MA WTB Dash repair piece for AC dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thealien · 07-06-2021, 01:01 PM

I need a repair piece for the cut up radio section for a 1972 Blazer. I know trucks and other years fit just letting you know what I need it for.

Let me know what you have and how much shipped to 02302.

Thanks
Mark

**BigBird05** · 07-06-2021, 05:18 PM

I have one. How big of a piece do you need? It is out of a 71 C-10. $50.00 shipped.

Thealien · 07-06-2021, 06:29 PM

This is not an AC dash and the wrong year but its the best I could come up with.

Cutting like this is the least welding and some is covered by the dash pad.

**Grumpy old man** · 07-06-2021, 07:59 PM

Cut it like this red section and just drill the spot welds on the bottom , That way you don't cut thru the bottom support brace and there is very little welding and filling .

Thealien · 07-06-2021, 08:10 PM

Quote:

Originally Posted by Grumpy old man

Cut it like this red section and just drill the spot welds on the bottom , That way you don't cut thru the bottom support brace and there is very little welding and filling .

Thanks for that tip and or suggestion.

**BigBird05** · 07-06-2021, 08:16 PM

That is a very large piece. I was thinking it would be a lot smaller. I can't ship that big of a piece for free.

Thealien · 07-06-2021, 08:31 PM

Quote:

Originally Posted by BigBird05

That is a very large piece. I was thinking it would be a lot smaller. I can't ship that big of a piece for free.

Post a picture of the piece and get a shipping quote for 02302?

**Grumpy old man** · 07-06-2021, 08:32 PM

Doing it that way saves work and keeps the lower brace intact . using the glove box hinge and lower steering column cover assures you have it correctly aligned .

bL.A.zer90045 · 07-06-2021, 11:39 PM

piece a pictured----75.39 shipped.

**BigBird05** · 07-07-2021, 08:03 AM

I think you should go with bl.A.zer 90045. I haven't had time to remove piece from the dash yet.

Thealien · 07-07-2021, 10:16 AM

Quote:

Originally Posted by bL.A.zer90045

piece a pictured----75.39 shipped.

Please post or send me a picture. Just want to make sure. If it is as described I will take it. Do you plan on cutting as Grumpy Old Man suggested?

Thanks
Mark

Thealien · 07-09-2021, 03:46 PM

Nobody has gotten back to me I’m still looking for a dash piece.

**BigBird05** · 07-10-2021, 08:19 AM

I just read an add for a dash in Raleigh, NC. I am waiting for him to get back to me.

**BigBird05** · 07-10-2021, 09:36 PM

The guy in Raleigh got back to me and I am trying to get the dash for you.

**1rippen6** · 07-11-2021, 04:37 PM

I'm picking up an a/c on Tuesday, if no one gets back to you. I won't know the condition until I pick it up.

Thealien · 07-11-2021, 04:57 PM

sounds good! Thanks

**1rippen6** · 07-15-2021, 03:43 PM

Here is what I have, it does have an extra hole beside the radio. I have a local interested but it has some weird rust on top of the dash so I think he is going to pass.

Thealien · 07-17-2021, 11:42 AM

Quote:

Originally Posted by 1rippen6

Here is what I have, it does have an extra hole beside the radio. I have a local interested but it has some weird rust on top of the dash so I think he is going to pass.

Let me know if they pass?

Still searching for AC dash piece.

**1rippen6** · 07-17-2021, 11:59 AM

Quote:

Originally Posted by Thealien

Let me know if they pass?

Still searching for AC dash piece.

He picked it up last night, I'll look and see if I may have a patch stashed in storage.

Thealien · 07-20-2021, 05:53 PM

Still need a dash repair piece

Thanks

**BigBird05** · 07-21-2021, 12:14 PM

A friend of mine had this dash at his house. there are 4 small screw holes that will need to be filled. They are from a CB and some other thing. He wants $100 for the whole dash + shipping or he will cut out any size piece you want. It is from a 1970 C-10.

Thealien · 07-21-2021, 03:41 PM

Quote:

Originally Posted by BigBird05

A friend of mine had this dash at his house. there are 4 small screw holes that will need to be filled. They are from a CB and some other thing. He wants $100 for the whole dash + shipping or he will cut out any size piece you want. It is from a 1970 C-10.

