KS parting 72 chevy highlander C10 with AC and tilt

[pimpston65]

cool so $50 plus shipping should cover me? also the rad cap is it an older one? RC6 13# or newer. i think i still have your PP...

[pimpston65]

btw i hope you understand i am just a parts junkie and dont wanna interrupt family time!!! which truly comes first.

[EARNHARDT#3]

Originally Posted by teeitup

Earnhardt#3, I have quite a few sets of those $24 shipped a set, I'll go through and find best ones, they may have a small ding in them but I will get you the best

If you can send the set with the 12 (I'm pretty sure there's 12) clips as well I'll do $24 shipped.

[WhiteWhale]

interested in crank and water pump pullets
thanks

[teeitup]

Sorry these are sold, Thanks

[DeadheadNM]

I'll take visors, pass on the door panels (have similar condition set), and LMK re: harness when poss. Thanks Randy!

[Justintime67]

I'll take all three. Shipping will be to 92392

[WCH]

WCH, Curby, I have AC setups minus brackets for $200. I have a aftermarket blue dash pad or this black one, your 2nd on it for $30. No parchment dash pads were made that I know of. I'll have these parchment seat belts for $40. Your 2nd on these visors $25 and door panels $75. No rear bumper brackets. I may have a mirror bracket, not sure. no antennas. All prices picked up

Randy,

I will take an AC set up, and a drivers side mirror bracket if you find one. Looking for a nice set of blue belts, dash pad, and door panels for 72 if you come across them. I can come up and get the stuff later this week, or next weekend if you are available.

Thanks, Curby

[teeitup]

burb71, Steve, I should have all that out there, I will look today. Getting the plastic piece that goes into inner firewall is hard to do they break most the time

Justintime67, Justin, I'll try to get a quote today

Dirts72, pad is yours I will try to get it out tonight and get you a quote

Jake1971, Paul, AC dash is $140 shipped. Patch out of firewall is $30 and can get shipped with the $200 AC parts. I'll have to get a firm shipping price on those. I'll get pics of everything and the blue dash pad. Best way to remove old dash is cut it out under the dash pad along slits and 3 bolts on both sides. Then weld the AC dash back in

JJorgensen52, no problem

Pimpston65, Winston, sounds good, I'll try to get shroud off this coming weekend. Thanks for understanding!!!!!!!!!!!!!!!!!!!

Earnhardt#3, I'll have to see if I have any good clips, most guys buy new clips

WCH, Curby, I will get the AC together everything and look for a mirror bracket. This weekend should work

Thanks Randy

[EARNHARDT#3]

Originally Posted by teeitup

Earnhardt#3, I'll have to see if I have any good clips, most guys buy new clips

Yeah that sounds like the way to go now that you mention it. I will take a good set of of the divider trim. Left piece, right piece, small center piece. Please just snap a picture of them and post it up and then i'll send PayPal.

Thank you.

[Jake1971]

Originally Posted by teeitup

Jake1971, Paul, AC dash is $140 shipped. Patch out of firewall is $30 and can get shipped with the $200 AC parts. I'll have to get a firm shipping price on those. I'll get pics of everything and the blue dash pad. Best way to remove old dash is cut it out under the dash pad along slits and 3 bolts on both sides. Then weld the AC dash back in. Thanks Randy

Hey Randy, I fully agree with Pimpston65. Stay cool, enjoy Family time. No rush for my pile of goodies. Like DeadheadNM (Pete) did for his build, I am still gathering parts for mine. Seems I have been gathering parts since we could still buy them new from the local Dealerships Thank you for the dash cut info, good to know.

[teeitup]

THANKS Winston and Paul, I appreciate your understanding!!!!!!

Guys I got a few more parts off this red one today from 2:30-4:30 in at 97 degrees, then went to ball practice and now its lightening so no more parting tonight. I will try to get quotes for you guys as I get the parts off. I have most the motor parted, I will start on inside tomorrow after work. I have to try to get some parts boxed and shipped Wed night also.

Burb71, Steve, the pic is all the stuff you asked about. On the flapper, one is flaking on the side and one has a chip, these are the best 2 I have right now, your choice

[teeitup]

Paul, here is the aftermarket dash pad, it has a couple stains, I think will clean up, one of the studs in back is gone

[ujsf01]

Hey Randy, not really concerned if the washer pump is functional or not, just need a properly operating two speed wiper motor. Let me know.

[sduckworth13]

Randy, I'm looking to repair the firewall on the passenger side half. Do you have any cabs that I could get a passenger side half from. The previous owner decided to make his own a/c unit out of antifreeze jugs and whatever else I have know clue but they chopped the firewall up to get it to fit.

[teeitup]

ujsf01, I have one still in a truck I can check

Earnhardt#3, pic tonight

Scott, I will have a AC cab I can cut it out of. I have one non ac cab out there too

Frank, sounds good, I'll let you know when I get them off

Thanks Randy

[teeitup]

WCH, Curby, here is your parts for $200.

Jake1971, Paul, this is what you'd get plus AC dash and firewall patch. I have to part the green 72 C20 to get your parts off

[teeitup]

few parts taken off, good engine harness, good front light/alt harness, good original GM set of battery cables, dual horn wire is in the pic too

[teeitup]

and a few more

[teeitup]

Dirts72, Derrick, they are for sale, $12 and I can pack them with pad.

low&slow, sorry dash pad is sold. I only have good pass arm rests and no good white belts right now

uaengineer, belts are $54 shipped, the $40 I priced to WCH was for him picking them up. The driver male plastic has a crack on bottom

Thanks Randy

[sduckworth13]

Randy, I can come pick it up this weekend if it's ok.

[teeitup]

Scott, are you needing the whole half or just the AC section?

[teeitup]

Scott, I will try to get it cut off this week. I'll be around Sat most the day and Sun morning

Willie, sorry keeping it with gate

boraxman, sorry fender and bed chrome was sold with those pieces

ujsf01, the one in the green truck works, its a little faster on high

Thanks Randy

[sduckworth13]

Originally Posted by teeitup

Scott, I will try to get it cut off this week. I'll be around Sat most the day and Sun morning

Willie, sorry keeping it with gate

boraxman, sorry fender and bed chrome was sold with those pieces

ujsf01, the one in the green truck works, its a little faster on high

Thanks Randy

Ok, sounds good. Thank you Randy.

[teeitup]

rusted'72, I'll have quote tomorrow evening. I'll post pic of parts in a bit. Heat shield and riser, they go into the air cleaner $60 for pair, heat shield is in real good shape

DD1, shroud and radiator are bad, sorry

Scott, sounds good

Thanks Randy