1946 chevy truck build.

[joedoh]

Originally Posted by dillonv2008

I think I'm starting to under stand a little so I want from a side view. my upper bars to be around 20-30% less then lower bars. so if I was was to measure from axle to the link on the frame staying along the frame rail and my lower bar was say 30" id want my upper bar to be around 25" say. BUT the actual spec length of the bar doesn't matter only what you measure from a center axle to the link along the frame rail. and where ever that mark lands I go out 30* + to axle. idk if this is really really confusing or not haha in the picture I want lower bars to be longer then uppers but measure from side view not top.

nope you got it. look from the side and that is the length that matters.