TX 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 12-07-2008, 06:44 PM

$500-Solid truck, the maroon paint is the original paint, no rust except for three or four very small pin holes behind rear wheel. The doors on this truck are very nice, only one (passenger side rear) scrape spot about 1/8" deep, 1/2 " wide and 6" long. Not even any door dings on the other three doors. The driver fender is very nice, the pass fender has two easily fixed dings, and the hood has two dents on the front passenger edge. The full floater rear axle shown in the pics has been sold. The radiator and hydroboost brake booster have been sold. The truck now has a 9 1/2" C clip rear axle under it so that it can be moved. It has a traditional vacuum power brake booster installed. The truck was originally 6.2 diesel/ 700 r4 truck. It now has no engine or trans. Maroon bench vinyl front seat needs cover, second seat good, no 3rd seat. Has rear AC, power windows and locks that all worked when parked. Very good tilt steering column with keys. Recently replaced u joints. Shocks pulled for another truck. One chip in windshield all other glass perfect. Clear Texas title in hand. The truck has a nice 86 model grille and headlight rings. I believe I still have the 82 grille and headlight rings in the barn. The stainless steel mirrors are in very very good condition. The truck is in Leander, Tx NW of Austin.

trenchwarfare · 12-07-2008, 08:33 PM

dash pad in decent shape?

**WIDESIDE72** · 12-08-2008, 11:02 AM

Sorry, dash pad is shot (cracked)

Wardworks · 12-10-2008, 12:06 PM

Can you send me a picture of the rear inner door panels.

Thanks,

Ron

hessian18 · 12-10-2008, 04:47 PM

Can I get some pictures of the 86 grille....

What would shipping be to 92345 ?

Thanks

**WIDESIDE72** · 12-10-2008, 10:19 PM

I already had pics of the door panels, but nothing up close of the grille. I will take grille pics tomorrow.

**WIDESIDE72** · 12-10-2008, 10:23 PM

The factory tint on the rear windows did a good job of preserving the plastic on the rear door panels. They are not sun baked, but not perfect either. They are slightly faded, but I will include both pieces of lower carpet, door handle trims, ash trays, window switches, arm rests and door lock pulls. I am asking $50 + shipping due to size.

**WIDESIDE72** · 12-10-2008, 10:34 PM

Pics of hood ornament $15 shipped to continental US $10 you pick up

*Stitch* · 12-10-2008, 10:34 PM

do you have the door inserts for the front doors and are they in good shape with all the mounting studs on the back...thanks...

Chuck.

*Stitch* · 12-10-2008, 10:38 PM

I'll take the hood ornament...I'll see if I can get my sister to pick it up if not I'll get you to ship it...thanks alot...

Chuck.

**WIDESIDE72** · 12-10-2008, 10:42 PM

The passenger side front door panel has never been off, and I haven't had the driver front door panel off in about 15 yrs, when replacing the electric window motor, so everything should be good. I am not sure what you mean by the door inserts... It has been a while since I had the panels off a 73-87 truck.

Front door panels are faded pretty badly, but I will include all pieces including two good door pull straps, 3 good plastic strap anchor covers (I have the fourth, but the little plastic clip that holds it on the door panel broke off), bottom carpet, power window and lock switches, door lock pulls, nice arm rests and map pockets. $50 shipped due to size

**WIDESIDE72** · 12-10-2008, 10:45 PM

$20 + shipping for velour inserts(only)on front doors. These are still in VERY nice condition. No stains or tears.

*Stitch* · 12-10-2008, 10:55 PM

never mind...the pieces I was talking about are where the door pull straps are and I'm looking for a set without the straps...thanks though...I still will take the hood ornament though...

Chuck.

**WIDESIDE72** · 12-12-2008, 08:27 PM

Quote:

Originally Posted by hessian18

Can I get some pictures of the 86 grille....

What would shipping be to 92345 ?

Thanks

$20 for grille + $20 shipping to 92345 ( I would have to buy a box.) BTW, this grille is for a 86 Custom Deluxe, which had the parking lights mounted in the bumper like the 82. I think around 84 or so, Chevy started putting the parking lights in the grille on Silverados. This grill does not have provisions to mount parking lights. In other words, it could be used in any 82-83, or 84+ Custom Deluxe as a direct swap. i also have the headlight trim rings,but forgot to take pics (duh). They are newer than the grill. I picked up the grill in the 90's because I liked the look better than the stock 82 grill and had to buy the 85 style Silverado 4 headlight trim rings. I would take $20 for them, and no additional shipping charge if you bought them and the grill. the grill has two of the bottom mounting tabs broken off, but no other cracks. I do not have the bowtie emblem any longer.

