|
04-15-2016, 12:35 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
my new 64 tonka
well I few months back I picked up this 64 panel, it may not be in the best shape but that's fine !
so when I got it I discovered that the PO cut the front clip off and replaced it with a clip off a Cadillac escalade, not sure about the welding job so I just decided to find another frame and build it up the way I want it, since this is going to be my driver I wanted to make it as nice as I could, so this is what I have done so far. so I got the frame home and it's like so rusted so I spent a couple of days cleaning, then did the Por-15 thing , swaped out the front cross member to one out of a 82 truck, I have purchased upper and lower tubular control arms and 3 inch dropped spindles and of course all new steering , brakes etc, the plan is 4 wheel disk brakes, I have a nice 350 & 700R4 the 12 bolt that was in the frame turned out to be needing more work than I wanted to do and the fact that its the 17 spline axle . so I will see if I can post some pictures so you guys can take a look at this project.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
04-15-2016, 12:38 AM
|
#2 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
some pictures, I will try to keep them in order.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
04-15-2016, 12:43 AM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
bringing it home and the rusted ole frame that I'm going to use
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
04-15-2016, 12:46 AM
|
#4 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
started the build with the new stuff
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
04-15-2016, 12:47 AM
|
#5 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
just more updates
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
04-15-2016, 12:53 AM
|
#6 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
so that's what I have done up to this point, tomorrow I am going to pull the rear end out of the old frame and get it home, clean it up get the disk brakes on, I am hoping that by the middle of may I should have the body back on this frame , I have purchased a few brackets from capt. fab and since I used his stuff in the other 64 truck that I built I decided to use them again.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
05-06-2016, 08:42 PM
|
#7 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
I think I have this in the wrong section, can anyone help get this moved to the project section.
thank you Henry.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
05-07-2016, 12:32 AM
|
#8 |
|
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: my new 64 tonka
Actually you do have it in the right place. If you really want it moved I can do that.
__________________
. 1965 C10 Panel,  Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
|
|
|
|
05-07-2016, 05:01 PM
|
#9 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
no lets leave it here then, I hope your panel is moving along.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
05-07-2016, 05:29 PM
|
#10 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
more updates ! so I have the rear end back in and now i'm in the process of just getting all the little welding done, things like the new axle saddles , brake hose tabs, I have new u-bolts and lower brackets , I hope to have all this taken care of by the middle of the week, I cant weld because of my pacemaker , so I have a good friend taking care of that for me.
I will post some pictures soon.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
05-07-2016, 10:19 PM
|
#11 |
|
One foot in front of the other
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,426
|
Re: my new 64 tonka
Nice progress.
|
|
|
|
|
05-09-2016, 09:29 PM
|
#12 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
thank you, I still hope to have the body back on this frame buy at least the end of may, just in time for the heat here to kick in. but I will try to get out in the morning and get some things taken care of
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
05-17-2016, 09:57 PM
|
#13 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
well today I was able to pick up my tires and wheels , I will try to get some pictures loaded in the next few min.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
|
06-12-2016, 08:49 PM
|
#14 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,644
|
Re: my new 64 tonka
Nice looking panel. Wish we could find them that clean down here
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
06-12-2016, 10:07 PM
|
#15 |
|
Registered User
Join Date: Jul 2011
Location: Scottsdale Az.
Posts: 325
|
Re: my new 64 tonka
thanks , I was hoping to have the body back on the frame, but due to other things going on it did not happen maybe in like 4 weeks.
__________________
1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
