What did you do to your truck today! - Page 111 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tmwoodall · 09-05-2011, 12:03 AM

Quote:

Originally Posted by rob32472

Love the wheels. Can you give more info on them?

20 x 8.5, come in polished, black, or as shown gray and polished lip. IIRC backspacing on the 8.5s is 5.25. Direct bolt on, not hub clearance or dust cap clearance issues. I bought them off eBay from Ron's wheels and they were shipped straight from showwheels. There are a few small imperfections in them , but you have to be examining them to find them. I didn't pay Coy prices and didn't expect a flawless wheel.

I'd buy them again in a heartbeat. I'll be putting 10" wide ones with 295 tires on the back.

showwheelsusa.com

I found them when another member posted (red 67 c10 out in California, with a really nice build, I forget his handle), posted a thread with them.

Bennett68C10 · 09-05-2011, 12:01 PM

Yesterday I started taking my doors apart to replace the inner bottoms and outer door skins. Sorry forgot to take pictures.

LadyBird · 09-05-2011, 03:05 PM

Got mine into it's permanent primer paint job

Came out pretty good for "paint it in the driveway" paint job. Wheels, tires, and a lot more soon to come!

ImageShack.us

RossRinSD · 09-06-2011, 08:45 PM

Ordered a MileMarker winch today... And, I should get a visit from the UPS fairy with some stuff from LMC tomorrow.

Its still 104 outside. I was hoping to get a little bit more done today, but doesn't look like thats going to happen.

willys72fleetside · 09-06-2011, 08:49 PM

FINALLY, I got the paint work done all but the hood.

67C10BUB · 09-06-2011, 08:51 PM

Quote:

Originally Posted by Tmwoodall

20 x 8.5, come in polished, black, or as shown gray and polished lip. IIRC backspacing on the 8.5s is 5.25. Direct bolt on, not hub clearance or dust cap clearance issues. I bought them off eBay from Ron's wheels and they were shipped straight from showwheels. There are a few small imperfections in them , but you have to be examining them to find them. I didn't pay Coy prices and didn't expect a flawless wheel.

I'd buy them again in a heartbeat. I'll be putting 10" wide ones with 295 tires on the back.

showwheelsusa.com

I found them when another member posted (red 67 c10 out in California, with a really nice build, I forget his handle), posted a thread with them.

I think I've seen that truck...in my garage. Lol.
Posted via Mobile Device

flashed · 09-06-2011, 10:00 PM

I went and bought new wide trim rings for my 8" ralleys and put them on my wheels .It will be a while before the truck is home from the body shop for me to put the wheels on the truck .I cant wait to get the van rallys off and get the 8" rallys on as that will mean new paint on the truck.

BMERDOC · 09-06-2011, 10:04 PM

I've got a lot done in the last two days! Many things have been checked off the list. I had to scar my rattle can paint job to do it but thats what the paint job was for. Click on the link!!

Shyguy · 09-06-2011, 10:05 PM

Monday we started doing sheet metal work on my '67 swb stepper cab. I have never done any sheet metal work myself so my son was showing me how to do it. We removed the inner and outer rockers using hammers and screw drivers, not a fun way I don't think.

I cut off the old cab corners and cut and fitted the new ones, my son tack welded them. Also he cut, fitted and tacked the driver's side floor pan.

We removed the '73 454 from my '71 along with the SM-465 to prep them to put in the '67.

I helped one of my grandsons take apart the front clip off the '71 I gave him.

Today I ordered the seals and gaskets for the SM-465 from Rock Auto.

It felt good to finally start working on the '67 and since I gave the '71 to one of my grandsons I will be able to concentrate on the '67.

ItsRandy · 09-07-2011, 12:16 AM

Started block sanding the last coat of primer on my cab. I've sprayed 2 gallons of primer on the cab and swept up at least one gallon from my garage floor. sealer and paint are next!

