$999 for a Dropmember - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

royo · 10-19-2008, 08:23 PM

Quote:

Originally Posted by SCOTI

Yes.

kool thanks

Project SIKty-5 · 10-20-2008, 09:00 PM

Ok, I'm guessing this has been discussed somewhere in here already...but R&P is there a big difference in manual and power...Nate what are your thoughts, I'm sure you deal with that question quite a bit, what do you suggest??

dragalac · 10-21-2008, 07:29 AM

hey was wondering if it was three week or four week turn around time right now nate trying to schedule a date at powder coater?

spr85gmc · 10-22-2008, 03:07 PM

Quote:

Originally Posted by Project SIKty-5

Ok, I'm guessing this has been discussed somewhere in here already...but R&P is there a big difference in manual and power...Nate what are your thoughts, I'm sure you deal with that question quite a bit, what do you suggest??

i was thinking the same think bur could figure out a answer

SCOTI · 10-22-2008, 05:25 PM

Quote:

Originally Posted by Project SIKty-5

Ok, I'm guessing this has been discussed somewhere in here already...but R&P is there a big difference in manual and power...Nate what are your thoughts, I'm sure you deal with that question quite a bit, what do you suggest??

He did mention back in a post (in Dinos thread about his 66) that for sbc's he likes the manual rack. He said it did require more steering effort but that it wasn't bad (& would keep the sissys out of your truck).

royo · 10-22-2008, 08:39 PM

do you guys thing that one of those dropmembers will fit here

SCOTI · 10-22-2008, 09:08 PM

Quote:

Originally Posted by royo

do you guys thing that one of those dropmembers will fit here

Like it was made for it

.

PBFAB.COM · 10-22-2008, 11:53 PM

Quote:

Originally Posted by SCOTI

He did mention back in a post (in Dinos thread about his 66) that for sbc's he likes the manual rack. He said it did require more steering effort but that it wasn't bad (& would keep the sissys out of your truck).

The manual rack does give more "feel"... but can be a PITA when parking. If you have a big steering wheel and Popeye sized forearms it isn't too bad!

I would most likely stick a power rack in anything I would build for myslef.

PBFAB.COM · 10-22-2008, 11:54 PM

Quote:

Originally Posted by royo

do you guys thing that one of those dropmembers will fit here

It sure will!

dirtyd_nd · 11-09-2008, 09:24 PM

I just searched this thread and didn't see anything that said I could or couldn't. . . Can you run a big block with the Dropmember?
Dale

royo · 11-09-2008, 10:21 PM

Quote:

Originally Posted by dirtyd_nd

I just searched this thread and didn't see anything that said I could or couldn't. . . Can you run a big block with the Dropmember?
Dale

Yes but when your order he will ask about your engine tranny combo

higgiec10 · 11-10-2008, 09:02 PM

do you need drop spindles with the drop member

**N2TRUX** · 11-10-2008, 10:32 PM

Quote:

Originally Posted by higgiec10

do you need drop spindles with the drop member

No, you do not. You may decide you want them, but they are not required.

Here's what it looks like with out spindles-

BACKYARD88 · 11-10-2008, 10:48 PM

Looks nice enough to me

PBFAB.COM · 11-11-2008, 12:06 AM

Spindle selection will depend on overall tire diameter and desired dumped height.

Project SIKty-5 · 11-11-2008, 07:49 PM

Nate, when can we expect to start seeing some UPS boxes show up??

PBFAB.COM · 11-11-2008, 07:58 PM

Quote:

Originally Posted by Project SIKty-5

Nate, when can we expect to start seeing some UPS boxes show up??

They will be leaving here within the next couple days!

Project SIKty-5 · 11-12-2008, 01:00 PM

Nate, if I wasn't so masculine and afraid to let out my true feelings...I'd give you a hug

Project SIKty-5 · 11-12-2008, 01:01 PM

N2TRUX, that picture just makes me smile and slip into a daze....it kinda warms my heart like the 1st time I heard stairway to heaven

**N2TRUX** · 11-12-2008, 11:00 PM

Quote:

Originally Posted by Project SIKty-5

N2TRUX, that picture just makes me smile and slip into a daze....it kinda warms my heart like the 1st time I heard stairway to heaven

And shes buyin a staaairway to heeeeaven....

