KS Valentines SPECIAL 67-72 PARTS ALOT of them - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-08-2012, 10:55 PM

Dave, only for a BB no SB ones, Sorry, Thanks Randy

72blazr · 02-08-2012, 10:58 PM

Randy, I am interested in the glove box door and ash tray from the eagle truck and also the seat belt retractors from that truck. I have been waiting for a thread on that truck but these holiday specials get a ton of views for you so this is better. Thanks Bobby

68chevyboy · 02-08-2012, 11:33 PM

Hey Randy I'm looking for a driver side door, a 69-72 hood and pass inner fender, Thanks Brad.

teeitup · 02-08-2012, 11:44 PM

tooter, sounds good

Zicc, I'll have pics tomorrow

68chevyboy, Brad, Not sure what i have out there in hoods, will look. If I don't have one now I will have one on a truck thats coming in. I only have one decent drivers door, and it has a dent on inner rear corner, looks like someone backed into something with door open. I'll have to look on inners, I think I have one decent pass side one

Thanks Randy

Crash_OK · 02-08-2012, 11:58 PM

Randy,

How much for the two pieces circled in the picture below shipped to 73012.

Thanks

Crash_OK · 02-08-2012, 11:59 PM

Quote:

Originally Posted by Crash_OK

Randy,

How much for the two pieces circled in the picture below shipped to 73012.

Thanks

Sorry didn't add the picture

Crash_OK · 02-09-2012, 09:58 AM

Quote:

Originally Posted by Crash_OK

Sorry didn't add the picture

Randy,

How much for the whole crossmemeber? I could use the bottom to add a skid plate to mine... Shipped to 73012..

Thanks

68chevyboy · 02-08-2012, 11:59 PM

How much for the driver side door ? The inner fenders can have some rust price is more the issue.

teeitup · 02-09-2012, 12:03 AM

Crash OK, Mark, would rather not split them apart right now, sorry

68chevyboy, Brad, $30 for door, no wing window in it has a big ole mirror on it, came off a 1 ton truck. If I have a pass inner with a little rust probably $20. Hood would be $20 too.

Thanks Randy

Crash_OK · 02-09-2012, 12:05 AM

Quote:

Originally Posted by teeitup

Crash OK, Mark, would rather not split them apart right now, sorry

Thanks Randy

No problem...let me know if you change your mind...

Thanks

68chevyboy · 02-09-2012, 12:08 AM

Sounds great Randy I'll be in Kc next week for classes I'll get with you sometime next week to pick them up Thanks Brad.

teeitup · 02-09-2012, 12:13 AM

Mark, sure will, I may actually think on that some, I'm needing a 2nd crossmember for my blazer to put a skid plate on and the lower piece would be the right one for me. I'll let you know

Brad, I won't have a hood here by then. I'll get pics and post them tomorrow night

Thanks Randy

jervin · 05-15-2012, 11:47 PM

Hello Randy, would you have a passenger's motor mount for a 292? I know they are hard to find. Do you know if the the "knee bracket" or outer metal shell part of the mount is "292 specific" for the passenger side like the motor stand (perch) is? Also I need the inside metal door panel and a radio delete cover plate for my 1967 pickup if you have them. Thanks, jervin

teeitup · 05-16-2012, 07:35 AM

jervin, I don't have any 292 stuff right now, and sorry not sure about the knee bracket. I may have a 67 door panel still out there, no deletes right now

Thanks Randy

Meatman · 02-09-2012, 12:20 AM

Is the orche tailgate sold? What kind of shape is it in?

teeitup · 02-09-2012, 12:25 AM

No not sold Cory, its in good shape, couple dings, no rust $225 picked up. Thanks Randy

teeitup · 02-09-2012, 09:51 AM

Meatman, Cory, no prob

kingsolver72, Scott, its a good drivers side $60 for it

Madness, Brett, I'll get pics fo them, one is a SUN

1970chevychamp, I have one guy ahead of you on columns, I will get pics.

