68 c10 6.5 turbo diesel

[marvgarr68]

Originally Posted by jbclassix

I have a 95 with the DS4. The advance won't work and no power with no smoke. I have a spare DS4 for the truck. I hope it's good

Might not be the IP.

[jbclassix]

The advance is locked up. The stepper motor is good... I'll post all the info in my thread

[marvgarr68]

Here are some of the parts I got. I rebuilt the starter i had to replaced the main terminal stud on it. I got the core support painted, holes cut for inter cooler hoses. I got rad/shroud painted, cleaned, and installed. I got all the steering in will get more pics of that. I had to modify the frame for power steering gear. Here are some pics.

[marvgarr68]

I also got the fuel lines done, pressure and return. Here are some more pics.

[marvgarr68]

Some more pics. There will be a lot of pics coming.

['68 Newtricks]

ahhh it's so close I can hear it!!

[marvgarr68]

Got some work done. I finally got the Fluid Damper and installed it. Crank pulley is installed so is the fan and the spacer. My buddy machined this spacer to my specs to get the fan were I wanted it. The spacer also adapts due to the wp hub being 3/4's and the fan pilot is 5/8's he made it very precise. I got the belt ran finally so that wraps up the front of the engine. I mounted the oil fill with new grommet in timing cover. I also welded a v band flange to the top intake and installed it. I have the ceramic coating for the exhaust manifolds I still have to finish them. I also installed the timing tab.

[marvgarr68]

Some more pictures.

[marvgarr68]

I also got the steering all wrapped up.

[Dieselwrencher]

Looking good. Is there not enough room for a fan clutch, or did you just not want to use one?

[marvgarr68]

No room for fan clutch.

[Dieselwrencher]

I was wondering if that was the issue.

[marvgarr68]

Should run cool not sure on the noise or mpg though.

[marvgarr68]

Got the exhaust manifolds all ceramic coated and turbine housing on turbo ceramic coated also ceramic coated all the manifold bolts. Also a pic of the top hat all finished.

[Lemield]

WOW! That sure looks NICE! I've said it before, you do nice work.

[marvgarr68]

Thanks. I really appreciate it.

[marvgarr68]

got injector return lines installed. I also got the ignition bezel and scratch guard installed. Also replaced the headlight knob and wiper knob.

[Dieselwrencher]

Nice work. Where'd the scratch guard come from?

[marvgarr68]

Brothers is where I bought it.

[Dieselwrencher]

Cool, thanks.

[marvgarr68]

Here are some pics of what I have done lately. The first pic is the circuit breaker for the glow plugs. Next is the oil pressure gauge line. The rest is the exhaust cross over I made and the v band flange I welded on to the turbo. I still need to ceramic coat the cross over and put the bottom connecting flange on.

[marvgarr68]

More of the cross over.

[marvgarr68]

Here is the turbo finally mounted, heat shield on, and turbo drain and oil supply line done. I also wired up all the glow plugs and made my own harness and in cased it in a heat sleeve good for 2000 deg.

[marvgarr68]

I got exhaust crossover ceramic coated and v band welded in.

[Dieselwrencher]

Nice work on it!