CA Parting 84 K10 Long Bed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 04-26-2011, 11:29 PM

Thanks! I will ship out Fri.

76stepsidechevy · 05-01-2011, 08:44 PM

Quote:

Originally Posted by KrazyRay

I use that cross member with the trailer, however, I might have one in my parts stash. If I do, it will be $25 plus shipping.
Thanks,
Ray

Sounds good to me.

johnny339 · 05-02-2011, 06:48 PM

Got the seat belts today thanks again Ray

**old Rusty C10** · 05-02-2011, 09:20 PM

ray i can use the glove box if it has no cracks or seperation on the hinges... also on a dual tank long bed with large tanks ..how much for the fuel fill necks and the rubber hoses to the tanks? all shoipped to 11215 please

KrazyRay · 05-02-2011, 11:46 PM

Bob, I have a couple sets of tanks...I will check for the best necks.
Thanks,
Ray

**old Rusty C10** · 05-03-2011, 09:10 AM

Ray i ask that you PM me just that youve replied here nothing else if i dont get back to you.... we have a couple of things going on here and things do slip my mind when it comes to rechecking posts

madcow75 · 05-03-2011, 09:33 AM

How much for dach bezel?

KrazyRay · 05-03-2011, 10:26 AM

Its $25, but shipping to Canada will probably be another $25.
Thanks,
Ray

76stepsidechevy · 05-04-2011, 06:54 PM

Quote:

Originally Posted by KrazyRay

I use that cross member with the trailer, however, I might have one in my parts stash. If I do, it will be $25 plus shipping.
Thanks,
Ray

Did you happen to find one?

KrazyRay · 05-04-2011, 08:28 PM

Quote:

Originally Posted by 76stepsidechevy

Did you happen to find one?

I looked today, but the only one I have is for a 73 Blazer and it does not have the provisions for the cab mounts.
Thanks,
Ray

**old Rusty C10** · 05-04-2011, 09:00 PM

I definately want the glovebox and the two metal filler tubes shipped to 11215 in Brooklyn NY 11215 and signature required

The Reca · 05-08-2011, 06:51 PM

are you still parting out this truck?

KrazyRay · 05-08-2011, 07:30 PM

Quote:

Originally Posted by The Reca

are you still parting out this truck?

The back end has been trailerized and the cab has been stripped and sent to the scrap yard. I have a bunch of loose parts from this one and several others.

KrazyRay · 05-08-2011, 11:14 PM

Bob, Here's pics of the 75 Blazer glove box...I will pull the fillers Mon. and get shipping quote.

Pic of 80's bezel

Thanks,
Ray

The Reca · 05-09-2011, 02:14 AM

Quote:

Originally Posted by KrazyRay

The back end has been trailerized and the cab has been stripped and sent to the scrap yard. I have a bunch of loose parts from this one and several others.

Any chance you have the windshield wiper harness still?

KrazyRay · 05-09-2011, 02:52 PM

The wiring on this truck was junk. I might have one from a 77-78 cab, but I think its different.
Thanks,
Ray

**old Rusty C10** · 05-17-2011, 09:19 PM

http://67-72chevytrucks.com/vboard/s...72#post4686172
in case anyone wants to know how Ray is to do business with

KrazyRay · 05-20-2011, 01:06 AM

Bob, Thanks for the kind words!

76stepsidechevy · 06-14-2011, 08:27 PM

Quote:

Originally Posted by KrazyRay

I looked today, but the only one I have is for a 73 Blazer and it does not have the provisions for the cab mounts.
Thanks,
Ray

Can it be modified maybe? My crossmember itself is ok its the two smaller brackets that are rivited to it that are gone.

KrazyRay · 06-14-2011, 08:36 PM

I will take a look on Fri.
Thanks,
Ray

KrazyRay · 06-18-2011, 02:22 PM

I have nothing compatible right now. Sorry.

