What did you do to your truck today! - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**El Jay** · 06-03-2010, 01:52 AM

Tracked down an electrical problem in the tail light circuit & fixed it. No more blown fuses, at least for a while.

CG · 06-03-2010, 12:47 PM

Moved my truck back down the driveway a few feet so my honeys dad could get around it when he mows our yard...then I went back in and watched TV =)

Rat Bastid · 06-03-2010, 03:49 PM

today i went and picked up new outside door hamdles and driverside hinge pins

Critter · 06-03-2010, 05:01 PM

Quote:

Originally Posted by CG

Moved my truck back down the driveway a few feet so my honeys dad could get around it when he mows our yard...then I went back in and watched TV =)

THAT'S WHAT I'M TALKIN BOUT!

vectorit · 06-03-2010, 06:15 PM

Just finished hand waxing the burb.
Still need to go and do the roof though.

67Slider · 06-03-2010, 06:36 PM

My Daughter, Hanna and I removed the radiator, battery tray, grill support and a bunch of hoses.
[IMG]

[/IMG]

big mike71 · 06-03-2010, 06:44 PM

I put on new header gaskets and went for a criuse.

spavinaw · 06-03-2010, 08:58 PM

I bought new door mirrors and weather stripping. Put the mirrors on. Didnt realize I needed adhesive to make the weather stripping stay in place.

Hubscrub · 06-03-2010, 09:00 PM

painted wife's rad. support yesterday, painted hood hinges today and fixed heater box come off the hook i had it on a made a quarter size hole in it after i had it together and painted

**americanmusc1e** · 06-03-2010, 11:00 PM

checked timing and pulled some vacuum advance timing and....

CRIED.... because there was water all over my carpet

I have a leak under my cowl.........I have to take the whole frontend off and more to fix it........I had it apart last year when I had the fenders off and I neglected to fix it

ERASER5 · 06-03-2010, 11:10 PM

I finally installed my hitch. It tucks a little deep under the bumper, but it is solid. Wired and ready to go. Now if only the engine ran...

oldblue1968chevy · 06-03-2010, 11:31 PM

american muscle where exactly is that spot at?

68GMCCustom · 06-03-2010, 11:32 PM

...finished getting my motor ready to pull, pulled front coil springs and most of steering.

**americanmusc1e** · 06-04-2010, 12:07 AM

Quote:

Originally Posted by oldblue1968chevy

american muscle where exactly is that spot at?

if you take off the cowl panel and look down in the cowling air vent area directly over where the heater core is you'll find it (I hope that makes sense)

I also have these spots on both sides in the channel under the hood-to-cowl seal, and directly beside the other one

Lippyp · 06-04-2010, 12:31 PM

Started her up, listened to the misfire, realised I have more work to do than I thought to get her back on the road and then put the cover back on!

Scott Webster · 06-04-2010, 07:12 PM

Got the axle in. Shocks and adjustable panhard bar too. Still need to to the brake lines, driveshaft.

68GMCCustom · 06-04-2010, 07:33 PM

...pulled the motor and trans...along with the front steering and front coils.

vectorit · 06-04-2010, 07:37 PM

Waxed the roof the the burb.

**Palf70Step** · 06-04-2010, 08:13 PM

Quote:

Originally Posted by vectorit

Waxed the roof the the burb.

Those are about the size of Rhode Island!

Well at least it feels that way when you are doing one.

bjinx · 06-05-2010, 12:31 AM

Changed the oil, fuel fliter and PCV valve. Finally made a spacer to raise the tranmission up and get the drivers side header pipe off of the transmission crossmember. A few more things to check tomorrow, preparing for about a 250 mile trip Sunday to Billet Proof Show in Giddings, Tx.

T/C · 06-05-2010, 12:50 AM

Painted my steering column my interior is now done other then finishing the wiring in the dash!

So much closer to my new motor and tranny !

vectorit · 06-05-2010, 09:04 AM

Quote:

Originally Posted by Palf70Step

Those are about the size of Rhode Island!
Well at least it feels that way when you are doing one.

Thanks for understanding!

I was thinking people would be saying to themselves: What, wax a roof? what so tough about that!

yea, doing a burb with rubbing compound is like doing 3 or 4 pick ups! Plus, with my burb I need to use a ladder to do everything from the hood up. I know

but after wards - so nice!

CG · 06-05-2010, 09:05 AM

Quote:

Originally Posted by vectorit

Thanks for understanding!

I was thinking people would be saying to themselves: What, wax a roof? what so tough about that!

yea, doing a burb with rubbing compound is like doing 3 or 4 pick ups! Plus, with my burb I need to use a ladder to do everything from the hood up. I know

but after wards - so nice!

Well come on man, post up some pics of all your hard work!

