OR 100's of 73/80 pick up and blazer parts F/S

[flashed]

I will take the red stepside marker lense (red) as well as the door striker posts (1 pr) from earlier post if I can mail a money order for payment as I dont have PayPal. If so just PM an address and name with total $$ needed .
Thanks
John

[trucks72]

I will take the seat brackets. It will be tomorrow before I get back on the computer.

[DLTruck1973]

Originally Posted by flashed

I will take the red stepside marker lense (red) as well as the door striker posts (1 pr) from earlier post if I can mail a money order for payment as I dont have PayPal. If so just PM an address and name with total $$ needed .
Thanks
John

Hi John,

Money order is fine. I will PM you the details.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by trucks72

I will take the seat brackets. It will be tomorrow before I get back on the computer.

I will PM you the details with a shipping quote. Can you give me your zip code please?

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 77K10Silverado

I def take the bezel. Are the side panels metal or plastic? If metal, ill take a passenger side one.

Shipping to 27409

Thx, Mike

Hi Mike,

For the dash bezel and pass side door panel insert is $75.00 and $31.41 to ship. $106.41 is the total.

Let me know how you want to pay and I will PM you the details.

Thank you very much,
Thomas

[77K10Silverado]

Thomas, is the side insert metal or plastic? And I'll be using PayPal.

Thx

[DLTruck1973]

Originally Posted by 77K10Silverado

Thomas, is the side insert metal or plastic? And I'll be using PayPal.

Thx

Hi Mike,

It is a metal insert.

Thank you,
Thomas

[77K10Silverado]

Sweet. I need just a passenger side and the bezel to 27409. PayPal will be the method.

[brakenit]

Originally Posted by DLTruck1973

Here are some better photos. The shipping to your zip code will be $40.00 so $90.00 total. Let me know and thank you for the interest,
Thomas

That looks good to me. I'll take it. Let me know where to send payment to, I prefer Paypal.

[Am3rican]

Originally Posted by DLTruck1973

Here you go with some prices and photos of everything on your list. None of these parts are perfect and have some blemishes here and there. They are priced according to condition.

Fan shroud is very nice at $35.00
Rear carpet retainer...$30.00 it does have several small dings that I noticed after washing.
Dash insert...$25.00
Saddle visors...$30.00 pr
Seat backs. There are better photos of these on post #32. They do have very minor cracks but still nice $40.00 each


That is a total $200.00 plus shipping. Let me know if interested and we can get you a shipping qoutee

Ok, here we go...
Fan shroud and visors won't work for me.

I will definitely take the rear carpet strip and the dash insert.

If the seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

Thanks for posting the parts and all your patience.

[f.monroe]

I don't see anyone in line for the pair of bucket seats so I would like to get in line for them pending a shipping quote to a business address in Bryan , Tx 77808.
Also could you send me a couple more pics of the drivers seat and condition of the frames.
Thanks
Frank

[75gmc454]

Check on a shipping quote for the truck tailgate band you want 65 for and the two blazer tailgate bands you want 65 each for. My zip is 38930. It is a commercial address.

Thanks!! Clint

[Am3rican]

I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.

[DLTruck1973]

Originally Posted by 77K10Silverado

Sweet. I need just a passenger side and the bezel to 27409. PayPal will be the method.

Sounds good.

I have you covered. Did you get the PM with the payment information?

Let me know. I will get everything ready to ship as soon as payment is verified.

I appreciate the business,
Thomas

[DLTruck1973]

Originally Posted by brakenit

That looks good to me. I'll take it. Let me know where to send payment to, I prefer Paypal.

Sending you a PM with payment information.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by f.monroe

I don't see anyone in line for the pair of bucket seats so I would like to get in line for them pending a shipping quote to a business address in Bryan , Tx 77808.
Also could you send me a couple more pics of the drivers seat and condition of the frames.
Thanks
Frank

Absolutely. I will get some better photos and a shipping quote out to you tomorrow.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by 75gmc454

Check on a shipping quote for the truck tailgate band you want 65 for and the two blazer tailgate bands you want 65 each for. My zip is 38930. It is a commercial address.

Thanks!! Clint

Hi Clint,

I will work on your request and get you a shipping quote as soon as possible. If not Friday, then it will be Monday for sure.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by Am3rican

I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.

I can verify the 73 only tomorrow or Monday for you. Also I believe that the grill mounts do bolt to the core support. I do have a complete set of grill mounts for a 74 GMC grill that I think are the same as a Chevy.

I will let you know what I find out as soon as possible.

Thank you,
Thomas

[77K10Silverado]

Thomas I didn't get a pm with payment info. If you can shoot that over I'll send you a payment thi morning.

Thank you sir and here's a little feel good for today!
https://youtu.be/oNxMXDIzSCI

[trucks72]

38555

[Am3rican]

Originally Posted by Am3rican

Ok, here we go...
Fan shroud and visors won't work for me.

I will definitely take the rear carpet strip and the dash insert.

If the saddle seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

Thanks for posting the parts and all your patience.

Quote:
Originally Posted by Am3rican View Post
I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.


I can verify the 73 only tomorrow or Monday for you. Also I believe that the grill mounts do bolt to the core support. I do have a complete set of grill mounts for a 74 GMC grill that I think are the same as a Chevy.

I will let you know what I find out as soon as possible.

Thank you,
Thomas


I will definitely take the rear carpet strip and the non AC dash insert.

If the saddle seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

I would like the 73 K5 emblem that has the posts intact

Let me know on the 73 overflow bottle/mount and 73/74 chevy grille mounts, I've heard GMC is different?

Thanks

[DLTruck1973]

Originally Posted by Am3rican

Quote:
Originally Posted by Am3rican View Post
I'm looking for a 73 radiator overflow bottle and mount, I think these are 73 only?

I also would be interested in 73 grille mounts, the ones that are (I think) welded to the core support. If you have a rusty 73 core support and can remove (sawzall) the mounts with part of the core support I can remove the spot welds. I haven't seen the 73 grille mounts so I may be way off base.


I can verify the 73 only tomorrow or Monday for you. Also I believe that the grill mounts do bolt to the core support. I do have a complete set of grill mounts for a 74 GMC grill that I think are the same as a Chevy.

I will let you know what I find out as soon as possible.

Thank you,
Thomas


I will definitely take the rear carpet strip and the non AC dash insert.

If the saddle seat backs are a matching set (same color, wear etc) I'll take those.

Can I get closer pictures of the nice gray door panels? I think I want those in my pile too.

I would like the 73 K5 emblem that has the posts intact

Let me know on the 73 overflow bottle/mount and 73/74 chevy grille mounts, I've heard GMC is different?

Thanks

I will get you the answers and photos you need soon.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 77K10Silverado

Thomas I didn't get a pm with payment info. If you can shoot that over I'll send you a payment thi morning.

Thank you sir and here's a little feel good for today!
https://youtu.be/oNxMXDIzSCI

Hi Mike,

PM on the way.

Thank you and have a good weekend,
Thomas

[77K10Silverado]

Payment sent!

[DLTruck1973]

Originally Posted by 77K10Silverado

Payment sent!

Got your payment Mike and well get your parts out today.

Thank you again,
Thomas