My 93 CCSSB - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vega_67C10 · 12-14-2010, 12:25 AM

Quote:

Originally Posted by 89chevsj

I'm gonna go do some junkyard shopping for one of thos cupholders.

Good luck, around here there pretty much non-existent in the junk yards. I don't even think LMC sells them.

scotts62 · 12-14-2010, 09:16 AM

I have seen them in a catalog but not sure which, ill look around.

JohnC · 12-14-2010, 09:17 AM

Does ckresto.com have them?

89chevsj · 12-14-2010, 07:57 PM

Quote:

Originally Posted by Vega_67C10

Good luck, around here there pretty much non-existent in the junk yards. I don't even think LMC sells them.

Its whole different game up here, Its hard to find stuff for cars other than these trucks. But darn you you're right every one that i'vefound is broken to bits, or already taken out. I might just have a buddy get the demensions and build me a fiberglass one.

89chevsj · 12-14-2010, 08:02 PM

Quote:

Originally Posted by scotts62

Thanks! Got the new engine and trans in it but slowed way down due to customer paint jobs and other side jobs but the next thing is to lower the back end to match the front and to get the engine running.

youre telling me you put a "new" engine in and i don't run wassup with that?

scotts62 · 12-14-2010, 08:18 PM

Quote:

Originally Posted by 89chevsj

youre telling me you put a "new" engine in and i don't run wassup with that?

Oh so your going to give me a hard time along with everyone else huh?!?!

Nope not yet been busy with everyone else's stuff it seems but its cool it will get there. Why dont you drive on down and give me a hand

JohnC · 12-15-2010, 10:34 AM

We're all in on giving you a hard time man! It's our way of subtle motivation.

scotts62 · 12-15-2010, 02:28 PM

Quote:

Originally Posted by JohnC

We're all in on giving you a hard time man! It's our way of subtle motivation.

ya it works too
Posted via Mobile Device

89chevsj · 12-16-2010, 01:42 AM

Not givin ya a hard time I've been there. Ok I'll drive down, youre paying for gas though. Ill be in Iowa and Illinois somtime in February though.

89chevsj · 12-16-2010, 01:44 AM

Mabey Ill make a pit stop after i study the map to figure out if OK is even in the right direction for me.

54 jimmy · 12-16-2010, 08:18 AM

check out e bay for the cup holders. i just bought one lastnight. maroon one for $39.00 shipped. i could not find any in the junkyard so i bit the bullet and bought this one.

JohnC · 12-17-2010, 12:36 PM

Quote:

Originally Posted by 89chevsj

Mabey Ill make a pit stop after i study the map to figure out if OK is even in the right direction for me.

It would be the scenic route, but it could be on the way.

89chevsj · 12-17-2010, 11:34 PM

Quote:

Originally Posted by JohnC

It would be the scenic route, but it could be on the way.

I gotta come through colorado. It's not too far off. I'm driving a 2005 impala i got gas mileage on my side. we'll see.

89chevsj · 12-18-2010, 12:02 AM

forgot to mention the impala is my gfs car. shes outta town for 3 weeks. so i will be too.

scotts62 · 01-01-2011, 01:24 PM

No update sorry..... got a tool update though

And yes it was a B***H to get out of the truck

mcbassin · 01-01-2011, 02:32 PM

Quote:

Originally Posted by scotts62

No update sorry..... got a tool update though

And yes it was a B***H to get out of the truck

That looks like a nice compressor! Where did you score that bad boy? I need to upgrade mine too. Trying to sandblast with it is slow going.

bjcaldwe · 01-01-2011, 04:17 PM

I understand why you gotta go work. You got a new awesome toy lol.

scotts62 · 01-02-2011, 12:42 AM

Quote:

Originally Posted by mcbassin

That looks like a nice compressor! Where did you score that bad boy? I need to upgrade mine too. Trying to sandblast with it is slow going.

Home Depot 80gal 5hp, i was sanding with a DA earlier and the compresser kicked off a few seconds after i stopped sanding, now thats keeping up

would definitely be nice for sand blasting Mike

Quote:

Originally Posted by bjcaldwe

I understand why you gotta go work. You got a new awesome toy lol.

ya now have to recoup from that ouchie

jwalk · 01-02-2011, 12:58 AM

Looks like a nice compressor!

scotts62 · 01-02-2011, 01:31 AM

Quote:

Originally Posted by jwalk

Looks like a nice compressor!

