I figure it's about that time.. - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skoffice · 07-01-2011, 11:46 PM

Here you go fellas! Latest as of today before the exhaust shop. Pick it up tomorrow morning. My bed need some serious attention

so don't mind that haha

**Captainfab** · 07-02-2011, 01:01 AM

I don't know if I missed it somewhere, but I'm curious what you've done on the tail of your transmission here.

Was this originally a 4wd trans?

skoffice · 07-02-2011, 04:40 AM

Yes it was a 4wd trans, and it has only 10k on it so my boss and I made a tail housing on the lathe and mill that allows for the yoke bushing, VSS, and standard 2wd mount. It's quite short but being a 2 piece drive shaft, the slip movement wasn't an issue. Rather than source another trans with the same amount of miles, or tear it all apart to convert it, we machined a couple chunks of aluminum.

**Captainfab** · 07-03-2011, 12:39 AM

That's interesting.....

So the output shaft was the correct size and spline and also tapped for a bolt on yoke?

You guys did a very nice job. You know there might ba a market for something like this. In my area about 95% of the newer trucks, Burbs, Tahoe's, etc. are all 4wd. So finding a 2wd trans isn't all that easy.

skoffice · 07-03-2011, 02:37 PM

It's a standard 27 spline slip yoke that I have on there, so it's not tapped its a slip, but now that you mention it you could do a tapped yoke with a slip shaft if it's a one-piece and it would work great. The shaft on the 4wd trans is significantly shorter, so It only has a possibility of maybe 1" of total slip. I had thought about the idea of making the part, but unless we could get everything CNC'd for a good deal, it would be more cost effective to just buy another trans almost haha. There's almost $300 in materials alone there.

Joemomma1 · 07-07-2011, 02:37 AM

Man you guys have some skills. looks good.

skoffice · 08-26-2011, 04:11 PM

I've been drivin it around town now. Need some more tuning but damn it's fun and it rides sooo nice!

Nice pose Bob..

And here's my friend's NASTY 408 we just finished at the shop.

redneck6 · 08-27-2011, 02:05 AM

just freaking awsome i love every bitt of this build . love the stance and the pro street look of it .

skoffice · 08-27-2011, 02:18 PM

Thanks! It's been a blast to drive. It sounds like a new vette when you get on it haha some people have been giving me confused looks

SCOTI · 08-27-2011, 03:08 PM

What the heck is up w/the color choice on that motor ^^. Just say 'nooooooooooooooo' to pink.

shrunken66stroker · 08-27-2011, 05:06 PM

Great work. I'll keep and eye out for progress.

DRTYRAT30 · 08-27-2011, 11:40 PM

Very cool.. I think i spotted you heading south on 99 outta Sac, near Florin? It caught my eye....

skoffice · 08-30-2011, 02:16 AM

Thanks for the compliments, now I just need to get this body work over and done with! DRTYRAT, that was me, headin back from Tognottis. We'll have to meet up one of these days. Don't people meet up at the A&W on wednesdays in Lodi? Scoti, that's my buddy's motor for his 67 GMC, it's going to be all black with just pink block and trans. Cuz it's a sissy

skoffice · 11-03-2011, 10:11 PM

Ok well, its done! I'll post more pics later.

jas89 · 12-18-2012, 05:08 PM

I know this thread is more than a year old, but I wanted to know what kind of seats you used and how hard of an install it was? Would they fit into a '73 C10?

bandite · 10-18-2018, 07:05 PM

hey please make me one of these transmission adaptors I like you got a very low milage trans .only 3200 miles but need it to be 2 wheel drive jessie 4329351314

bandite · 10-18-2018, 07:06 PM

will you build one of those adaptors seems like there are a lot of peeps that can use one

68Gold/white · 10-20-2018, 06:07 PM

Quote:

Originally Posted by bandite

will you build one of those adaptors seems like there are a lot of peeps that can use one

Some peeps might buy one or two, just to have for future use!!!

