The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > 60-66 Suburbans

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-08-2015, 10:18 AM   #1
1966burb
Registered User
 
1966burb's Avatar
 
Join Date: Jul 2013
Location: Maltby WA
Posts: 435
Stock exhaust system

Looking for a complete STOCK single exhaust system to put on a my 66 Burb with 327. Would like aluminized pipes and complete with all hangers etc.
Any ideas who sells a top quality system? FLOWMASTER system that was put on my burb, sounds great but on long trips I would like to be able to hear my radio playing. Jim
1966burb is offline   Reply With Quote
Old 06-08-2015, 06:56 PM   #2
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: Stock exhaust system

where do your tailpipes come out?
ron
padresag is offline   Reply With Quote
Old 06-08-2015, 08:44 PM   #3
argonaut
Senior Member
 
argonaut's Avatar
 
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
Re: Stock exhaust system

I have one that I just took off of my suburban. Only problem is that it's 51 years old! But seriously, if you were closer you could take it to a muffler so and have it copied.
__________________
Jason M. @argonaut62

1972 K5 Blazer CST, Turquoise
1966 K20 Short Fleet Pickup, Big Ugly
1964 C10 Short Fleet, Gertrude

2001 Porsche 911 Carrera
1996 Ford Bronco XLT
1980 Jeep Wagoneer

2008 Honda CBR1000RR
2005 Honda RC51
1981 Honda CB750C


No dis-assemble Johnny Five! No dis-assemble!
argonaut is offline   Reply With Quote
Old 06-08-2015, 09:27 PM   #4
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: Stock exhaust system

this the stock type muffler for a 65GMC panel


ron
padresag is offline   Reply With Quote
Old 06-10-2015, 02:08 AM   #5
argonaut
Senior Member
 
argonaut's Avatar
 
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
Re: Stock exhaust system

I would have your local exhaust shop make it. its basically a Y pipe like below, over to the driver's side. then straight back, up over the rear axle and back down, then a 90 degree bend out behind the rear tire. Simple simple.

__________________
Jason M. @argonaut62

1972 K5 Blazer CST, Turquoise
1966 K20 Short Fleet Pickup, Big Ugly
1964 C10 Short Fleet, Gertrude

2001 Porsche 911 Carrera
1996 Ford Bronco XLT
1980 Jeep Wagoneer

2008 Honda CBR1000RR
2005 Honda RC51
1981 Honda CB750C


No dis-assemble Johnny Five! No dis-assemble!
argonaut is offline   Reply With Quote
Old 12-13-2015, 12:44 AM   #6
fleetman
Registered User
 
Join Date: May 2010
Location: dunedin, fl
Posts: 173
Re: Stock exhaust system

Walker muffler has all the exhaust system pipes for the truck. They have schematic showing complete layout with pics of parts and part numbers.
Hth
fleetman is offline   Reply With Quote
Old 12-13-2015, 10:59 AM   #7
tmck
Registered User
 
tmck's Avatar
 
Join Date: Feb 2014
Location: San Pablo
Posts: 43
Re: Stock exhaust system

Check out heartthrobexhaust.com. They make all the exhaust systems for J.C. Whitney. I ordered a dual exhaust system with side exit behind rear wheels, for a 65 Suburban. Chose the stock style mufflers, everything bolted up and fit like advertised. I modified it some to fit up tighter to the frame, I didn't need to, but wanted to. Drives nice and quiet on the highway, sounds good at an idle. Total was $365. to my door.
tmck is offline   Reply With Quote
Old 01-04-2016, 11:13 PM   #8
65chevysub
Registered User
 
65chevysub's Avatar
 
Join Date: Feb 2013
Location: Cottonwood, Arizona
Posts: 1,373
Re: Stock exhaust system

Quote:
Originally Posted by tmck View Post
Check out heartthrobexhaust.com. They make all the exhaust systems for J.C. Whitney. I ordered a dual exhaust system with side exit behind rear wheels, for a 65 Suburban. Chose the stock style mufflers, everything bolted up and fit like advertised. I modified it some to fit up tighter to the frame, I didn't need to, but wanted to. Drives nice and quiet on the highway, sounds good at an idle. Total was $365. to my door.
How did you tighten up your tailpipes? Mine angle down and Im not happy with it and would like to have them "raised" closer to the frame.
65chevysub is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com