OR Parting out 72 C20 350 AT a few nice parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vova · 01-31-2014, 12:23 PM

Quote:

Originally Posted by tll74

Vova, Both sides? I have some off I'll look at them.

Yes both sides.

**jocko** · 01-31-2014, 12:33 PM

Tom - 350 block and heads condition? Any idea how many times bored? If decent, pls post the numbers for it - the stamp pad, and Eng suffix code. Thank you!

muckmuck · 01-31-2014, 01:41 PM

Put me in line for door panels if bertvert passes.

terry b · 01-31-2014, 06:10 PM

Hi. Are you selling the windsheld mounted rear view mirror? I would like it if you are.

**tll74** · 02-01-2014, 01:53 AM

CUSTOM/10 Gary, I'll get a shipping cost and this door relay is bad too.

sflem61, THANKS!

Tigg, The column looked very nice but it didn't seem to shift correctly. I have another in my next truck to part which is a 72 as well. It is also black. 100.00 shipped.

jocko, The block is standard and never been apart till now. It is 4 bolt main and has nodular main caps. I have hot tanked it and ready for the machine shop. The heads are not original to the 72 as they have a 73 date code. They are 1.72-1.6 valves. The heads look to be just fine. I have many more blocks and heads if this is not what your looking for. pics below

muckmuck, Ok

terry b Terry, I sold the cab and forgot to save it.

**tll74** · 02-01-2014, 02:10 AM

block pics

Juarez823 · 02-01-2014, 02:51 AM

How's the battery tray?

72CampSpecial · 02-01-2014, 03:32 AM

Tom..how much for left hand (drivers side) Window Regulator? Im interested if it rolls up/down smooth. I also need the left hand window handle that rolls it up/down.. broke mine..again. (think its time to change the regulator and stop breaking handles!)

Cost for both shipped to 98439

Kennuck · 02-01-2014, 08:43 AM

Interested in the pair of rotor stone shields. How much to ship to 48060
Thanks

Kennuck · 02-01-2014, 08:45 AM

Just noticed this is from a C20 are the rotor shields the same for a C10?

**thelonerife** · 02-01-2014, 11:22 AM

If the tail light housings haven't been spoken for I'd like a quote shipped to 37043. Could you check the bulb sockets/screw holes to see if they're good too? Thanks. Chuck.

pm me as I may forget to check back. thx

jeh · 02-01-2014, 03:58 PM

Do you have a hood latch part that bolts on the hood itself?

**tll74** · 02-02-2014, 02:58 AM

Juarez823, Looks good so far. I put put in the dip tank to remove the rust in the tray. I'll post pics hopefully Monday.

72CampSpecial, 43.00 shipped. Good rollers and works just fine.

Kennuck, The C20 is different from the C10. I have the C10 shields as well same cost.

thelonerife Chuck, 17.50 for the pair 10.00 shipping

jeh, Yea lots of them. 10.00 plus 6.00 shipping.

ChevyChaser · 02-02-2014, 03:45 AM

I am up in Yakima, WA. I am looking for a radiator to fit my 71 k20. Also, interested in your steel wheels. What size are they? (will they fit over front disc brakes)

jjzepplin · 02-02-2014, 04:17 AM

could I get some more pics of the rear patch panels? May take both.

**tll74** · 02-02-2014, 04:22 AM

Quote:

Originally Posted by ChevyChaser

I am up in Yakima, WA. I am looking for a radiator to fit my 71 k20. Also, interested in your steel wheels. What size are they? (will they fit over front disc brakes)

I have many. 3 or 4 core large tank and 3 core small tank.
4 core original Harrison 100.00 plus shipping
3 core large tank original Harrison 80.00 plus
3 core small tank original Harrison 80.00 plus

The wheels off this truck have been scraped. Are you looking for 16" stock wheels? Thanks, Tom

**tll74** · 02-02-2014, 04:23 AM

Quote:

Originally Posted by jjzepplin

could I get some more pics of the rear patch panels? May take both.

Sure but it would be monday before I can get pics.

