What did you do today not on your truck... - Page 90 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Boog** · 02-12-2022, 02:14 PM

Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that?

**LockDoc** · 02-12-2022, 02:33 PM

Quote:

Originally Posted by Boog

Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that?

Same problem here in Iowa. Wife wanted to make Monkey Bread for breakfast last Saturday morning. No biscuits to be found....

I just went to the grocery store, no milk. I can't buy a cow because I don't have a barn any more.... Double...

..

... & a

LockDoc

**Getter-Done** · 02-12-2022, 03:13 PM

What's next????

Name: butter.jpg
Views: 222
Size: 33.5 KB

**FleetsidePaul** · 02-12-2022, 05:11 PM

Quote:

Originally Posted by 72c20customcamper

Found a set of made in France Marchal driving lights in an old Hershey sell box . One has a minor chip in the lens from knocking around but are new . My guess mid 80’s ?

Edit: guess I got them from my uncles Jeep dealership . They were standard equipment on the 1982 Jeep Jamboree didn’t take long to find out on a google search

I had a set similar to that on my 86 Mustang GT. I wanted to get the covers for them but none were to be found at Pick A Part. The Mustang's were always picked clean. Then I realized that the Lincoln Mark VII had the same lights. All the Mustang guys had missed them. I must have bought 10 sets for under 10 bucks a set. I put them on Ebay and got about $100 a pair. Not a bad deal until someone else figured it out too. Then they were gone too.

1slo64 · 02-12-2022, 06:06 PM

Glued in the headliner of the mustang today. Windshields hopefully can go in next weekend.

72c20customcamper · 02-12-2022, 07:38 PM

Made an Adze . Used an old leaf spring for the blade and just some rod for the handle. Which I’m not happy with its to small so I’ll be making a new one but it works well .

**special-K** · 02-12-2022, 07:48 PM

Nice work. I have those tools, adze, froe, and draw knife. The adze was listed as a maddock. Always cracks me up when someone is selling something and they don't even know what it is. I bought a "bacon press" I use often. It's made from aluminum, wooden handle, shaped in an arch with slots in it. That's because it's a pot strainer. How did they figure a light aluminum utensil would flatten out bacon?

1slo64 · 02-12-2022, 09:03 PM

Quote:

Originally Posted by Boog

Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that?

Frozen fries, cinnamon rolls, and biscuits are things we have been out of almost entirely since Christmas.

**Getter-Done** · 02-12-2022, 09:31 PM

Quote:

Originally Posted by Boog

Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that?

Hey Boog
We have a few biscuits here.
Do you want me to ship you some?

Name: biscuit.jpg
Views: 200
Size: 50.0 KB

**Boog** · 02-12-2022, 11:06 PM

Yeah buddy. You'd be wise to latch onto some extra cans now that you know there is an apparent NATIONAL shortage of em. After the past two years we are used to some items missing on the shelves now and again but this is a first being biscuits. Not even the cheapest brands are to be found. I've never made biscuits, yet. You tube here I come.

Inquiring minds want to know!

**Getter-Done** · 02-12-2022, 11:15 PM

I can see it now.
What did you do /Not to your truck?

I learned how to make Biscuits & Gravy

Here's your Guy to learn from

Old Fashioned Biscuits and Gravy - YouTube

**Boog** · 02-13-2022, 12:07 AM

Oh yeah. My guy Cowboy Kent. Some good cooking right there. Yessiree!

**special-K** · 02-13-2022, 09:25 AM

I'll have to check him out. I'm all about home made. I couldn't tell you the last time I bought those tube biscuits. I could count the times on one hand. They are tasty and all that, and I wouldn't turn them down if you offered me some. I just prefer home made. I'll be making apple crisp for this evening, before my son eats all the vanilla ice cream! I'd make some of that, but need ingredients and no running out today.

I got that old style oak shoe ran off yesterday. The router bit wasn't the exact profile, but I realized I could rip a square edge and rip a second side where the curve went to square and come real close to a match.