Sanford66, Joseph, no short shifter handles. I have a good seat but I have 2 guys ahead of you on it, $80 for it

Dieselwrencher, Ryan, I heard he is a nice guy!! Tool box door and carb is yours. I'll check brake pedals. Cab is pretty good but no title. $200 for it

krifenbery, Kyle, your 2nd on bumpers. I have a couple steering wheels, will get pics. No good headliner trim. I'll check on saddle belts

tanman, Tony, $12 for a pair of side markers and yes I have a set of cab divider chrome $13 for a set of them and I can box it with chrome. I can put the side markers with your other stuff, I didn't get it all boxed last night but will tonight

rlk, I have 2 intakes one is weind and one is a holley

71sleeper, Tom, I'll get pics of that stuff. I have a couple guys ahead of you on steering wheels. 71-72 bumper lights $13 for a pair. black belt with retractor I will look and see then price

D.Passmore, David, $15 for a pair of valve covers. Are you talking about defrost vents, if so $10 for a pair of them if I have any blue ones. I will have a aux tank setup once I start parting this other truck

hjewell2, $225 plus shipping. has a couple small dents, no rust.

29od1, David, I think I only have one side of those, I will check condition

Thanks Randy

teeitup · 02-09-2012, 09:53 AM

Guys I'll try to get pics today and get them posted tonight, if your wanting the part you asked about please let me know after I get better pics posted and I will get you shipping charges. Thansk Randy

teeitup · 02-09-2012, 09:54 AM

Also I have a 72 cheyenne super BB AC tilt and tach truck bought that I will be getting in a week or so. And am trying to make a deal work on a 72 GMC Sierra BB AC truck with bucket seats. Thanks Randy

**D.PASSMORE** · 02-09-2012, 10:38 AM

Quote:

Originally Posted by teeitup

D.Passmore, David, $15 for a pair of valve covers. Are you talking about defrost vents, if so $10 for a pair of them if I have any blue ones. I will have a aux tank setup once I start parting this other truck.

Take the valve covers, yep, blue defrost vents, please no broken clips. When you get the complete aux tank setup removed. LMK and we can look at everything. Thx- DP

**Dieselwrencher** · 02-09-2012, 03:05 PM

Quote:

Originally Posted by teeitup

Dieselwrencher, Ryan, I heard he is a nice guy!! Tool box door and carb is yours. I'll check brake pedals. Cab is pretty good but no title. $200 for it
Thanks Randy

Randy, I'll think about the cab. If you have any extra aux fuel tank valves, switches or anything like that, I could use that too. Thanks Ryan.

kingsolver72 · 02-09-2012, 12:42 AM

Hey Randy, what is the condition of the ochre fender and how much?
Posted via Mobile Device

1970ChevyChamp · 02-09-2012, 02:00 AM

Randy, how much for the best floor shift steering column you have. Not picky about paint, just want it to work and not be junk. I'm only an hour from you so I could probably make the drive to pick it up. Thanks

MadnessBigBlock · 02-09-2012, 01:57 AM

Randy in post 288888888 picture 4 there is a tach in the back right of the photo what kind of tach is that? I will take pending condition and price!
Posted via Mobile Device

sanford66 · 02-09-2012, 02:00 AM

Have you got a good short shift lever for a auto steering column, i believe they came on the van columns. Also do you have a decent bench seat with good bottom cushion foam and good seat tracks? I don't care what the seatcover looks like just looking for one with good cushion foam to rebuild. I noticed in one of the pics there was what looked like a 71-72 white bench seat, what kind of shape is it in? Thanks, Joseph

02-08-2012, 10:55 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Dave, only for a BB no SB ones, Sorry, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2012, 10:58 PM	#2
72blazr Registered User Join Date: Nov 2011 Location: Houston Texas Posts: 120	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Randy, I am interested in the glove box door and ash tray from the eagle truck and also the seat belt retractors from that truck. I have been waiting for a thread on that truck but these holiday specials get a ton of views for you so this is better. Thanks Bobby

02-08-2012, 11:33 PM	#3
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Hey Randy I'm looking for a driver side door, a 69-72 hood and pass inner fender, Thanks Brad.

02-08-2012, 11:44 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them tooter, sounds good Zicc, I'll have pics tomorrow 68chevyboy, Brad, Not sure what i have out there in hoods, will look. If I don't have one now I will have one on a truck thats coming in. I only have one decent drivers door, and it has a dent on inner rear corner, looks like someone backed into something with door open. I'll have to look on inners, I think I have one decent pass side one Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2012, 11:58 PM	#5
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Randy, How much for the two pieces circled in the picture below shipped to 73012. Thanks __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

02-08-2012, 11:59 PM	#8
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Valentines SPECIAL 67-72 PARTS ALOT of them How much for the driver side door ? The inner fenders can have some rust price is more the issue.

