off it goes - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

K20chevy · 02-08-2015, 04:56 PM

[QUOTE=CHROMAHOLIC;7027141]^^lol, thanks guys...we've been test fitting the wiring so not many new pics, we did the cable driven wipers mounted (hopefully I will never need them but better to be safe then sorry) went cable driven so wiper motor could be hid in cowl area.. We did finish up the rear splash pans, just wanted something to hide compressors and tank but still let in air flow to cool the compressors yet quite them down a bit. Also have a drain for the water trap in the one splash pan and then a drain cock for the tank, both done so things can be drained without removing the splash pans

Would you be willing to do another set of the mesh stainless steel cover? And if so, PM me with details. Thank you!

CHROMAHOLIC · 02-08-2015, 05:02 PM

I would but the problem with making you one is that we actually changed the cowl holes to make them a little more symmetrical. So it most likely wouldn't line up with the stock holes....

K20chevy · 02-08-2015, 05:19 PM

Quote:

Originally Posted by CHROMAHOLIC

I would but the problem with making you one is that we actually changed the cowl holes to make them a little more symmetrical. So it most likely wouldn't line up with the stock holes....

Hm... is there any way you could make one for the stock holes?

CHROMAHOLIC · 02-21-2015, 08:17 AM

lol, thanks guys

CHROMAHOLIC · 02-21-2015, 08:48 AM

Sorry....I probably couldn't make a factory cowl screen now, just due to the fact that I don't have a template to work from. We tried a couple of variations of templates to see what we thought looked the best, I initially in my mind wanted two pieces but once we laid it out on the truck I didn't like how one wiper wasn't behind the cowl and one wasn't. (I'm funny that way, some call it a sickness, lol)
So I really don't have anyway of making one without a template to work from. We changed the hole shapes, sizes and stretched it farther to the drivers side...

Factory

Stretched farther to drivers side

What I had thought I wanted ( 2 Piece )

Ohchiiit · 02-21-2015, 09:47 AM

very very impressive build! your truck is what dreams are made of! hope theres a young child in the family that will have the opportunity to show and tell the unborn hot rodders just how cool his dad/grandfather was back in 2015! BADA$$ RIDE!

**Hart_Rod** · 02-21-2015, 10:02 AM

Impressive build. Can't wait to see it finished.

CHROMAHOLIC · 02-21-2015, 10:31 AM

thanks guys.....

CHROMAHOLIC · 02-28-2015, 09:18 PM

Brake lines are just about done....from reservoir down the firewall through the top of the frame rail

Machined out new rear fender braces, instead of the bolt going through the eyelet we machined these and tapped the bottom so this way they hold the fender with a stainleless button head through the bottom of the fender

mooseknuckles · 02-28-2015, 09:25 PM

Sick!!

y5mgisi · 02-28-2015, 09:42 PM

Never a cut corner. Great stuff.

**Gregski** · 03-01-2015, 03:47 AM

Chip? Chip Foose, is that you, LOL, jk!

CHROMAHOLIC · 03-01-2015, 06:01 AM

lol, thanks guys....

nickbwilson · 03-19-2015, 02:20 PM

Beautiful build so far my question is where did you get your cold air intake parts from the tubing????

CHROMAHOLIC · 03-19-2015, 06:24 PM

thanks
http://vibrantperformance.com/catalo...dcf3425151e4dc

nickbwilson · 03-24-2015, 04:27 PM

Did you buy A 90 and weld a piece of straight pipe off the 90 over to the inner fender well, just asking because the intake tube coming out of the throttle body looks like its a solid piece then you welded the end on where it goes from shiny to scuffed up? thanks for all your help

RebelSoldier · 03-24-2015, 05:03 PM

It looks badass. Love the wheels.

CHROMAHOLIC · 03-24-2015, 07:31 PM

one piece from throttle body to where it's scuffed, then we welded a 90 into the fender

CHROMAHOLIC · 03-24-2015, 07:32 PM

Quote:

Originally Posted by RebelSoldier

It looks badass. Love the wheels.

thanks

ajgriffin · 05-09-2015, 12:07 AM

Any updates?

CHROMAHOLIC · 05-09-2015, 06:56 AM

Quote:

Originally Posted by ajgriffin

Any updates?

Not really any pics to post, we've pretty much have it all wired, exhaust just showed up...so time to start fabbing it up. After exhaust it's tear down and paint. Actually took a month off on the build, just to relax, re-coop, refill the wallet, lol. Sometimes on big projects like this a break from it is nice....we are building our own exhaust so I'll post pics soon. Thanks for the interest in the project
Posted via Mobile Device

68Timber · 05-09-2015, 09:32 AM

I just noticed the brake line loop tucked under the firewall. Cool detail.

66Slabside · 05-16-2015, 10:13 AM

Just invested a Sat morning reading this instead of working on my own car (no I don't have a truck yet but it's my next project.) Everything that could be said has been said about the level and quality of this build. Subscribed and in for the long run. i mean who cares if it takes 5 years, it'll still be way better than most guys who take ten years to build a truck.
Thanks for sharing.

CHROMAHOLIC · 05-16-2015, 01:04 PM

Quote:

Originally Posted by 66Slabside

Just invested a Sat morning reading this instead of working on my own car (no I don't have a truck yet but it's my next project.) Everything that could be said has been said about the level and quality of this build. Subscribed and in for the long run. i mean who cares if it takes 5 years, it'll still be way better than most guys who take ten years to build a truck.
Thanks for sharing.

