CA Parting out 84 Chevy 3/4 ton 4x4* - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyrestoguy · 01-29-2010, 10:13 AM

Quote:

--------------------------------------------------------------------------------

Quote:
Originally Posted by chevyrestoguy
Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference....

Also, did you ever sell the Q-Jet?

Alex

Yes, Mine is for a 4 row radiator. I did not sell the carb yet because I'm still using it to test engines. Let me know what radiator you have and the measurement of your metal piece. Thanks, Ray

Ray-
I'll check the radiator size tomorrow and I'll let you know if I need it or not. I'm pretty certain that it's a 4-core, but I'm out of town right now and can't physically check it until tomorrow.

It sounds like you're using the carb right now, but are you going to be at a point of selling it anytime in the future?

Thanks,
Alex

KrazyRay · 01-29-2010, 11:35 PM

Quote:

Originally Posted by chevyrestoguy

Ray-
I'll check the radiator size tomorrow and I'll let you know if I need it or not. I'm pretty certain that it's a 4-core, but I'm out of town right now and can't physically check it until tomorrow.

It sounds like you're using the carb right now, but are you going to be at a point of selling it anytime in the future?

Thanks,
Alex

Alex, I don't know for sure. My buddy thinks I should hold on to it because its hard to find a reliable carb for testing all of the engines that come through here.
Thanks, Ray

bikes&bowties · 01-31-2010, 01:18 AM

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

Kenbo-Slice · 01-31-2010, 06:52 PM

Does it have good fuel tank support assemblies? (the ones that bolt onto the side of the frame) If so, please PM me a price including shipping to 12569. Thank you!

KrazyRay · 01-31-2010, 07:25 PM

Quote:

Originally Posted by Kenbo-Slice

Does it have good fuel tank support assemblies? (the ones that bolt onto the side of the frame) If so, please PM me a price including shipping to 12569. Thank you!

pm sent, pic of many brackets

bikes&bowties · 01-31-2010, 10:05 PM

Quote:

Originally Posted by bikes&bowties

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

Will the NP203 cover work? If so I'll take it. PM me

DBLSPRT68 · 02-02-2010, 10:56 PM

Quote:

Originally Posted by KrazyRay

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

KrazyRay · 02-03-2010, 01:31 AM

Quote:

Originally Posted by DBLSPRT68

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

DBLSPRT68 · 02-05-2010, 10:05 PM

Ray, just sent you Paypal cash for the Q-jet. David

mfolds442 · 02-07-2010, 07:04 PM

how much for the clock shipped to 07722?

KrazyRay · 02-08-2010, 02:03 AM

Quote:

Originally Posted by mfolds442

how much for the clock shipped to 07722?

I can do $18 shipped. Thanks, Ray

Jim_PA · 02-09-2010, 01:19 AM

Did the carb go with the motor? That's a pretty nice one!

KrazyRay · 02-09-2010, 10:43 PM

Quote:

Originally Posted by Jim_PA

Did the carb go with the motor? That's a pretty nice one!

I sold the carb to a board member. I think I let it go too cheap.

CHROMAHOLIC · 02-09-2010, 11:29 PM

Ray...still looking for window defrost vents for a 77 if you get to checking your other cabs or anybody else that might have a set in good shape...thanks, Jim

Jim_PA · 02-10-2010, 12:34 AM

Quote:

Originally Posted by KrazyRay

I sold the carb to a board member. I think I let it go too cheap.

It happens

New, those things sold for close to $500 (if memory serves me correct)

KrazyRay · 02-10-2010, 12:36 AM

Quote:

Originally Posted by CHROMAHOLIC

Ray...still looking for window defrost vents for a 77 if you get to checking your other cabs or anybody else that might have a set in good shape...thanks, Jim

I found a set in a 78 Chevy with AC. I can do $25 plus shipping for the 2 defrost vents and the connector duct. If interested, let me know your address for a shipping quote. Thanks, Ray

*Stitch* · 02-10-2010, 12:52 AM

Ray, Chromaholic also probably wants good cab corner speaker grills if he hasn't already picked some up somewhere...

KrazyRay · 02-10-2010, 01:00 AM

Quote:

Originally Posted by Fat Hoe

Ray, Chromaholic also probably wants good cab corner speaker grills if he hasn't already picked some up somewhere...

Thanks Chuck, but I sold the set I had a while back.

