OR Parting 1986 Suburban K20 4x4 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 02-06-2015, 01:40 PM

Quote:

Originally Posted by beamn7

Thanks Thomas! Should be metal just like the one in the 'burb and twist into the flange mount valve covers.

I have one off another engine, clean and ready for paint. I may have an oil cap for it if needed.

How does $22.50 shipped sound? Let me know,

Thank you for the interest,
Thomas

B_derK20 · 02-07-2015, 11:37 PM

Was the W shaped cross member and t-case shield spoken for? If not I'd like to be in line.

DLTruck1973 · 02-08-2015, 12:05 AM

Quote:

Originally Posted by B_derK20

Was the W shaped cross member and t-case shield spoken for? If not I'd like to be in line.

"W" cross member is still available but the skid shield sold. I may have another skid shield but will have to confirm on Monday. If you can give me your zip code, I can quote you for shipping also.

Thank you,
Thomas

B_derK20 · 02-08-2015, 12:35 AM

My ZIP is 81504. If you could check on the skid plate that would be great. That's the most important part to me.

b&a72 · 02-09-2015, 05:14 PM

Do you still have the cab wiring harness?

DLTruck1973 · 02-09-2015, 05:35 PM

Quote:

Originally Posted by B_derK20

My ZIP is 81504. If you could check on the skid plate that would be great. That's the most important part to me.

I am fresh out of skid shields at this time. We sold the last one I had last week.

Let me know if you are interested in the crossmember.

Thank you,
Thomas

DLTruck1973 · 02-09-2015, 05:36 PM

Quote:

Originally Posted by b&a72

Do you still have the cab wiring harness?

Not from this Suburban but I have the under dash harness for an 86 pick up for $75.00 plus shipping.

Let me know if it will work for you,

Thank you,
Thomas

b&a72 · 02-09-2015, 05:37 PM

Quote:

Originally Posted by DLTruck1973

Not from this Suburban but I have the under dash harness for an 86 pick up for $75.00 plus shipping.

Let me know if it will work for you,

Thank you,
Thomas

I am assuming it had ac, and this would include the entire cab under dash harness. Is there any splices, or is it butchered in any way?

DLTruck1973 · 02-09-2015, 06:59 PM

Quote:

Originally Posted by b&a72

I am assuming it had ac, and this would include the entire cab under dash harness. Is there any splices, or is it butchered in any way?

The AC harness is separate and has vacuum hoses that go through the firewall. It is an additional $30.00 on top of the main under dash harness. I need to know exactly what you need. The power door / power lock has a separate harness, the cruise control has a separate harness.

You have the main under dash harness for $75.00 plus what ever add on you need. We have all of those harnesses and they will be in good condition with nothing hacked.

Let me know what you need and I can get you exact pricing.

junkrat · 02-09-2015, 07:19 PM

Got my crossmember to day it's in great shape an was packaged like it was a priceless work of art , thanks again great seller!!

DLTruck1973 · 02-09-2015, 08:53 PM

Quote:

Originally Posted by junkrat

Got my crossmember to day it's in great shape an was packaged like it was a priceless work of art , thanks again great seller!!

Thank you for the kind words.

We appreciate the business.

Thomas

beamn7 · 02-10-2015, 11:02 PM

Quote:

Originally Posted by DLTruck1973

I have one off another engine, clean and ready for paint. I may have an oil cap for it if needed.

How does $22.50 shipped sound? Let me know,

Thank you for the interest,
Thomas

Deal!
PM sent.

beamn7 · 02-17-2015, 06:16 PM

Quote:

Originally Posted by beamn7

Deal!
PM sent.

Got the parts. Thanks again Thomas!

Littletony · 02-19-2015, 09:14 AM

What is the ratio of the axles and would you ship to 28555? Also what shape is the tilt column in?

DLTruck1973 · 02-19-2015, 01:34 PM

Quote:

Originally Posted by Littletony

What is the ratio of the axles and would you ship to 28555? Also what shape is the tilt column in?

The ratios on this one are 3:73 but I do have other ratios. Are you looking for completes, drum to drum, hub to hub on the front? They are not cheap to ship. Last time I checked freight to the east side of the country, it was $350.00 for a complete rear.

Steering column is available if you do not need it with pulse wipers for $225.00 plus shipping.

Let me know and thank you for the interest,
Thomas

Littletony · 02-19-2015, 03:29 PM

Yes sir I would need them as complete as possible. I'm replacing the ones under my 1/2 truck. What are you asking for a set with 373 or 410 gear ratio?