**WIDESIDE72** · 12-12-2008, 08:29 PM

Picture of grill

**WIDESIDE72** · 05-02-2009, 09:08 AM

The truck is still for sale. WIll part out, but you will have to come and pull the large parts (I will not pull and ship large items).

**old Rusty C10** · 05-02-2009, 10:17 AM

how are the front bumper guards? i dont always check this thread so please PM me if i dont get back to you...i need them shipped to 11215 in brooklyn NY

flamingbig10 · 05-02-2009, 12:30 PM

are the seat belt bolt covers any good

badaceissimo · 05-03-2009, 10:41 PM

Dang... I was looking to get two front doors with power and a Driver's side fender but I'm not sure that I want to drive to Leander, TX for them. If you decide to ship these three pieces before any parts on them go missing, I'm game for a quote.

Also, I'm getting married this summer in Houston (goin where my mother is) and I may be able to convince my future wife to let me meet you in Houston or the West side of Houston while we are there. Feel free to pm me. I sincerely doubt I can get out to Leander, Tx but I can meet you in Houston or pay shipping if it isn't an arm and a leg. I'd like to beat the local price here at the junkyard if I can. Thanks.

**N2TRUX** · 05-03-2009, 11:30 PM

If you are parting this truck, please post prices per forum rules.

dammitmitchell · 05-04-2009, 01:13 AM

rims ...? no tires..
i could use some rims to swap out so i can get my truck into a garage so i can work on it...
im up in abilene...

badaceissimo · 05-04-2009, 09:53 AM

I forgot to ask, does it have an anti-slip differential in the back? I don't remember what my bolt pattern is on my rims but I'd like to get an axle that doesn't slip when I start a load.

stealthy '69 · 05-14-2009, 02:30 PM

PMed about front sway bar, and back TTT for you

**WIDESIDE72** · 05-14-2009, 03:50 PM

Sorry, already pulled sway bar to use on my 72...

**WIDESIDE72** · 05-14-2009, 03:52 PM

Quote:

Originally Posted by N2TRUX

If you are parting this truck, please post prices per forum rules.

I will not pull and ship parts, so I will not be posting prices. If someone wants pieces, they will have to come out and pull them themselves.

I will also not be selling any parts that would make the truck unable to be moved, such as wheels/ tires, axles, front suspension, steering column

12-07-2008, 06:44 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans $500-Solid truck, the maroon paint is the original paint, no rust except for three or four very small pin holes behind rear wheel. The doors on this truck are very nice, only one (passenger side rear) scrape spot about 1/8" deep, 1/2 " wide and 6" long. Not even any door dings on the other three doors. The driver fender is very nice, the pass fender has two easily fixed dings, and the hood has two dents on the front passenger edge. The full floater rear axle shown in the pics has been sold. The radiator and hydroboost brake booster have been sold. The truck now has a 9 1/2" C clip rear axle under it so that it can be moved. It has a traditional vacuum power brake booster installed. The truck was originally 6.2 diesel/ 700 r4 truck. It now has no engine or trans. Maroon bench vinyl front seat needs cover, second seat good, no 3rd seat. Has rear AC, power windows and locks that all worked when parked. Very good tilt steering column with keys. Recently replaced u joints. Shocks pulled for another truck. One chip in windshield all other glass perfect. Clear Texas title in hand. The truck has a nice 86 model grille and headlight rings. I believe I still have the 82 grille and headlight rings in the barn. The stainless steel mirrors are in very very good condition. The truck is in Leander, Tx NW of Austin. Attached Images Last edited by old Rusty C10; 12-16-2009 at 09:48 PM.