lowdownstar · 11-13-2008, 07:56 AM

ok guys come back down to earth! lol I want to see pictures, if those parts are making it to your homes and your going to be putting them in, i want to see pictures..... I am way down the list for the drop member and would love to see how good these are coming out, so i can sing along as well....

thanks Ray

that is one good looking truck N2TURX

**N2TRUX** · 11-13-2008, 09:53 AM

Quote:

Originally Posted by lowdownstar

...
that is one good looking truck N2TRUX

Not mine, but thanks. It has a Porterbuilt rear kit too LINK

Project SIKty-5 · 11-13-2008, 11:37 AM

I hope to start a build thread as parts start coming in and I get working on the truck....my goal is to have my truck running by Viva Las Vegas, for those that have never been....it's a blast, I recommend checking it out....mark your calendars for April 9 - 12

98L150 · 11-13-2008, 11:38 AM

lowdownstar,
according to ups there should be some dropmember kits delivered to me this Friday and I will post some pics of the kits & projects of mine and my friends they are going on.

lowdownstar · 11-13-2008, 07:06 PM

thanks 98L150 i love to see what people are doing to their rides.... Project SIKty-5 please let us know when you start your build thread i love to read and watch people putting there rides together...

don't forget to have fun and take lots of pictures!

thanks Ray

10-20-2008, 09:00 PM	#227
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: $999 for a Dropmember Ok, I'm guessing this has been discussed somewhere in here already...but R&P is there a big difference in manual and power...Nate what are your thoughts, I'm sure you deal with that question quite a bit, what do you suggest??

10-21-2008, 07:29 AM	#228
dragalac Registered User Join Date: May 2008 Location: Belle Bose Louisiana Posts: 9	Re: $999 for a Dropmember hey was wondering if it was three week or four week turn around time right now nate trying to schedule a date at powder coater?

10-22-2008, 08:39 PM	#231
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: $999 for a Dropmember do you guys thing that one of those dropmembers will fit here __________________ nickle and dime Last edited by royo; 10-22-2008 at 08:40 PM.

11-09-2008, 09:24 PM	#235
dirtyd_nd Registered User Join Date: Jul 2006 Location: JACKSONVILLE, FL Posts: 112	Re: $999 for a Dropmember I just searched this thread and didn't see anything that said I could or couldn't. . . Can you run a big block with the Dropmember? Dale

11-10-2008, 09:02 PM	#237
higgiec10 Registered User Join Date: Dec 2005 Location: baytown Posts: 243	Re: $999 for a Dropmember do you need drop spindles with the drop member

11-10-2008, 10:48 PM	#239
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: $999 for a Dropmember Looks nice enough to me __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

11-11-2008, 12:06 AM	#240
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: $999 for a Dropmember Spindle selection will depend on overall tire diameter and desired dumped height. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

11-11-2008, 07:49 PM	#241
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: $999 for a Dropmember Nate, when can we expect to start seeing some UPS boxes show up??

11-12-2008, 01:00 PM	#243
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: $999 for a Dropmember Nate, if I wasn't so masculine and afraid to let out my true feelings...I'd give you a hug

11-12-2008, 01:01 PM	#244
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: $999 for a Dropmember N2TRUX, that picture just makes me smile and slip into a daze....it kinda warms my heart like the 1st time I heard stairway to heaven

11-13-2008, 07:56 AM	#246
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: $999 for a Dropmember ok guys come back down to earth! lol I want to see pictures, if those parts are making it to your homes and your going to be putting them in, i want to see pictures..... I am way down the list for the drop member and would love to see how good these are coming out, so i can sing along as well.... thanks Ray that is one good looking truck N2TURX

11-13-2008, 11:37 AM	#248
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: $999 for a Dropmember I hope to start a build thread as parts start coming in and I get working on the truck....my goal is to have my truck running by Viva Las Vegas, for those that have never been....it's a blast, I recommend checking it out....mark your calendars for April 9 - 12

11-13-2008, 11:38 AM	#249
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: $999 for a Dropmember lowdownstar, according to ups there should be some dropmember kits delivered to me this Friday and I will post some pics of the kits & projects of mine and my friends they are going on. __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-13-2008, 07:06 PM	#250
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: $999 for a Dropmember thanks 98L150 i love to see what people are doing to their rides.... Project SIKty-5 please let us know when you start your build thread i love to read and watch people putting there rides together... don't forget to have fun and take lots of pictures! thanks Ray Last edited by lowdownstar; 11-13-2008 at 07:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.