Thanks for the compliments....we're getting there, slow but steady....stay tuned we'll have some exhaust pics coming soon
Posted via Mobile Device

CHROMAHOLIC · 05-17-2015, 07:38 AM

first time motor has been in the truck with the fuel rail cover on

02-08-2015, 04:56 PM	#801
K20chevy Registered User Join Date: Oct 2012 Location: Pittsfield, ME Posts: 477	Re: off it goes [QUOTE=CHROMAHOLIC;7027141]^^lol, thanks guys...we've been test fitting the wiring so not many new pics, we did the cable driven wipers mounted (hopefully I will never need them but better to be safe then sorry) went cable driven so wiper motor could be hid in cowl area.. We did finish up the rear splash pans, just wanted something to hide compressors and tank but still let in air flow to cool the compressors yet quite them down a bit. Also have a drain for the water trap in the one splash pan and then a drain cock for the tank, both done so things can be drained without removing the splash pans Would you be willing to do another set of the mesh stainless steel cover? And if so, PM me with details. Thank you! __________________ 78 Chevy K20 Custom Deluxe, build: http://67-72chevytrucks.com/vboard/s...d.php?t=612104 68 Chevy K20 Panel truck, build: http://67-72chevytrucks.com/vboard/s...41#post7263441

02-08-2015, 05:02 PM	#802
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes I would but the problem with making you one is that we actually changed the cowl holes to make them a little more symmetrical. So it most likely wouldn't line up with the stock holes....

02-21-2015, 08:17 AM	#804
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes lol, thanks guys

02-21-2015, 08:48 AM	#805
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Sorry....I probably couldn't make a factory cowl screen now, just due to the fact that I don't have a template to work from. We tried a couple of variations of templates to see what we thought looked the best, I initially in my mind wanted two pieces but once we laid it out on the truck I didn't like how one wiper wasn't behind the cowl and one wasn't. (I'm funny that way, some call it a sickness, lol) So I really don't have anyway of making one without a template to work from. We changed the hole shapes, sizes and stretched it farther to the drivers side... Factory Stretched farther to drivers side What I had thought I wanted ( 2 Piece )

02-21-2015, 09:47 AM	#806
Ohchiiit Registered User Join Date: Feb 2015 Location: Huntsville Posts: 72	Re: off it goes very very impressive build! your truck is what dreams are made of! hope theres a young child in the family that will have the opportunity to show and tell the unborn hot rodders just how cool his dad/grandfather was back in 2015! BADA$$ RIDE!

02-21-2015, 10:02 AM	#807
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: off it goes Impressive build. Can't wait to see it finished. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-21-2015, 10:31 AM	#808
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes thanks guys.....

02-28-2015, 09:18 PM	#809
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Brake lines are just about done....from reservoir down the firewall through the top of the frame rail Machined out new rear fender braces, instead of the bolt going through the eyelet we machined these and tapped the bottom so this way they hold the fender with a stainleless button head through the bottom of the fender

02-28-2015, 09:25 PM	#810
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: off it goes Sick!! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-28-2015, 09:42 PM	#811
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: off it goes Never a cut corner. Great stuff. __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

03-01-2015, 03:47 AM	#812
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: off it goes Chip? Chip Foose, is that you, LOL, jk!

03-01-2015, 06:01 AM	#813
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes lol, thanks guys....

03-19-2015, 02:20 PM	#814
nickbwilson Registered User Join Date: Apr 2008 Location: columbus indiana Posts: 86	Re: off it goes Beautiful build so far my question is where did you get your cold air intake parts from the tubing????

03-19-2015, 06:24 PM	#815
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes thanks http://vibrantperformance.com/catalo...dcf3425151e4dc

03-24-2015, 04:27 PM	#816
nickbwilson Registered User Join Date: Apr 2008 Location: columbus indiana Posts: 86	Re: off it goes Did you buy A 90 and weld a piece of straight pipe off the 90 over to the inner fender well, just asking because the intake tube coming out of the throttle body looks like its a solid piece then you welded the end on where it goes from shiny to scuffed up? thanks for all your help



Register or Log In To remove these advertisements.

03-24-2015, 05:03 PM	#817
RebelSoldier Registered User Join Date: Jun 2013 Location: Southaven, MS Posts: 29	Re: off it goes It looks badass. Love the wheels.

03-24-2015, 07:31 PM	#818
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes one piece from throttle body to where it's scuffed, then we welded a 90 into the fender

05-09-2015, 12:07 AM	#820
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: off it goes Any updates? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

05-09-2015, 09:32 AM	#822
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: off it goes I just noticed the brake line loop tucked under the firewall. Cool detail. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

05-16-2015, 10:13 AM	#823
66Slabside Registered User Join Date: Sep 2014 Location: Peachtree City Georgia Posts: 26	Re: off it goes Just invested a Sat morning reading this instead of working on my own car (no I don't have a truck yet but it's my next project.) Everything that could be said has been said about the level and quality of this build. Subscribed and in for the long run. i mean who cares if it takes 5 years, it'll still be way better than most guys who take ten years to build a truck. Thanks for sharing.

05-17-2015, 07:38 AM	#825
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes first time motor has been in the truck with the fuel rail cover on

Register or Log In To remove these advertisements.