DLTruck1973 · 02-20-2015, 04:20 PM

Quote:

Originally Posted by Littletony

Yes sir I would need them as complete as possible. I'm replacing the ones under my 1/2 truck. What are you asking for a set with 373 or 410 gear ratio?

Complete hub to hub front removed from an 1987 K20 would run $450.00

On the rear, are you looking for a full floater or semi floater? $350.00 on the full floater and $300.00 on the semi floater.

These have 3:73 gear sets. Let me know. Like I mentioned, I shipped on to NY and shipping was just over $350.00 and I would be willing to bet it would be about double that for both.

Thank you again for the interest,
Thomas.

Littletony · 02-20-2015, 04:39 PM

As much as i would love to have these, I'm going to pass. With shipping these are going to be in the 1 ton range for my area. I am very sorry to have wasted any of your time Sir.

DLTruck1973 · 02-20-2015, 05:04 PM

Quote:

Originally Posted by Littletony

As much as i would love to have these, I'm going to pass. With shipping these are going to be in the 1 ton range for my area. I am very sorry to have wasted any of your time Sir.

No time wasted here. More than happy to answer questions.

Yes, shipping is very pricey and I understand completely.

Thanks again,
Thomas

gmcdeadhead · 05-25-2015, 06:32 AM

would you happen to have the dust shield cover off the 700r4 trans ? thanks

junkrat · 05-25-2015, 09:18 PM

Do you have the sway bar brackets that attach to the frame? With bolts?

gmcdeadhead · 05-26-2015, 03:36 AM

also would you have a 17" clutch fan?

DLTruck1973 · 05-26-2015, 11:31 AM

Quote:

Originally Posted by gmcdeadhead

would you happen to have the dust shield cover off the 700r4 trans ? thanks

Do you need the sheet metal 2wd version or the cast aluminum 4x4 version?

Let me know and I will see what I can help you with.

Thank you,
Thomas

DLTruck1973 · 05-26-2015, 11:46 AM

Quote:

Originally Posted by junkrat

Do you have the sway bar brackets that attach to the frame? With bolts?

Are you talking about the brackets that bolt to the front cross member that have the bushing inside,

I do have them. $10.00 for the pair with the bolts plus $7.00 to ship.

Let me know,

Thank you,
Thomas

gmcdeadhead · 05-26-2015, 11:59 AM

I need the sheet metal 2wd one

02-07-2015, 11:37 PM	#102
B_derK20 Registered User Join Date: Apr 2011 Location: Clifton, CO Posts: 75	Re: Parting 1986 Suburban K20 4x4 Was the W shaped cross member and t-case shield spoken for? If not I'd like to be in line.

02-08-2015, 12:35 AM	#104
B_derK20 Registered User Join Date: Apr 2011 Location: Clifton, CO Posts: 75	Re: Parting 1986 Suburban K20 4x4 My ZIP is 81504. If you could check on the skid plate that would be great. That's the most important part to me.

02-09-2015, 05:14 PM	#105
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Parting 1986 Suburban K20 4x4 Do you still have the cab wiring harness?

02-09-2015, 07:19 PM	#110
junkrat Registered User Join Date: Jul 2014 Location: katy TX Posts: 8	Re: Parting 1986 Suburban K20 4x4 Got my crossmember to day it's in great shape an was packaged like it was a priceless work of art , thanks again great seller!!

02-19-2015, 09:14 AM	#114
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting 1986 Suburban K20 4x4 What is the ratio of the axles and would you ship to 28555? Also what shape is the tilt column in? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

02-19-2015, 03:29 PM	#116
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting 1986 Suburban K20 4x4 Yes sir I would need them as complete as possible. I'm replacing the ones under my 1/2 truck. What are you asking for a set with 373 or 410 gear ratio? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

02-20-2015, 04:39 PM	#118
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting 1986 Suburban K20 4x4 As much as i would love to have these, I'm going to pass. With shipping these are going to be in the 1 ton range for my area. I am very sorry to have wasted any of your time Sir. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

05-25-2015, 06:32 AM	#120
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting 1986 Suburban K20 4x4 would you happen to have the dust shield cover off the 700r4 trans ? thanks

05-25-2015, 09:18 PM	#121
junkrat Registered User Join Date: Jul 2014 Location: katy TX Posts: 8	Re: Parting 1986 Suburban K20 4x4 Do you have the sway bar brackets that attach to the frame? With bolts?

05-26-2015, 03:36 AM	#122
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting 1986 Suburban K20 4x4 also would you have a 17" clutch fan?

05-26-2015, 11:59 AM	#125
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting 1986 Suburban K20 4x4 I need the sheet metal 2wd one



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.