LS2 Custom Engine Cladding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 05-03-2016, 09:01 AM

This may have been done before, but it's the first time I have ever tried it.

A friend of mine asked me to "customize" the GTO covers for his LS2 engine. He is installing the engine into his '67 C10 fleet, and was looking for something different.

He furnished two damaged GTO claddings for dissection and two new GTO claddings to modify. After many hours with the Dremel, Super Glue Plastic Fusion Epoxy, spot putty, sandpaper and semi-flat black here is the final result.

The toughest areas to reshape was inside the "G" because of the slight curves.

I would never do another set. Just too much time and patience which I don't have.

POP

05-03-2016, 09:01 AM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	LS2 Custom Engine Cladding This may have been done before, but it's the first time I have ever tried it. A friend of mine asked me to "customize" the GTO covers for his LS2 engine. He is installing the engine into his '67 C10 fleet, and was looking for something different. He furnished two damaged GTO claddings for dissection and two new GTO claddings to modify. After many hours with the Dremel, Super Glue Plastic Fusion Epoxy, spot putty, sandpaper and semi-flat black here is the final result. The toughest areas to reshape was inside the "G" because of the slight curves. I would never do another set. Just too much time and patience which I don't have. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.