Ya i like it! Had to take the regulator back and get swapped out with a new one already.. the lady kept telling me to just bring the whole thing back and i could change compressors out but when i said it was 450 lbs and if i have to bring it back you are just going to give me my money back they offered to just swap the regulator

joe231 · 01-02-2011, 02:10 AM

Nice!!

jwalk · 01-02-2011, 02:56 AM

I don't see the big deal....... It's just 450 POUNDS!

Posted via Mobile Device

JohnC · 01-03-2011, 10:43 AM

Looks awesome man. You should have called and I would came over and helped you unload it.

Dub_X · 01-12-2011, 10:35 AM

Quote:

Originally Posted by scotts62

No update sorry..... got a tool update though

And yes it was a B***H to get out of the truck

Nice looking compressor. I bet that thing's as much of a ***** to unload as a liquid oxygen bottle. Them are some heavy sunsa *****es.

scotts62 · 01-12-2011, 01:54 PM

yeah it was definitely fun to unload.. had an appliance dolly with a strap and lawn mower ramps and had a guy helping that weighed 300lb and when we got it to the middle of the ramp it about pulled both of us down.

12-14-2010, 09:16 AM	#702
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build I have seen them in a catalog but not sure which, ill look around. __________________ Scott 93 crew cab build Project 62

12-14-2010, 09:17 AM	#703
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Does ckresto.com have them?

12-15-2010, 10:34 AM	#707
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build We're all in on giving you a hard time man! It's our way of subtle motivation.

12-16-2010, 01:42 AM	#709
89chevsj error 404 Join Date: Oct 2010 Location: soldotna alaska Posts: 1,252	Re: My 93 Crewcab Build Not givin ya a hard time I've been there. Ok I'll drive down, youre paying for gas though. Ill be in Iowa and Illinois somtime in February though. __________________ 89 Chevy swb 350 "SJ" DD turned parts truck. SOLD 90 Chevy ext cab loooongbed. "storm trooper" Rust In Peace. 06 Kia sorento wife's car 06 charger srt8 "lucifer" my toy '12 Kia optima

12-16-2010, 01:44 AM	#710
89chevsj error 404 Join Date: Oct 2010 Location: soldotna alaska Posts: 1,252	Re: My 93 Crewcab Build Mabey Ill make a pit stop after i study the map to figure out if OK is even in the right direction for me. __________________ 89 Chevy swb 350 "SJ" DD turned parts truck. SOLD 90 Chevy ext cab loooongbed. "storm trooper" Rust In Peace. 06 Kia sorento wife's car 06 charger srt8 "lucifer" my toy '12 Kia optima

12-16-2010, 08:18 AM	#711
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: My 93 Crewcab Build check out e bay for the cup holders. i just bought one lastnight. maroon one for $39.00 shipped. i could not find any in the junkyard so i bit the bullet and bought this one. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) Last edited by 54 jimmy; 12-16-2010 at 08:19 AM.

12-18-2010, 12:02 AM	#714
89chevsj error 404 Join Date: Oct 2010 Location: soldotna alaska Posts: 1,252	Re: My 93 Crewcab Build forgot to mention the impala is my gfs car. shes outta town for 3 weeks. so i will be too. __________________ 89 Chevy swb 350 "SJ" DD turned parts truck. SOLD 90 Chevy ext cab loooongbed. "storm trooper" Rust In Peace. 06 Kia sorento wife's car 06 charger srt8 "lucifer" my toy '12 Kia optima

01-01-2011, 01:24 PM	#715
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build No update sorry..... got a tool update though And yes it was a B**H to get out of the truck __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 01-01-2011 at 01:25 PM.*

01-01-2011, 04:17 PM	#717
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My 93 Crewcab Build I understand why you gotta go work. You got a new awesome toy lol. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

01-02-2011, 12:58 AM	#719
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: My 93 Crewcab Build Looks like a nice compressor! __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

01-02-2011, 02:10 AM	#721
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build Nice!! __________________ *CHEVY ONLY*

01-02-2011, 02:56 AM	#722
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: My 93 Crewcab Build I don't see the big deal....... It's just 450 POUNDS! Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

01-03-2011, 10:43 AM	#723
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Looks awesome man. You should have called and I would came over and helped you unload it.

01-12-2011, 01:54 PM	#725
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build yeah it was definitely fun to unload.. had an appliance dolly with a strap and lawn mower ramps and had a guy helping that weighed 300lb and when we got it to the middle of the ramp it about pulled both of us down. __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.