
1993 Ford Mustang Vert w/ 2.3
1969 Chevy C/10 w/350
1968 Chevy C-20 w/250
1976 Dodge Aspen W/ 225
2000 Toyota Tundra w/4.7
1987 Dodge Ram D-100 w/360
255/70-15
___________
(oo)══╬══(oo)
‾‾‾‾‾‾‾‾‾‾‾
culp7 is offline   Reply With Quote
Old 10-23-2009, 08:35 PM   #50
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Best Buget Welder To Buy?

On my 15 year old Lincoln, they are not plastic.
__________________
I'm on the Instagram- @Gearhead_Kevin
Tx Firefighter is offline   Reply With Quote
Reply

Bookmarks

Tags
bodywork, cheap, welders

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com