Here is the store-bought (darker) and mine
Name: DSCN0117.jpg
Views: 176
Size: 44.2 KB

Name: DSCN0117.jpg
Views: 176
Size: 44.2 KB

Name: DSCN0118.jpg
Views: 184
Size: 53.3 KB

Name: DSCN0121.jpg
Views: 182
Size: 57.8 KB

Before I got too carried away, I realized I didn't need a whole lot of it for now and didn't run off the whole board. Turned out that 1x6 I found was 12'. I'll have other uses for the rest.

I had plenty of afternoon left, so I got back on my barn move project. I think it's been since Thanksgiving since I've done anything. I have the "move from" side all prepped and ready for the move, had the "move to" wall temporary supported, and ready to cut posts. I cut all but the front corner and installed what bottom plates I could, till I get to that front corner. I think I'll do the rest today.

These are pictures of what I started with, before putting up the temporary posts and beams. The back corner does have a single temporary post because I had to cut out the back corner post to put the stem wall in

72c20customcamper · 02-13-2022, 11:02 AM

Mouldings look great . The barn move is coming along .

**72peace** · 02-13-2022, 11:40 AM

Fired up the Traeger and smoked some meat!

**LockDoc** · 02-13-2022, 01:05 PM

Quote:

Originally Posted by 72peace

Fired up the Traeger and smoked some meat!

That looks mighty tasty. I was checking on Google to see how far Bellevue was from Montezuma....

..

LockDoc

**Rickysnickers** · 02-13-2022, 02:35 PM

Quote:

Originally Posted by 72peace

Fired up the Traeger and smoked some meat!

I'll be right over

72c20customcamper · 02-13-2022, 03:34 PM

Quote:

Originally Posted by 72peace

Fired up the Traeger and smoked some meat!

Looks great ! My smoker is snowbound right now have to settle for grilling with lump charcoal

**LockDoc** · 02-13-2022, 04:18 PM

Quote:

Originally Posted by Boog

Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that?

Quote:

Originally Posted by 1slo64

Frozen fries, cinnamon rolls, and biscuits are things we have been out of almost entirely since Christmas.

I found out what is going on with the biscuits. The manufacturers can't get the metal ends for the tubes they are packaged in..... Plenty of biscuits and tubes just no metal ends.

LockDoc

**FleetsidePaul** · 02-13-2022, 05:03 PM

Quote:

Originally Posted by 72peace

Fired up the Traeger and smoked some meat!

Oh man that looks good.

I've been so wanting a Traeger smoker. I guess I'll just have to drop some less than subtle hints before Valentines Day.

I just got done making a panic run to get tortilla chips. I'm making nachos for the game. I went to the store yesterday and got everything. All the fixins for my famous nachos.

Everything but one thing. I forgot the chips.

I got lucky. They had fresh home made ones.

I was really panicked after the whole saltine cracker incident. My wife finally did manage to find those. Halleluiah. I'm set to go. Now all I have to do is heat them up and drink lots of beer. Go Rams

**Getter-Done** · 02-13-2022, 05:08 PM

Quote:

Originally Posted by FleetsidePaul

Go Rams

Easy does it

This is a Chevy & GMC forum

**Steeveedee** · 02-13-2022, 05:47 PM

I'm waiting for the game to start so the store won't be crowded. And getting an early dinner where there are no televisions.

**Boog** · 02-13-2022, 07:35 PM

Quote:

Originally Posted by LockDoc

I found out what is going on with the biscuits. The manufacturers can't get the metal ends for the tubes they are packaged in..... Plenty of biscuits and tubes just no metal ends.

LockDoc

Really? They can't get little tin can lids? Don't tell me they are imported..

Did they ever clear out those cargo ships backed up at Sand Diego?

**Steeveedee** · 02-13-2022, 08:37 PM

Current president cleared the way for 24 hour operations at the ports, and the back log is diminishing.

**special-K** · 02-13-2022, 09:02 PM

Quote:

Originally Posted by FleetsidePaul

Oh man that looks good.

I've been so wanting a Traeger smoker. I guess I'll just have to drop some less than subtle hints before Valentines Day.

You mean today?