07-01-2011, 11:46 PM	#101
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. Here you go fellas! Latest as of today before the exhaust shop. Pick it up tomorrow morning. My bed need some serious attention so don't mind that haha __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

07-02-2011, 01:01 AM	#102
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: I figure it's about that time.. I don't know if I missed it somewhere, but I'm curious what you've done on the tail of your transmission here. Was this originally a 4wd trans? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-02-2011, 04:40 AM	#103
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. Yes it was a 4wd trans, and it has only 10k on it so my boss and I made a tail housing on the lathe and mill that allows for the yoke bushing, VSS, and standard 2wd mount. It's quite short but being a 2 piece drive shaft, the slip movement wasn't an issue. Rather than source another trans with the same amount of miles, or tear it all apart to convert it, we machined a couple chunks of aluminum. __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

07-03-2011, 12:39 AM	#104
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: I figure it's about that time.. That's interesting..... So the output shaft was the correct size and spline and also tapped for a bolt on yoke? You guys did a very nice job. You know there might ba a market for something like this. In my area about 95% of the newer trucks, Burbs, Tahoe's, etc. are all 4wd. So finding a 2wd trans isn't all that easy. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-03-2011, 02:37 PM	#105
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. It's a standard 27 spline slip yoke that I have on there, so it's not tapped its a slip, but now that you mention it you could do a tapped yoke with a slip shaft if it's a one-piece and it would work great. The shaft on the 4wd trans is significantly shorter, so It only has a possibility of maybe 1" of total slip. I had thought about the idea of making the part, but unless we could get everything CNC'd for a good deal, it would be more cost effective to just buy another trans almost haha. There's almost $300 in materials alone there. __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

07-07-2011, 02:37 AM	#106
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 812	Re: I figure it's about that time.. Man you guys have some skills. looks good.

08-26-2011, 04:11 PM	#107
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. I've been drivin it around town now. Need some more tuning but damn it's fun and it rides sooo nice! Nice pose Bob.. And here's my friend's NASTY 408 we just finished at the shop. __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

08-27-2011, 02:05 AM	#108
redneck6 Registered User Join Date: Jul 2009 Location: sparks nv Posts: 142	Re: I figure it's about that time.. just freaking awsome i love every bitt of this build . love the stance and the pro street look of it . __________________ 64 chevy c10 swb fleet small back window , in progress 454/400 swap , disc front disc rear , and just geting it on the road . 09 ford f350 cc swb 4x4 6.4l , to haul the others home . 2011 chevy hhr not mine but love the milage ..

08-27-2011, 02:18 PM	#109
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. Thanks! It's been a blast to drive. It sounds like a new vette when you get on it haha some people have been giving me confused looks __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

08-27-2011, 03:08 PM	#110
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: I figure it's about that time.. What the heck is up w/the color choice on that motor ^^. Just say 'nooooooooooooooo' to pink. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-27-2011, 05:06 PM	#111
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: I figure it's about that time.. Great work. I'll keep and eye out for progress. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

08-27-2011, 11:40 PM	#112
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: I figure it's about that time.. Very cool.. I think i spotted you heading south on 99 outta Sac, near Florin? It caught my eye....

08-30-2011, 02:16 AM	#113
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. Thanks for the compliments, now I just need to get this body work over and done with! DRTYRAT, that was me, headin back from Tognottis. We'll have to meet up one of these days. Don't people meet up at the A&W on wednesdays in Lodi? Scoti, that's my buddy's motor for his 67 GMC, it's going to be all black with just pink block and trans. Cuz it's a sissy __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

11-03-2011, 10:11 PM	#114
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: I figure it's about that time.. Ok well, its done! I'll post more pics later. __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

12-18-2012, 05:08 PM	#115
jas89 Registered User Join Date: Dec 2012 Location: Elk Grove, CA Posts: 9	Re: I figure it's about that time.. I know this thread is more than a year old, but I wanted to know what kind of seats you used and how hard of an install it was? Would they fit into a '73 C10?



Register or Log In To remove these advertisements.

10-18-2018, 07:05 PM	#116
bandite Registered User Join Date: Oct 2018 Location: big spring Posts: 2	Re: I figure it's about that time.. hey please make me one of these transmission adaptors I like you got a very low milage trans .only 3200 miles but need it to be 2 wheel drive jessie 4329351314

10-18-2018, 07:06 PM	#117
bandite Registered User Join Date: Oct 2018 Location: big spring Posts: 2	Re: I figure it's about that time.. will you build one of those adaptors seems like there are a lot of peeps that can use one

Register or Log In To remove these advertisements.