Kennuck · 02-02-2014, 10:14 AM

Cost to ship C10 disc brake stone shields to 48060 please.

ChevyChaser · 02-02-2014, 12:33 PM

I have a four core cross flow now, but its leaking and may be cheaper to replace vs repair.

I am looking for a steel wheel that I can powder white and put stainless beauty rings on. I like the idea of 16-17", but it needs to be 8 lug and pretty wide to fit 33x12.5 tires.

I am also interested in the linkage to operate the passenger side fresh air vent and knobs for both, and whatever bench seat cables/springs connect from the driver side seat slide adj handle over to the passenger side.

**tll74** · 02-02-2014, 01:16 PM

Kennuck, My bad I should have posted that last night. Half asleep I guess. 30.00 on the shields and 13.00 shipping.

ChevyChaser, I send all my radiators out to a rad shop to have them tested and given a clean bill of health. Just LMK
I don't have any steelies right now for the 33x12.50 tires.
Yes on the vent pull and both knobs. 7.00 with both knobs. They are pictured in post 7 of this thread. I do have the cable/rod but only with seat tracks.

Thanks, Tom

**thelonerife** · 02-02-2014, 04:27 PM

I found mine thanks for the quote.

**tll74** · 02-02-2014, 04:44 PM

CUSTOM/10, Shipping on the shields is 13.60

Kennuck · 02-02-2014, 07:46 PM

Quote:

Originally Posted by tll74

Kennuck, My bad I should have posted that last night. Half asleep I guess. 30.00 on the shields and 13.00 shipping.

ChevyChaser, I send all my radiators out to a rad shop to have them tested and given a clean bill of health. Just LMK
I don't have any steelies right now for the 33x12.50 tires.
Yes on the vent pull and both knobs. 7.00 with both knobs. They are pictured in post 7 of this thread. I do have the cable/rod but only with seat tracks.

Thanks, Tom

I will take the C10 disc brake shields Please send paypal info.
Thanks

warbucket · 02-02-2014, 08:16 PM

I'm interested in the steering intermedate shaft, will it fit my 72 4x4 blazer ?

**tll74** · 02-02-2014, 08:46 PM

Kennuck, PM coming

warbucket, Yes, It is the same.

Thanks, Tom

01-31-2014, 12:33 PM	#27
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,934	Re: Parting out 72 C20 350 AT a few nice parts Tom - 350 block and heads condition? Any idea how many times bored? If decent, pls post the numbers for it - the stamp pad, and Eng suffix code. Thank you!

01-31-2014, 01:41 PM	#28
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Parting out 72 C20 350 AT a few nice parts Put me in line for door panels if bertvert passes.

01-31-2014, 06:10 PM	#29
terry b Registered User Join Date: Oct 2011 Location: jackson michigan Posts: 755	Re: Parting out 72 C20 350 AT a few nice parts Hi. Are you selling the windsheld mounted rear view mirror? I would like it if you are.

02-01-2014, 01:53 AM	#30
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts CUSTOM/10 Gary, I'll get a shipping cost and this door relay is bad too. sflem61, THANKS! Tigg, The column looked very nice but it didn't seem to shift correctly. I have another in my next truck to part which is a 72 as well. It is also black. 100.00 shipped. jocko, The block is standard and never been apart till now. It is 4 bolt main and has nodular main caps. I have hot tanked it and ready for the machine shop. The heads are not original to the 72 as they have a 73 date code. They are 1.72-1.6 valves. The heads look to be just fine. I have many more blocks and heads if this is not what your looking for. pics below muckmuck, Ok terry b Terry, I sold the cab and forgot to save it. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 02-01-2014 at 02:12 AM.

02-01-2014, 02:10 AM	#31
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts block pics Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-01-2014, 02:51 AM	#32
Juarez823 Registered User Join Date: Mar 2011 Location: Corvallis, Or Posts: 78	Re: Parting out 72 C20 350 AT a few nice parts How's the battery tray?

