KS Parting a 72 C20 very original truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-09-2014, 11:33 PM

Ask questions in thread
I'm hopefully going to start parting this Fri night some and then this weekend if I have time, don't be in a big hurry, I have a real job, wife and kids
Pay pal with fees or money orders
I ship fed ex and USPS
outer grill $100, no ship 29od1 has first shot at it
PS pump/brackets, motor pullies, alt brackets are SOLD already
booster setup $80 shipped
AT linkage $38 shipped
column $75 shipped
shroud $75 shipped
sway bar $75 shipped
front fenders have some small rust, I think rad support is good. Pass door is decent. Cab has all low rust. Driver door is bad. Bedsides are that bad, bedfloor is wavy.
see anything else and I will get pics and price

teeitup · 04-09-2014, 11:34 PM

53

teeitup · 04-09-2014, 11:35 PM

58

teeitup · 04-09-2014, 11:35 PM

63

BoneSaw · 04-10-2014, 12:55 AM

Front bumper- Price? Condition?
I'll take the outer grill if 29od1 passes

swamp rat · 04-10-2014, 02:47 AM

Do i see an original cig lighter in that truck, Just the part ya pull out to light the cig.

Wires out of the seat cover??

72ChevySS · 04-10-2014, 05:22 AM

Price for ash tray with slider and complete brake pedal and accelerator pedal set up with bracket to 87124? Thank you.

**uncle** · 04-10-2014, 05:21 AM

Carb with choke assembly and bolts to 30094?

1stchevy · 04-10-2014, 05:30 AM

I'll take the sway bar

**D.PASSMORE** · 04-10-2014, 06:46 AM

Just air cleaner with OE rod and wing nut that mounts in Carb

yfs200p · 04-10-2014, 07:14 AM

I need a 71/72 Driver side parking light housing, a tail light housing with screws, and two reverse light housings.

If these are all in good usable condition not real rusty can i have a price on them shipped to 11937 please?

**29od1** · 04-10-2014, 07:44 AM

Hi Randy,
I'll take the grill and headlight bezels.
Thanks,
David

teeitup · 04-10-2014, 08:01 AM

Bonesaw, front bumper is nice, $60 plus shipping without lights

Swamp rat, Mike, for male part of lighter another $10 and I can put it in with other parts

Uncle, $45 shipped for carb and choke

72chevyss, slider is welded in on ashtray, I cut out whole center radio section, $25 for all with ash tray. Brake pedal is $20. gas pedal, with throttle cable and carb bracket is $35, all plus shipping

1stchevy, sway bar is yours, it will probably need new rubber bushings

David Passmore, $25 plus shipping for air cleaner and rod and wing nut

yfs200p, turn signal housing is $15, are you needing both tail light housings and both reverse light housings, if so $20 for all 4, and shipping

David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics

Thanks Randy

clemsonteg · 04-10-2014, 08:15 AM

Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

jaybatta · 04-10-2014, 09:15 AM

Quote:

Originally Posted by clemsonteg

Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

I'd like to get in line behind clemsonteg for the steering column and wheel, and shift linkage. I am also more concerned with mechanics than anything. Price shipped to 59823. Thanks

72ChevySS · 04-10-2014, 10:16 AM

I'll pass on the ash tray. What will shipping for the brake pedal and accelerator pedal with bracket be to 87124?

**Cash3481** · 04-10-2014, 10:26 AM

Randy,
Nice find...
Ill take the turnbuckle thing on the rear bumper if youll throw it in my box of stuff for a few dollars extra.
I see your taking Paypal again, can I send you the money that way? If not Ill get it mailed today. Been busy lately...

Mike

**D.PASSMORE** · 04-10-2014, 11:06 AM

Quote:

Originally Posted by teeitup

David Passmore, $25 plus shipping for air cleaner and rod and wing nut

David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics

Thanks Randy

Roger!

swamp rat · 04-11-2014, 09:29 PM

Quote:

Originally Posted by teeitup

Swamp rat, Mike, for male part of lighter another $10 and I can put it in with other parts

Thanks Randy

I'll do it when i get home tonight (thats just after midnight my time) sorry for the delay in the reply, i missed it.

teeitup · 04-11-2014, 10:01 PM

Jocko, I will watch for you some

Swamp Rat, I'll get it in the box

Thanks Randy

teeitup · 04-11-2014, 10:02 PM

Guys I didn't get much done on it tonight, I had customers most the night. I will try to get some parting done tomorrow and some pics. Thanks Randy

teeitup · 04-11-2014, 10:33 PM

Clemsonchevy, sorry no parchment arm rests. $22 shipped for these green ones, they are good, just need cleaned up

BoneSaw · 04-10-2014, 09:10 AM

I'll take the front bumper. 80401.
Im still in for the outer grill 29od1 passes.

**uncle** · 04-10-2014, 09:11 AM

I'll take carb. Pm payment info.

