Camaro Caliper Brackets

[Captainfab]

No they do not

'93-'97 F-body calipers as listed in the first post.......

Originally Posted by JustN

these use the 00 camaro/firebird calipers right?

[ryserstine]

I hope I didn't create any problems asking you this question here

[Captainfab]

Not a problem.

For clearance, I would like to see at least 1/2" between the driveshaft and the crossmember at the extremes of the suspension. By that I mean 1/2" at the top at full compression and 1/2" at the bottom at full extension. Your side clearance looks good from what I can see.

Originally Posted by ryserstine

I hope I didn't create any problems asking you this question here

[ryserstine]

Great I'm good then! Off to find some posts on setting up my pan hard bar,i love this site! Thanks again for the super parts and the info.

[ryserstine]

So captainfab whats a good year pickup to grab a disk/disk mastercylinder off of? Or does someone make one for my square body. Thanks

[Captainfab]

I beleive most guys are using the '77-'81 Corvette master cylinder

Originally Posted by ryserstine

So captainfab whats a good year pickup to grab a disk/disk mastercylinder off of? Or does someone make one for my square body. Thanks

[ryserstine]

Ok so 77-81 vette and it fits nothing else i'll need. I no i'll probably have to do some reflaring of brake lines, and an adjustable proportioning valve for the rear but my concern is the plunger size,and my existing proportioning valve. Leave it or get rid of it? Thanks mark

[Captainfab]

Yes the Corvette master cylinder will bolt right up. Just like most GM parts, there are a lot of master cylinders that are interchangeable.

You can try using your original proportioning valve with an adjustable valve in the rear circuit and see if that works for you. The other options would be to change to a disc/disc prop valve or the Wilwood #260-11179 prop valve which has a built in adjustable valve for the rear.

What do you mean by 'plunger'?

[dan468]

CPP has a bunch of valve options too that will work with the original brake warning switch

[snipescastle2]

ryserstine,
what is the bracket shown in this picture? or is that some sort of JIG for welding/fabrication? if you don't mind me asking?great work! that bracket caught my eye, just wondering what it's for.....
Ben

[Captainfab]

If you are talking about the bracket that is below and behind the caliper, that is the panhard bar mount that is on the NASCAR trailing arms.

[snipescastle2]

that's a pretty stout looking bracket, I was just wondering what it was for, never seen one of those before.....
Thanks Captainfab!
Ben

[ryserstine]

Sorry disregard plunger that would be an issue if i were to change out the brake booster,and it sounds like thats not needed.Thanks for the help i'll post more pics when completed.

[ls1nova71]

I need a set of these, but don't have time to read through 11 pages to find the price on the powder coated ones. I se a price for bare steel on the first page. I'll send a PM.

[Captainfab]

PM replied to

The satin black powder coating is an additional $28.00

Originally Posted by ls1nova71

I need a set of these, but don't have time to read through 11 pages to find the price on the powder coated ones. I se a price for bare steel on the first page. I'll send a PM.

[ls1nova71]

Think I'll go with the unpainted set. Will send PayPal right away. Thanks.

[bL.A.zer90045]

do you make any brackets to accomadate the 98-02 fbody calipers?

[crob35]

Will these work with the wilwood d52 calipers?

[Captainfab]

No, these only work with the '93-'97 F-body calipers. If you want to use the Wilwood D52 calipers, you will need my D52 brackets.

Originally Posted by crob35

Will these work with the wilwood d52 calipers?

[dan468]

Regarding the corvette MC, front reservoir goes to front brakes and rear to rear? Just did my 64 lincoln and it was opposite so I thought I'd ask

[Captainfab]

I believe that is correct, but I'll have to verify that. Are the fittings different sizes? I was thinking that the general rule was that on masters that have equal size reserviors, that the front is front brakes and the rear is rear brakes.

[dan468]

The rear port is the bigger one...

Thank you for making this bracket. It would have been much harder to make this work without it.

Search Keyword: Porterbuilt, dropmember, big block chevy

[HomoMonkey]

Hey CaptFab, want to order a bracket for Impala disc/Camaro caliper. sending paypal now.
Thanks

[Captainfab]

Payment received and email sent

Originally Posted by HomoMonkey

Hey CaptFab, want to order a bracket for Impala disc/Camaro caliper. sending paypal now.
Thanks

[weav1]

Are you still making these brackets