CHROMAHOLIC · 02-10-2010, 07:48 AM

Quote:

Originally Posted by KrazyRay

I found a set in a 78 Chevy with AC. I can do $25 plus shipping for the 2 defrost vents and the connector duct. If interested, let me know your address for a shipping quote. Thanks, Ray

Thanks Ray, shipping would be to 14086 can you email me a pic of them to
lowagon@rogers.com then I can respond with the full shipping address....and payment details.

Jim

KrazyRay · 02-10-2010, 05:37 PM

Quote:

Originally Posted by CHROMAHOLIC

Thanks Ray, shipping would be to 14086 can you email me a pic of them to
lowagon@rogers.com then I can respond with the full shipping address....and payment details.

Jim

Jim, I'm sorry. The mounting tabs broke when I pulled them out. $10 plus shipping if you still want them. The 2 vents and the duct all all one piece. Thanks, Ray

CHROMAHOLIC · 02-10-2010, 06:06 PM

Ray can you send me pic if possible.....or post a pic on here so I can see what it looks like

DBLSPRT68 · 02-12-2010, 02:08 AM

Quote:

Originally Posted by KrazyRay

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

Ray, got the carb today. Great job on the packing!!!! Looks great!!! Thanks for the deal!!!! PS. I know about these carbs. I bought 2 of them new. Over $500.00 each

. Had problems with the first one on my 68 Camaro and sent it back, got a rebuilt one in return(not too happy about that). Second one is still on my truck right now, and runs great. This one will be a good spare, and will sit on my spare 350. You never know when your going to find a cool car that just needs a Chevy heart

transplant. Edlebrock only made these for a few years and stopped.

Sarge261 · 02-12-2010, 09:59 AM

Ray I recieved my tank brackets and straps yesterday. Great job, these things are mint. I would never find them up here in that condition. Thanks again and I always look foreward to see your for sale adds. Your a class act with your parts and I will buy from you as often as I can.

Sarge

TwoFiftyShifter · 02-12-2010, 10:13 AM

Hey Sarge Where are you in NY?

Sarge261 · 02-12-2010, 10:15 AM

Albany/Schenectady area

01-31-2010, 01:18 AM	#103
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting out 84 Chevy 3/4 ton 4x4* Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

01-31-2010, 06:52 PM	#104
Kenbo-Slice Registered User Join Date: Jan 2010 Location: Poughkeepsie, N.Y. Posts: 108	Re: Parting out 84 Chevy 3/4 ton 4x4* Does it have good fuel tank support assemblies? (the ones that bolt onto the side of the frame) If so, please PM me a price including shipping to 12569. Thank you! __________________ It's a Jeep towing machine! (at least it will be)

02-05-2010, 10:05 PM	#109
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Parting out 84 Chevy 3/4 ton 4x4* Ray, just sent you Paypal cash for the Q-jet. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

02-07-2010, 07:04 PM	#110
mfolds442 Registered User Join Date: Jan 2010 Location: Colts Neck, NJ Posts: 7	Re: Parting out 84 Chevy 3/4 ton 4x4* how much for the clock shipped to 07722?

02-09-2010, 01:19 AM	#112
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting out 84 Chevy 3/4 ton 4x4* Did the carb go with the motor? That's a pretty nice one! Last edited by Jim_PA; 02-09-2010 at 01:20 AM.

02-09-2010, 11:29 PM	#114
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: Parting out 84 Chevy 3/4 ton 4x4* Ray...still looking for window defrost vents for a 77 if you get to checking your other cabs or anybody else that might have a set in good shape...thanks, Jim

02-10-2010, 12:52 AM	#117
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting out 84 Chevy 3/4 ton 4x4* Ray, Chromaholic also probably wants good cab corner speaker grills if he hasn't already picked some up somewhere...

02-10-2010, 06:06 PM	#121
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: Parting out 84 Chevy 3/4 ton 4x4* Ray can you send me pic if possible.....or post a pic on here so I can see what it looks like

02-12-2010, 09:59 AM	#123
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4* Ray I recieved my tank brackets and straps yesterday. Great job, these things are mint. I would never find them up here in that condition. Thanks again and I always look foreward to see your for sale adds. Your a class act with your parts and I will buy from you as often as I can. Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

02-12-2010, 10:13 AM	#124
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: Parting out 84 Chevy 3/4 ton 4x4* Hey Sarge Where are you in NY? __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

02-12-2010, 10:15 AM	#125
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4* Albany/Schenectady area __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.