Tmwoodall · 09-07-2011, 01:05 AM

Quote:

Originally Posted by 67C10BUB

I think I've seen that truck...in my garage. Lol.
Posted via Mobile Device

That is the one. I h visited that page in your build thread many times. Also the name stamped in them isn't nearly as noticeable as it appears to be in photos IMO. Love the wheels.
Posted via Mobile Device

Scott Webster · 09-07-2011, 02:05 AM

Filled it with wood from Lowes. Store is a few blocks away and I managed to drive alot further

magwakeenercew2jh · 09-07-2011, 10:53 PM

Picked up my Electric Window stuff from ECE today.

Andy4639 · 09-08-2011, 05:32 PM

I ordered this kit today from "No Limit" a vendor here!

**FRENCHBLUE72** · 09-08-2011, 07:52 PM

I installed a chevy only sticker on my back window today does that count as anything???

eagleuh1 · 09-08-2011, 09:00 PM

Keep your head out of them window openings when rolling them up Magwakeener. They're pretty quick. Jim

magwakeenercew2jh · 09-08-2011, 09:16 PM

Will do, Eagle.

Unless I'm ready to end it all.

stealthy '69 · 09-08-2011, 09:35 PM

Quote:

Originally Posted by ItsRandy

Bought paint (on Friday), a close friend came over on Saturday and we block sanded my cab before the last coat of primer (only close friends will come over and help block sand). We only found a few spots that needed spot putty, we filled those and I am heading out into the garage to finish those in a few minutes. Tomorrow morning (before it gets hot) I am spraying the final coat of primer and hopefully, next weekend I will be spraying color on my cab. I have been sanding/filling/sanding/priming/block sanding/filling/priming/ block sanding etc., etc., and so on and so on for about about 8 weeks. I hope to show you all the results of all of my (and my close friend's) labor very soon.

http://67-72chevytrucks.com/vboard/a...1&d=1315178600

Looks someone was mighty thirsty before they started the paint process.

Tmwoodall · 09-08-2011, 11:06 PM

Finished prepping and got the first coat of Por-15 Chevy engine orange enamel on my small block. Top end goes on Saturday, if I can get a second coat on tomorrow night. I'll be picking up my March Track Serpentine kit saturday afternoon too!

RossRinSD · 09-09-2011, 07:19 AM

Quote:

Originally Posted by stealthy '69

http://67-72chevytrucks.com/vboard/a...1&d=1315178600

Looks someone was mighty thirsty before they started the paint process.

That should keep him up for a couple of days...

I broke down and ordered a few parts, proportioning valve and.....

a Plasma Cutter from Eastwood.

ItsRandy · 09-11-2011, 02:37 AM

Finished sanding the last coat of primer on my cab today. Built a paint booth in my garage with hi-tech 3-fan power ventilation. Paint tomorrow, I'm jazzed>

**Boog** · 09-11-2011, 01:39 PM

Quote:

Originally Posted by Andy4639

I ordered this kit today from "No Limit" a vendor here!

Andy this is the first I've seen of this. That looks like a much more effective shock angle than the other upper shock relocators give on lowered trucks.

Andy4639 · 09-11-2011, 02:03 PM

Quote:

Originally Posted by Boog

Andy this is the first I've seen of this. That looks like a much more effective shock angle than the other upper shock relocators give on lowered trucks.

Here is the link over in the Suspension area.

http://67-72chevytrucks.com/vboard/s...d.php?t=477839

**Boog** · 09-11-2011, 02:25 PM

I know you will feel the difference in ride too.

Andy4639 · 09-11-2011, 03:10 PM

Man I sure hope so! It has to be better than now.

Here is another addition I did.
New radio installed. Has HD stations, CD,SD and USB and Aux all. I have over 400 songs so far between the SD & USB. Best thing it was less than $90.00 shipped for free.

09-05-2011, 12:01 PM	#2752
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: What did you do to your truck today! Yesterday I started taking my doors apart to replace the inner bottoms and outer door skins. Sorry forgot to take pictures. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-05-2011, 03:05 PM	#2753
LadyBird Registered User Join Date: Feb 2011 Location: Denver, Co Posts: 37	Re: What did you do to your truck today! Got mine into it's permanent primer paint job Came out pretty good for "paint it in the driveway" paint job. Wheels, tires, and a lot more soon to come! ImageShack.us

09-06-2011, 08:45 PM	#2754
RossRinSD Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 98	Re: What did you do to your truck today! Ordered a MileMarker winch today... And, I should get a visit from the UPS fairy with some stuff from LMC tomorrow. Its still 104 outside. I was hoping to get a little bit more done today, but doesn't look like thats going to happen.