I would want it cut just like grumpy old man shows in Post number four.

Before he starts to cut it see if there’s a way he can get a shipping estimate for that size as shown in post number 4 shipped to ZIP Code 02302.

**BigBird05** · 07-21-2021, 04:27 PM

I will take some ruff measurements and take it to the post office tomorrow.

**BigBird05** · 07-22-2021, 10:45 AM

The ruff estimate I got was for UPS $16.83, USPS $14.65. These are going off of a 5lb weight. If the actual weight is less I will let you know. If this is OK pm me your information

Thealien · 07-28-2021, 12:18 PM

Quote:

Originally Posted by BigBird05

The ruff estimate I got was for UPS $16.83, USPS $14.65. These are going off of a 5lb weight. If the actual weight is less I will let you know. If this is OK pm me your information

Received thanks

07-06-2021, 01:01 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	WTB Dash repair piece for AC dash I need a repair piece for the cut up radio section for a 1972 Blazer. I know trucks and other years fit just letting you know what I need it for. Let me know what you have and how much shipped to 02302. Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-06-2021, 05:18 PM	#2
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash I have one. How big of a piece do you need? It is out of a 71 C-10. $50.00 shipped.

07-06-2021, 06:29 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: WTB Dash repair piece for AC dash This is not an AC dash and the wrong year but its the best I could come up with. Cutting like this is the least welding and some is covered by the dash pad. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-06-2021, 07:59 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB Dash repair piece for AC dash Cut it like this red section and just drill the spot welds on the bottom , That way you don't cut thru the bottom support brace and there is very little welding and filling . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-06-2021, 08:16 PM	#6
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash That is a very large piece. I was thinking it would be a lot smaller. I can't ship that big of a piece for free.

07-06-2021, 08:32 PM	#8
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB Dash repair piece for AC dash Doing it that way saves work and keeps the lower brace intact . using the glove box hinge and lower steering column cover assures you have it correctly aligned . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-06-2021, 11:39 PM	#9
bL.A.zer90045 Registered User Join Date: May 2012 Location: 90045 cali Posts: 565	Re: WTB Dash repair piece for AC dash piece a pictured----75.39 shipped.

07-07-2021, 08:03 AM	#10
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash I think you should go with bl.A.zer 90045. I haven't had time to remove piece from the dash yet.

07-09-2021, 03:46 PM	#12
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: WTB Dash repair piece for AC dash Nobody has gotten back to me I’m still looking for a dash piece. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-10-2021, 08:19 AM	#13
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash I just read an add for a dash in Raleigh, NC. I am waiting for him to get back to me.

07-10-2021, 09:36 PM	#14
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash The guy in Raleigh got back to me and I am trying to get the dash for you.

07-11-2021, 04:37 PM	#15
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,711	Re: WTB Dash repair piece for AC dash I'm picking up an a/c on Tuesday, if no one gets back to you. I won't know the condition until I pick it up.

07-11-2021, 04:57 PM	#16
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: WTB Dash repair piece for AC dash sounds good! Thanks __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-15-2021, 03:43 PM	#17
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,711	Re: WTB Dash repair piece for AC dash Here is what I have, it does have an extra hole beside the radio. I have a local interested but it has some weird rust on top of the dash so I think he is going to pass. Attached Images

07-20-2021, 05:53 PM	#20
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: WTB Dash repair piece for AC dash Still need a dash repair piece Thanks __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205



Register or Log In To remove these advertisements.

07-21-2021, 12:14 PM	#21
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash A friend of mine had this dash at his house. there are 4 small screw holes that will need to be filled. They are from a CB and some other thing. He wants $100 for the whole dash + shipping or he will cut out any size piece you want. It is from a 1970 C-10. Attached Images

07-21-2021, 04:27 PM	#23
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash I will take some ruff measurements and take it to the post office tomorrow.

07-22-2021, 10:45 AM	#24
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB Dash repair piece for AC dash The ruff estimate I got was for UPS $16.83, USPS $14.65. These are going off of a 5lb weight. If the actual weight is less I will let you know. If this is OK pm me your information

Register or Log In To remove these advertisements.