Little feet kicking under the dash… - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**sloGMC** · 10-10-2022, 09:39 AM

Quote:

Originally Posted by EdwardSams

Thanks for posting - I appreciate it.

That is what I’ve been thinking would keep things contained and shielded. Thx again.

No problem. Sorry it took a few weeks but work has been getting most of my time. I'll try to snap a photo of it removed because there are a few more bends that need to be made, and a cutout in the middle, to get it to fit right.

Warrens69GMC · 10-09-2022, 11:06 PM

looks good

**sloGMC** · 10-15-2022, 11:14 PM

Just to tie a bow in this... if you're gonna mount the filler panel on the inside you gotta make some extra bends to clear a lip on the inside of the dash. Then some of the top/middle of the filler panel has to be removed to clear the hvac panel. So it ends up being a bit of work to do it that way.
Alternatively, you can just screw it to the dash panel from the outside and avoid the extra bends and interference. It would probably be just as inconspicuous.

10-09-2022, 11:06 PM	#2
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: Little feet kicking under the dash… looks good

10-15-2022, 11:14 PM	#3
sloGMC Active Member Join Date: Jun 2018 Location: Central Coast, CA Posts: 116	Re: Little feet kicking under the dash… Just to tie a bow in this... if you're gonna mount the filler panel on the inside you gotta make some extra bends to clear a lip on the inside of the dash. Then some of the top/middle of the filler panel has to be removed to clear the hvac panel. So it ends up being a bit of work to do it that way. Alternatively, you can just screw it to the dash panel from the outside and avoid the extra bends and interference. It would probably be just as inconspicuous. Attached Images __________________ 1971 Pontiac Firebird 1971 GMC C2500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.