02-09-2012, 12:03 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Crash OK, Mark, would rather not split them apart right now, sorry 68chevyboy, Brad, $30 for door, no wing window in it has a big ole mirror on it, came off a 1 ton truck. If I have a pass inner with a little rust probably $20. Hood would be $20 too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-09-2012, 12:08 AM	#11
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Sounds great Randy I'll be in Kc next week for classes I'll get with you sometime next week to pick them up Thanks Brad.

02-09-2012, 12:13 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Mark, sure will, I may actually think on that some, I'm needing a 2nd crossmember for my blazer to put a skid plate on and the lower piece would be the right one for me. I'll let you know Brad, I won't have a hood here by then. I'll get pics and post them tomorrow night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2012, 11:47 PM	#13
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Hello Randy, would you have a passenger's motor mount for a 292? I know they are hard to find. Do you know if the the "knee bracket" or outer metal shell part of the mount is "292 specific" for the passenger side like the motor stand (perch) is? Also I need the inside metal door panel and a radio delete cover plate for my 1967 pickup if you have them. Thanks, jervin

05-16-2012, 07:35 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them jervin, I don't have any 292 stuff right now, and sorry not sure about the knee bracket. I may have a 67 door panel still out there, no deletes right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-09-2012, 12:20 AM	#15
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Is the orche tailgate sold? What kind of shape is it in? __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

02-09-2012, 12:25 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them No not sold Cory, its in good shape, couple dings, no rust $225 picked up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-09-2012, 09:51 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Meatman, Cory, no prob kingsolver72, Scott, its a good drivers side $60 for it Madness, Brett, I'll get pics fo them, one is a SUN 1970chevychamp, I have one guy ahead of you on columns, I will get pics. Sanford66, Joseph, no short shifter handles. I have a good seat but I have 2 guys ahead of you on it, $80 for it Dieselwrencher, Ryan, I heard he is a nice guy!! Tool box door and carb is yours. I'll check brake pedals. Cab is pretty good but no title. $200 for it krifenbery, Kyle, your 2nd on bumpers. I have a couple steering wheels, will get pics. No good headliner trim. I'll check on saddle belts tanman, Tony, $12 for a pair of side markers and yes I have a set of cab divider chrome $13 for a set of them and I can box it with chrome. I can put the side markers with your other stuff, I didn't get it all boxed last night but will tonight rlk, I have 2 intakes one is weind and one is a holley 71sleeper, Tom, I'll get pics of that stuff. I have a couple guys ahead of you on steering wheels. 71-72 bumper lights $13 for a pair. black belt with retractor I will look and see then price D.Passmore, David, $15 for a pair of valve covers. Are you talking about defrost vents, if so $10 for a pair of them if I have any blue ones. I will have a aux tank setup once I start parting this other truck hjewell2, $225 plus shipping. has a couple small dents, no rust. 29od1, David, I think I only have one side of those, I will check condition Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-09-2012, 09:53 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Guys I'll try to get pics today and get them posted tonight, if your wanting the part you asked about please let me know after I get better pics posted and I will get you shipping charges. Thansk Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-09-2012, 09:54 AM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Also I have a 72 cheyenne super BB AC tilt and tach truck bought that I will be getting in a week or so. And am trying to make a deal work on a 72 GMC Sierra BB AC truck with bucket seats. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-09-2012, 12:42 AM	#22
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,201	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Hey Randy, what is the condition of the ochre fender and how much? Posted via Mobile Device

02-09-2012, 02:00 AM	#23
1970ChevyChamp Registered User Join Date: Dec 2011 Location: Madison, Kansas Posts: 102	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Randy, how much for the best floor shift steering column you have. Not picky about paint, just want it to work and not be junk. I'm only an hour from you so I could probably make the drive to pick it up. Thanks

02-09-2012, 01:57 AM	#24
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Randy in post 288888888 picture 4 there is a tach in the back right of the photo what kind of tach is that? I will take pending condition and price! Posted via Mobile Device

02-09-2012, 02:00 AM	#25
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: Valentines SPECIAL 67-72 PARTS ALOT of them Have you got a good short shift lever for a auto steering column, i believe they came on the van columns. Also do you have a decent bench seat with good bottom cushion foam and good seat tracks? I don't care what the seatcover looks like just looking for one with good cushion foam to rebuild. I noticed in one of the pics there was what looked like a 71-72 white bench seat, what kind of shape is it in? Thanks, Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

Register or Log In To remove these advertisements.