I don't get the hype over Traeger smokers. I guess I don't get it because I've been smoking killer smoked meats on all sorts of smokers, including home made, for decades before Traeger went on their huge advertising push. Not just my smoked yummies, but from many people and restaurants. I guess I was never meant to be a consumerist. I missed that boat. I do not understand the brand hype at all. Currently I am using an El Cheapo CharBroil offset smoker. But I also have a vertical Weber. Never even heard of Treager five years ago and people have been eating great smoked meat since before any of us were born

02-12-2022, 02:14 PM	#2226
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,997	Re: What did you do today not on your truck... Well who's hoarding all the darn biscuits? I've been to four stores this week looking for canned biscuits. Everybody is OUT! What's up with that? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-12-2022, 03:13 PM	#2228
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,782	Re: What did you do today not on your truck... What's next???? __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

02-12-2022, 06:06 PM	#2230
1slo64 Registered User Join Date: Feb 2019 Location: Madison, AL Posts: 302	Re: What did you do today not on your truck... Glued in the headliner of the mustang today. Windshields hopefully can go in next weekend. Attached Images __________________ 1964 GMC Fleetside SWB 1966 Mustang Coupe

02-12-2022, 07:38 PM	#2231
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do today not on your truck... Made an Adze . Used an old leaf spring for the blade and just some rod for the handle. Which I’m not happy with its to small so I’ll be making a new one but it works well . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

02-12-2022, 07:48 PM	#2232
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What did you do today not on your truck... Nice work. I have those tools, adze, froe, and draw knife. The adze was listed as a maddock. Always cracks me up when someone is selling something and they don't even know what it is. I bought a "bacon press" I use often. It's made from aluminum, wooden handle, shaped in an arch with slots in it. That's because it's a pot strainer. How did they figure a light aluminum utensil would flatten out bacon? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-12-2022, 11:06 PM	#2235
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,997	Re: What did you do today not on your truck... Yeah buddy. You'd be wise to latch onto some extra cans now that you know there is an apparent NATIONAL shortage of em. After the past two years we are used to some items missing on the shelves now and again but this is a first being biscuits. Not even the cheapest brands are to be found. I've never made biscuits, yet. You tube here I come. Inquiring minds want to know! __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-13-2022, 12:07 AM	#2237
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,997	Re: What did you do today not on your truck... Oh yeah. My guy Cowboy Kent. Some good cooking right there. Yessiree! __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-13-2022, 09:25 AM	#2238
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What did you do today not on your truck... I'll have to check him out. I'm all about home made. I couldn't tell you the last time I bought those tube biscuits. I could count the times on one hand. They are tasty and all that, and I wouldn't turn them down if you offered me some. I just prefer home made. I'll be making apple crisp for this evening, before my son eats all the vanilla ice cream! I'd make some of that, but need ingredients and no running out today. I got that old style oak shoe ran off yesterday. The router bit wasn't the exact profile, but I realized I could rip a square edge and rip a second side where the curve went to square and come real close to a match. Here is the store-bought (darker) and mine Before I got too carried away, I realized I didn't need a whole lot of it for now and didn't run off the whole board. Turned out that 1x6 I found was 12'. I'll have other uses for the rest. I had plenty of afternoon left, so I got back on my barn move project. I think it's been since Thanksgiving since I've done anything. I have the "move from" side all prepped and ready for the move, had the "move to" wall temporary supported, and ready to cut posts. I cut all but the front corner and installed what bottom plates I could, till I get to that front corner. I think I'll do the rest today. These are pictures of what I started with, before putting up the temporary posts and beams. The back corner does have a single temporary post because I had to cut out the back corner post to put the stem wall in Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-13-2022, 11:02 AM	#2239
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do today not on your truck... Mouldings look great . The barn move is coming along . __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

02-13-2022, 11:40 AM	#2240
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: What did you do today not on your truck... Fired up the Traeger and smoked some meat! Attached Images __________________ 70 Custom 10 350 w/700r4 (current) 69 Custom 10 I250 Three on the Tree 72 Cheyenne Super 350 66 Ford F100 I240 Three on the Tree 72 Chevelle Malibu 402 66 Pontiac Catalina 421 65 Ford Fairlane 500

02-13-2022, 05:47 PM	#2247
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,130	Re: What did you do today not on your truck... I'm waiting for the game to start so the store won't be crowded. And getting an early dinner where there are no televisions. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

02-13-2022, 08:37 PM	#2249
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,130	Re: What did you do today not on your truck... Current president cleared the way for 24 hour operations at the ports, and the back log is diminishing. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.