How do I remove fender emblems>???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

~72'Pete~ · 01-10-2003, 06:31 PM

I am not sure how to remove the "Custom 10" emblems from my truck, as they need a fresh coat of paint. ANyone know how?

Thanks ~72~Pete

PS what u guys think of the clear side markers?

JoetheMobster · 01-10-2003, 06:39 PM

Not quite sure about the emblems (well, none you'd want to hear anyway!

), but you have a damn nice truck there!

DanoDMano · 01-10-2003, 06:43 PM

I emoved the inner fender wells. It made it a snap, and I painted the inside of the wells when I had them out!!

~72'Pete~ · 01-10-2003, 11:23 PM

do they even come off?

67cst · 01-10-2003, 11:35 PM

yeah, there is i think 2 bolts on yours, there were 4 on each side of the 67. i think its like a 1/4" nut or somethin, guys have said that you need to do it without an inner fender, you cant acess those nuts on the inside of the fender unless you remove your inner fender...which leads me to a question, after you paint your truck how do you put new badges on without having to take your front clip apart????

mikep · 01-10-2003, 11:47 PM

68's are even harder to get off and on again. I went down to the hardware store and picked up some clips like the one used on the trim piece around the tailgate latch. You know, the tube type spring clips that plop into the holes . I got 4 for each side and then just pushed the trim pieces into place. They are very solidly retained but can still be removed ( slowly and with some dificulty ) without taking the ineer fender wells out.

jhow66 · 01-10-2003, 11:51 PM

I got mine off be taping a wrench to a paint paddle and a lot of &%^@#*$. To install I purchased some what I call capture inserts that push in and lock in the holes. Then the emblem posts just snap into these. They can be bought at nut & bolt supply house. (come in different sizes) Also I put a small washer on the post so that the emblem sits off the surface of the fender the thickness of the washer. ( no dirt build up behind it)

KWTRUX · 01-11-2003, 12:03 PM

DANG I LIKE THE PICKUP CAN SOMEONE CHANGE THE COLOR TO MET SILVER WITH A BLACK TOP FOR ME?I THINK THAT IS WHAT COLOR I WANT TO PAINT MY 71 C10

01-10-2003, 06:31 PM	#1
~72'Pete~ Registered User Join Date: Nov 2002 Location: California Posts: 139	How do I remove fender emblems>???? I am not sure how to remove the "Custom 10" emblems from my truck, as they need a fresh coat of paint. ANyone know how? Thanks ~72~Pete PS what u guys think of the clear side markers?

01-10-2003, 06:39 PM	#2
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	Not quite sure about the emblems (well, none you'd want to hear anyway! ), but you have a damn nice truck there! __________________ 2007 Saturn Aura - hey it WAS a GM product

01-10-2003, 06:43 PM	#3
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	I emoved the inner fender wells. It made it a snap, and I painted the inside of the wells when I had them out!! __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

01-10-2003, 11:23 PM	#4
~72'Pete~ Registered User Join Date: Nov 2002 Location: California Posts: 139	ttt do they even come off?

01-10-2003, 11:35 PM	#5
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	yeah, there is i think 2 bolts on yours, there were 4 on each side of the 67. i think its like a 1/4" nut or somethin, guys have said that you need to do it without an inner fender, you cant acess those nuts on the inside of the fender unless you remove your inner fender...which leads me to a question, after you paint your truck how do you put new badges on without having to take your front clip apart???? __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

01-10-2003, 11:47 PM	#6
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	68's are even harder to get off and on again. I went down to the hardware store and picked up some clips like the one used on the trim piece around the tailgate latch. You know, the tube type spring clips that plop into the holes . I got 4 for each side and then just pushed the trim pieces into place. They are very solidly retained but can still be removed ( slowly and with some dificulty ) without taking the ineer fender wells out. __________________ No truck :-(

01-10-2003, 11:51 PM	#7
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	I got mine off be taping a wrench to a paint paddle and a lot of &%^@#*$. To install I purchased some what I call capture inserts that push in and lock in the holes. Then the emblem posts just snap into these. They can be bought at nut & bolt supply house. (come in different sizes) Also I put a small washer on the post so that the emblem sits off the surface of the fender the thickness of the washer. ( no dirt build up behind it) __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

01-11-2003, 12:03 PM	#8
KWTRUX Registered User Join Date: Nov 2002 Location: NEBRASKA Posts: 188	DANG I LIKE THE PICKUP CAN SOMEONE CHANGE THE COLOR TO MET SILVER WITH A BLACK TOP FOR ME?I THINK THAT IS WHAT COLOR I WANT TO PAINT MY 71 C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.