Hubscrub · 06-05-2010, 11:29 AM

installed 1 new fender 1 oringinal, new rad. support on my wife's 67, and put new seals in the heater box

swierker · 06-05-2010, 04:41 PM

Installed a new windshield washer pump. Moved it from inside the cab to the firewall. NOW it will pass inspection...

06-03-2010, 01:52 AM	#251
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: What did you do to your truck today! Tracked down an electrical problem in the tail light circuit & fixed it. No more blown fuses, at least for a while. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

06-03-2010, 12:47 PM	#252
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: What did you do to your truck today! Moved my truck back down the driveway a few feet so my honeys dad could get around it when he mows our yard...then I went back in and watched TV =)

06-03-2010, 03:49 PM	#253
Rat Bastid Registered User Join Date: Dec 2007 Location: sumner wa. Posts: 158	Re: What did you do to your truck today! today i went and picked up new outside door hamdles and driverside hinge pins

06-03-2010, 06:15 PM	#255
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: What did you do to your truck today! Just finished hand waxing the burb. Still need to go and do the roof though. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

06-03-2010, 06:36 PM	#256
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! My Daughter, Hanna and I removed the radiator, battery tray, grill support and a bunch of hoses. [IMG][/IMG] __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

06-03-2010, 06:44 PM	#257
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: What did you do to your truck today! I put on new header gaskets and went for a criuse. __________________ I'm not as good as I once was, But I'm as good once as I ever was.

06-03-2010, 08:58 PM	#258
spavinaw Registered User Join Date: Dec 2009 Location: Gravette, Ar Posts: 40	Re: What did you do to your truck today! I bought new door mirrors and weather stripping. Put the mirrors on. Didnt realize I needed adhesive to make the weather stripping stay in place. __________________ I hate rude behavior in a man.....I won't tolerate it - Cpt Woodrow F Call (Lonesome Dove) 1968 GMC C-10 (soon to be my oldest daughters) 2001 - 1500 4x4 ext cab - 150,000 miles 2001 - 1500 Burb - 233,000 Miles (wifes ride)

06-03-2010, 09:00 PM	#259
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: What did you do to your truck today! painted wife's rad. support yesterday, painted hood hinges today and fixed heater box come off the hook i had it on a made a quarter size hole in it after i had it together and painted __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

06-03-2010, 11:00 PM	#260
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: What did you do to your truck today! checked timing and pulled some vacuum advance timing and.... CRIED.... because there was water all over my carpet I have a leak under my cowl.........I have to take the whole frontend off and more to fix it........I had it apart last year when I had the fenders off and I neglected to fix it __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

06-03-2010, 11:10 PM	#261
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: What did you do to your truck today! I finally installed my hitch. It tucks a little deep under the bumper, but it is solid. Wired and ready to go. Now if only the engine ran... __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

06-03-2010, 11:31 PM	#262
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: What did you do to your truck today! american muscle where exactly is that spot at? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

06-03-2010, 11:32 PM	#263
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: What did you do to your truck today! ...finished getting my motor ready to pull, pulled front coil springs and most of steering. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

06-04-2010, 12:31 PM	#265
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: What did you do to your truck today! Started her up, listened to the misfire, realised I have more work to do than I thought to get her back on the road and then put the cover back on! __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

06-04-2010, 07:12 PM	#266
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: What did you do to your truck today! Got the axle in. Shocks and adjustable panhard bar too. Still need to to the brake lines, driveshaft. __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

06-04-2010, 07:33 PM	#267
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: What did you do to your truck today! ...pulled the motor and trans...along with the front steering and front coils. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 06-04-2010 at 07:36 PM.



Register or Log In To remove these advertisements.

06-04-2010, 07:37 PM	#268
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: What did you do to your truck today! Waxed the roof the the burb. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

06-05-2010, 12:31 AM	#270
bjinx Registered User Join Date: May 2010 Location: Houston, Texas Posts: 6	Re: What did you do to your truck today! Changed the oil, fuel fliter and PCV valve. Finally made a spacer to raise the tranmission up and get the drivers side header pipe off of the transmission crossmember. A few more things to check tomorrow, preparing for about a 250 mile trip Sunday to Billet Proof Show in Giddings, Tx.

06-05-2010, 12:50 AM	#271
T/C Registered User Join Date: Aug 2009 Location: Krum Tx. Posts: 267	Re: What did you do to your truck today! Painted my steering column my interior is now done other then finishing the wiring in the dash! So much closer to my new motor and tranny !

06-05-2010, 11:29 AM	#274
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: What did you do to your truck today! installed 1 new fender 1 oringinal, new rad. support on my wife's 67, and put new seals in the heater box Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

06-05-2010, 04:41 PM	#275
swierker Registered User Join Date: May 2010 Location: Wallingford, PA Posts: 186	Re: What did you do to your truck today! Installed a new windshield washer pump. Moved it from inside the cab to the firewall. NOW it will pass inspection...

Register or Log In To remove these advertisements.