12-07-2008, 08:33 PM	#2
trenchwarfare Registered User Join Date: Nov 2008 Location: WNY Posts: 313	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans dash pad in decent shape? __________________ ____________________________________

12-08-2008, 11:02 AM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Sorry, dash pad is shot (cracked)

12-10-2008, 12:06 PM	#4
Wardworks Registered User Join Date: Nov 2008 Location: Hanford, CA Posts: 3	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Can you send me a picture of the rear inner door panels. Thanks, Ron

12-10-2008, 04:47 PM	#5
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Can I get some pictures of the 86 grille.... What would shipping be to 92345 ? Thanks __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

12-10-2008, 10:19 PM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans I already had pics of the door panels, but nothing up close of the grille. I will take grille pics tomorrow. Attached Images

12-10-2008, 10:23 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans The factory tint on the rear windows did a good job of preserving the plastic on the rear door panels. They are not sun baked, but not perfect either. They are slightly faded, but I will include both pieces of lower carpet, door handle trims, ash trays, window switches, arm rests and door lock pulls. I am asking $50 + shipping due to size. Last edited by WIDESIDE72; 02-11-2011 at 01:38 AM.

12-10-2008, 10:34 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Pics of hood ornament $15 shipped to continental US $10 you pick up Attached Images

12-10-2008, 10:34 PM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans do you have the door inserts for the front doors and are they in good shape with all the mounting studs on the back...thanks... Chuck.

12-10-2008, 10:38 PM	#10
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans I'll take the hood ornament...I'll see if I can get my sister to pick it up if not I'll get you to ship it...thanks alot... Chuck. Last edited by Stitch; 12-10-2008 at 10:38 PM.

12-10-2008, 10:42 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans The passenger side front door panel has never been off, and I haven't had the driver front door panel off in about 15 yrs, when replacing the electric window motor, so everything should be good. I am not sure what you mean by the door inserts... It has been a while since I had the panels off a 73-87 truck. Front door panels are faded pretty badly, but I will include all pieces including two good door pull straps, 3 good plastic strap anchor covers (I have the fourth, but the little plastic clip that holds it on the door panel broke off), bottom carpet, power window and lock switches, door lock pulls, nice arm rests and map pockets. $50 shipped due to size Attached Images Last edited by WIDESIDE72; 12-10-2008 at 10:47 PM.

12-10-2008, 10:45 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans $20 + shipping for velour inserts(only)on front doors. These are still in VERY nice condition. No stains or tears. Last edited by WIDESIDE72; 12-10-2008 at 10:46 PM.

12-10-2008, 10:55 PM	#13
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans never mind...the pieces I was talking about are where the door pull straps are and I'm looking for a set without the straps...thanks though...I still will take the hood ornament though... Chuck.

12-12-2008, 08:29 PM	#15
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Picture of grill Attached Images

05-02-2009, 09:08 AM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans The truck is still for sale. WIll part out, but you will have to come and pull the large parts (I will not pull and ship large items).



Register or Log In To remove these advertisements.

05-02-2009, 10:17 AM	#17
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,261	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans how are the front bumper guards? i dont always check this thread so please PM me if i dont get back to you...i need them shipped to 11215 in brooklyn NY __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-02-2009, 12:30 PM	#18
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans are the seat belt bolt covers any good __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

05-03-2009, 10:41 PM	#19
badaceissimo Registered User Join Date: Apr 2009 Location: Ruston, LA Posts: 78	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Dang... I was looking to get two front doors with power and a Driver's side fender but I'm not sure that I want to drive to Leander, TX for them. If you decide to ship these three pieces before any parts on them go missing, I'm game for a quote. Also, I'm getting married this summer in Houston (goin where my mother is) and I may be able to convince my future wife to let me meet you in Houston or the West side of Houston while we are there. Feel free to pm me. I sincerely doubt I can get out to Leander, Tx but I can meet you in Houston or pay shipping if it isn't an arm and a leg. I'd like to beat the local price here at the junkyard if I can. Thanks.

05-03-2009, 11:30 PM	#20
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans If you are parting this truck, please post prices per forum rules. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-04-2009, 01:13 AM	#21
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans rims ...? no tires.. i could use some rims to swap out so i can get my truck into a garage so i can work on it... im up in abilene... __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042 Last edited by dammitmitchell; 05-04-2009 at 01:13 AM.

05-04-2009, 09:53 AM	#22
badaceissimo Registered User Join Date: Apr 2009 Location: Ruston, LA Posts: 78	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans I forgot to ask, does it have an anti-slip differential in the back? I don't remember what my bolt pattern is on my rims but I'd like to get an axle that doesn't slip when I start a load.

05-14-2009, 02:30 PM	#23
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans PMed about front sway bar, and back TTT for you

05-14-2009, 03:50 PM	#24
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Sorry, already pulled sway bar to use on my 72...

Register or Log In To remove these advertisements.