09-06-2011, 08:49 PM	#2755
willys72fleetside Registered User Join Date: Jul 2010 Location: Curtice,OH Posts: 81	Re: What did you do to your truck today! FINALLY, I got the paint work done all but the hood. Attached Images __________________ A USED TRUCK IS A LOVED TRUCK!

09-06-2011, 10:00 PM	#2757
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: What did you do to your truck today! I went and bought new wide trim rings for my 8" ralleys and put them on my wheels .It will be a while before the truck is home from the body shop for me to put the wheels on the truck .I cant wait to get the van rallys off and get the 8" rallys on as that will mean new paint on the truck.

09-06-2011, 10:04 PM	#2758
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: What did you do to your truck today! I've got a lot done in the last two days! Many things have been checked off the list. I had to scar my rattle can paint job to do it but thats what the paint job was for. Click on the link!! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

09-06-2011, 10:05 PM	#2759
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you do to your truck today! Monday we started doing sheet metal work on my '67 swb stepper cab. I have never done any sheet metal work myself so my son was showing me how to do it. We removed the inner and outer rockers using hammers and screw drivers, not a fun way I don't think. I cut off the old cab corners and cut and fitted the new ones, my son tack welded them. Also he cut, fitted and tacked the driver's side floor pan. We removed the '73 454 from my '71 along with the SM-465 to prep them to put in the '67. I helped one of my grandsons take apart the front clip off the '71 I gave him. Today I ordered the seals and gaskets for the SM-465 from Rock Auto. It felt good to finally start working on the '67 and since I gave the '71 to one of my grandsons I will be able to concentrate on the '67. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

09-07-2011, 12:16 AM	#2760
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Started block sanding the last coat of primer on my cab. I've sprayed 2 gallons of primer on the cab and swept up at least one gallon from my garage floor. sealer and paint are next!

09-07-2011, 02:05 AM	#2762
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: What did you do to your truck today! Filled it with wood from Lowes. Store is a few blocks away and I managed to drive alot further __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

09-07-2011, 10:53 PM	#2763
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! Picked up my Electric Window stuff from ECE today. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

09-08-2011, 05:32 PM	#2764
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today! I ordered this kit today from "No Limit" a vendor here! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-08-2011, 07:52 PM	#2765
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: What did you do to your truck today! I installed a chevy only sticker on my back window today does that count as anything??? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-08-2011, 09:00 PM	#2766
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: What did you do to your truck today! Keep your head out of them window openings when rolling them up Magwakeener. They're pretty quick. Jim

09-08-2011, 09:16 PM	#2767
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! Will do, Eagle. Unless I'm ready to end it all. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

09-08-2011, 11:06 PM	#2769
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Re: What did you do to your truck today! Finished prepping and got the first coat of Por-15 Chevy engine orange enamel on my small block. Top end goes on Saturday, if I can get a second coat on tomorrow night. I'll be picking up my March Track Serpentine kit saturday afternoon too! __________________ www.tomthetruck.blogspot.com <-- Aka build thread.



Register or Log In To remove these advertisements.

09-11-2011, 02:37 AM	#2771
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Finished sanding the last coat of primer on my cab today. Built a paint booth in my garage with hi-tech 3-fan power ventilation. Paint tomorrow, I'm jazzed> Attached Images

09-11-2011, 02:25 PM	#2774
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,955	Re: What did you do to your truck today! I know you will feel the difference in ride too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross Last edited by Boog; 09-11-2011 at 02:38 PM.

09-11-2011, 03:10 PM	#2775
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today! Man I sure hope so! It has to be better than now. Here is another addition I did. New radio installed. Has HD stations, CD,SD and USB and Aux all. I have over 400 songs so far between the SD & USB. Best thing it was less than $90.00 shipped for free. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 09-11-2011 at 05:22 PM.

Register or Log In To remove these advertisements.