83 C-10 steering column parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 02-03-2014, 11:32 PM

Just picked up a very basic 82 C-10 Custom Deluxe with 250 six and 3 speed column shift. The shifter is very sloppy, and I knew when I bought the truck that I'd have to rebuild the column. But what I didn't know is parts are impossible to find! My upper and lower steering shaft bearings are not perfect, but OK. However, the gearshift housing (this is what the shift handle is connected too) wobbles badly.

Anyway, I disassembled the column and determined it must be missing a bearing that fits into the white bearing support in the picture. The support fits into the upper part of the column, and then the bearing fits in the retainer. The gearshift housing then slides onto the retainer & bearing.

I stopped by a Chevy dealer today, and learned that part along with several others, are no longer available. I'd really like to keep the column shifter, but it sounds like I'm hosed. Of course, I screwed up and didn't get the P/N, so will do that tomorrow and see if I can find one somewhere on the Internet.

02-03-2014, 11:32 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,442	83 C-10 steering column parts Just picked up a very basic 82 C-10 Custom Deluxe with 250 six and 3 speed column shift. The shifter is very sloppy, and I knew when I bought the truck that I'd have to rebuild the column. But what I didn't know is parts are impossible to find! My upper and lower steering shaft bearings are not perfect, but OK. However, the gearshift housing (this is what the shift handle is connected too) wobbles badly. Anyway, I disassembled the column and determined it must be missing a bearing that fits into the white bearing support in the picture. The support fits into the upper part of the column, and then the bearing fits in the retainer. The gearshift housing then slides onto the retainer & bearing. I stopped by a Chevy dealer today, and learned that part along with several others, are no longer available. I'd really like to keep the column shifter, but it sounds like I'm hosed. Of course, I screwed up and didn't get the P/N, so will do that tomorrow and see if I can find one somewhere on the Internet. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.