02-01-2014, 03:32 AM	#33
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: Parting out 72 C20 350 AT a few nice parts Tom..how much for left hand (drivers side) Window Regulator? Im interested if it rolls up/down smooth. I also need the left hand window handle that rolls it up/down.. broke mine..again. (think its time to change the regulator and stop breaking handles!) Cost for both shipped to 98439

02-01-2014, 08:43 AM	#34
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Parting out 72 C20 350 AT a few nice parts Interested in the pair of rotor stone shields. How much to ship to 48060 Thanks __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

02-01-2014, 08:45 AM	#35
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Parting out 72 C20 350 AT a few nice parts Just noticed this is from a C20 are the rotor shields the same for a C10? __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

02-01-2014, 11:22 AM	#36
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting out 72 C20 350 AT a few nice parts If the tail light housings haven't been spoken for I'd like a quote shipped to 37043. Could you check the bulb sockets/screw holes to see if they're good too? Thanks. Chuck. pm me as I may forget to check back. thx __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-01-2014, 03:58 PM	#37
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Parting out 72 C20 350 AT a few nice parts Do you have a hood latch part that bolts on the hood itself? __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

02-02-2014, 02:58 AM	#38
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts Juarez823, Looks good so far. I put put in the dip tank to remove the rust in the tray. I'll post pics hopefully Monday. 72CampSpecial, 43.00 shipped. Good rollers and works just fine. Kennuck, The C20 is different from the C10. I have the C10 shields as well same cost. thelonerife Chuck, 17.50 for the pair 10.00 shipping jeh, Yea lots of them. 10.00 plus 6.00 shipping. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 03:45 AM	#39
ChevyChaser Registered User Join Date: Dec 2011 Location: Yakima, WA Posts: 8	Re: Parting out 72 C20 350 AT a few nice parts I am up in Yakima, WA. I am looking for a radiator to fit my 71 k20. Also, interested in your steel wheels. What size are they? (will they fit over front disc brakes)

02-02-2014, 04:17 AM	#40
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,546	Re: Parting out 72 C20 350 AT a few nice parts could I get some more pics of the rear patch panels? May take both. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-02-2014, 10:14 AM	#43
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Parting out 72 C20 350 AT a few nice parts Cost to ship C10 disc brake stone shields to 48060 please. __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear



Register or Log In To remove these advertisements.

02-02-2014, 12:33 PM	#44
ChevyChaser Registered User Join Date: Dec 2011 Location: Yakima, WA Posts: 8	Re: Parting out 72 C20 350 AT a few nice parts I have a four core cross flow now, but its leaking and may be cheaper to replace vs repair. I am looking for a steel wheel that I can powder white and put stainless beauty rings on. I like the idea of 16-17", but it needs to be 8 lug and pretty wide to fit 33x12.5 tires. I am also interested in the linkage to operate the passenger side fresh air vent and knobs for both, and whatever bench seat cables/springs connect from the driver side seat slide adj handle over to the passenger side.

02-02-2014, 01:16 PM	#45
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts Kennuck, My bad I should have posted that last night. Half asleep I guess. 30.00 on the shields and 13.00 shipping. ChevyChaser, I send all my radiators out to a rad shop to have them tested and given a clean bill of health. Just LMK I don't have any steelies right now for the 33x12.50 tires. Yes on the vent pull and both knobs. 7.00 with both knobs. They are pictured in post 7 of this thread. I do have the cable/rod but only with seat tracks. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 04:27 PM	#46
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting out 72 C20 350 AT a few nice parts I found mine thanks for the quote. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-02-2014, 04:44 PM	#47
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts CUSTOM/10, Shipping on the shields is 13.60 __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 08:16 PM	#49
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: Parting out 72 C20 350 AT a few nice parts I'm interested in the steering intermedate shaft, will it fit my 72 4x4 blazer ?

02-02-2014, 08:46 PM	#50
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 C20 350 AT a few nice parts Kennuck, PM coming warbucket, Yes, It is the same. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

Register or Log In To remove these advertisements.