1967chevytruckguy · 04-10-2014, 10:01 AM

take 25 shipped for the air cleaner ??

04-09-2014, 11:33 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Parting a 72 C20 very original truck Ask questions in thread I'm hopefully going to start parting this Fri night some and then this weekend if I have time, don't be in a big hurry, I have a real job, wife and kids Pay pal with fees or money orders I ship fed ex and USPS outer grill $100, no ship 29od1 has first shot at it PS pump/brackets, motor pullies, alt brackets are SOLD already booster setup $80 shipped AT linkage $38 shipped column $75 shipped shroud $75 shipped sway bar $75 shipped front fenders have some small rust, I think rad support is good. Pass door is decent. Cab has all low rust. Driver door is bad. Bedsides are that bad, bedfloor is wavy. see anything else and I will get pics and price Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-09-2014 at 11:51 PM.

04-09-2014, 11:34 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 53 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2014, 11:35 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 58 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2014, 11:35 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 63 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2014, 12:55 AM	#5
BoneSaw Registered User Join Date: Apr 2014 Location: golden, CO Posts: 55	Re: Parting a 72 C20 very original truck Front bumper- Price? Condition? I'll take the outer grill if 29od1 passes __________________ Paul "Mike" Tzareff

04-10-2014, 02:47 AM	#6
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 72 C20 very original truck Do i see an original cig lighter in that truck, Just the part ya pull out to light the cig. Wires out of the seat cover?? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-10-2014, 05:22 AM	#7
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting a 72 C20 very original truck Price for ash tray with slider and complete brake pedal and accelerator pedal set up with bracket to 87124? Thank you. __________________ Jonathan

04-10-2014, 05:21 AM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Parting a 72 C20 very original truck Carb with choke assembly and bolts to 30094?

04-10-2014, 05:30 AM	#9
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Parting a 72 C20 very original truck I'll take the sway bar

04-10-2014, 06:46 AM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: Parting a 72 C20 very original truck Just air cleaner with OE rod and wing nut that mounts in Carb __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

04-10-2014, 07:14 AM	#11
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: Parting a 72 C20 very original truck I need a 71/72 Driver side parking light housing, a tail light housing with screws, and two reverse light housings. If these are all in good usable condition not real rusty can i have a price on them shipped to 11937 please? __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

04-10-2014, 07:44 AM	#12
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Parting a 72 C20 very original truck Hi Randy, I'll take the grill and headlight bezels. Thanks, David

04-10-2014, 08:01 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck Bonesaw, front bumper is nice, $60 plus shipping without lights Swamp rat, Mike, for male part of lighter another $10 and I can put it in with other parts Uncle, $45 shipped for carb and choke 72chevyss, slider is welded in on ashtray, I cut out whole center radio section, $25 for all with ash tray. Brake pedal is $20. gas pedal, with throttle cable and carb bracket is $35, all plus shipping 1stchevy, sway bar is yours, it will probably need new rubber bushings David Passmore, $25 plus shipping for air cleaner and rod and wing nut yfs200p, turn signal housing is $15, are you needing both tail light housings and both reverse light housings, if so $20 for all 4, and shipping David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2014, 08:15 AM	#14
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: Parting a 72 C20 very original truck Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

04-10-2014, 10:16 AM	#16
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting a 72 C20 very original truck I'll pass on the ash tray. What will shipping for the brake pedal and accelerator pedal with bracket be to 87124? __________________ Jonathan



Register or Log In To remove these advertisements.

04-10-2014, 10:26 AM	#17
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 72 C20 very original truck Randy, Nice find... Ill take the turnbuckle thing on the rear bumper if youll throw it in my box of stuff for a few dollars extra. I see your taking Paypal again, can I send you the money that way? If not Ill get it mailed today. Been busy lately... Mike

04-11-2014, 10:01 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck Jocko, I will watch for you some Swamp Rat, I'll get it in the box Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2014, 10:02 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck Guys I didn't get much done on it tonight, I had customers most the night. I will try to get some parting done tomorrow and some pics. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2014, 10:33 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck Clemsonchevy, sorry no parchment arm rests. $22 shipped for these green ones, they are good, just need cleaned up __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2014, 09:10 AM	#23
BoneSaw Registered User Join Date: Apr 2014 Location: golden, CO Posts: 55	Re: Parting a 72 C20 very original truck I'll take the front bumper. 80401. Im still in for the outer grill 29od1 passes. __________________ Paul "Mike" Tzareff

04-10-2014, 09:11 AM	#24
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Parting a 72 C20 very original truck I'll take carb. Pm payment info.

04-10-2014, 10:01 AM	#25
1967chevytruckguy Registered User Join Date: Nov 2012 Location: Auburn alabama Posts: 155	Re: Parting a 72 C20 very original truck take 25 shipped for the air cleaner ??

Register or Log In To remove these advertisements.