Thanks,
Ray

local13hutch · 05-13-2012, 05:32 AM

I need a 91 or earlier 4x4 crew-cab bare frame im in orange county cal. can you help me ,every time I find one its half way across the country...Thank you for any help....

mainermikeyd · 05-14-2012, 11:32 AM

Any way of getting the wiring with the fuel crossover lines???
Posted via Mobile Device

Jonboy · 05-14-2012, 01:01 PM

Ray, do you have a good radio opening (the metal section) on the dash? I need enough to put a factory radio in my '74. A set of erly knobs and a rear brace for a radio would be sweet as well, shipped to 75080.

owner 84 · 05-14-2012, 06:15 PM

could you post the car's picture so everything will be clear

04-26-2011, 11:29 PM	#26
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed Thanks! I will ship out Fri.

05-02-2011, 06:48 PM	#28
johnny339 Registered User Join Date: Apr 2011 Location: blacksburg, south carolina Posts: 29	Re: Parting 84 K10 Long Bed Got the seat belts today thanks again Ray

05-02-2011, 09:20 PM	#29
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,270	Re: Parting 84 K10 Long Bed ray i can use the glove box if it has no cracks or seperation on the hinges... also on a dual tank long bed with large tanks ..how much for the fuel fill necks and the rubber hoses to the tanks? all shoipped to 11215 please __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-02-2011, 11:46 PM	#30
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed Bob, I have a couple sets of tanks...I will check for the best necks. Thanks, Ray

05-03-2011, 09:10 AM	#31
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,270	Re: Parting 84 K10 Long Bed Ray i ask that you PM me just that youve replied here nothing else if i dont get back to you.... we have a couple of things going on here and things do slip my mind when it comes to rechecking posts __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-03-2011, 09:33 AM	#32
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting 84 K10 Long Bed How much for dach bezel?

05-03-2011, 10:26 AM	#33
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed Its $25, but shipping to Canada will probably be another $25. Thanks, Ray

05-04-2011, 09:00 PM	#36
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,270	Re: Parting 84 K10 Long Bed I definately want the glovebox and the two metal filler tubes shipped to 11215 in Brooklyn NY 11215 and signature required __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-08-2011, 06:51 PM	#37
The Reca Registered User Join Date: May 2011 Location: Manassas, VA Posts: 56	Re: Parting 84 K10 Long Bed are you still parting out this truck?

05-08-2011, 11:14 PM	#39
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed Bob, Here's pics of the 75 Blazer glove box...I will pull the fillers Mon. and get shipping quote. Pic of 80's bezel Thanks, Ray Attached Images

05-09-2011, 02:52 PM	#41
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed The wiring on this truck was junk. I might have one from a 77-78 cab, but I think its different. Thanks, Ray

05-17-2011, 09:19 PM	#42
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,270	Re: Parting 84 K10 Long Bed http://67-72chevytrucks.com/vboard/s...72#post4686172 in case anyone wants to know how Ray is to do business with __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-20-2011, 01:06 AM	#43
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed Bob, Thanks for the kind words!

06-14-2011, 08:36 PM	#45
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed I will take a look on Fri. Thanks, Ray

06-18-2011, 02:22 PM	#46
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 84 K10 Long Bed I have nothing compatible right now. Sorry. Thanks, Ray



Register or Log In To remove these advertisements.

05-13-2012, 05:32 AM	#47
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: Parting 84 K10 Long Bed I need a 91 or earlier 4x4 crew-cab bare frame im in orange county cal. can you help me ,every time I find one its half way across the country...Thank you for any help.... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

05-14-2012, 11:32 AM	#48
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting 84 K10 Long Bed Any way of getting the wiring with the fuel crossover lines??? Posted via Mobile Device __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

05-14-2012, 01:01 PM	#49
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 84 K10 Long Bed Ray, do you have a good radio opening (the metal section) on the dash? I need enough to put a factory radio in my '74. A set of erly knobs and a rear brace for a radio would be sweet as well, shipped to 75080. __________________ 1974 Jimmy- 5.3/4L80e/NP241

05-14-2012, 06:15 PM	#50
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parting 84 K10 Long Bed could you post the car's picture so everything will be clear __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

Register or Log In To remove these advertisements.